バイブル JS003

BIUBLE 12V Jump Starter JS003 User Manual

モデル: JS003

導入

Thank you for choosing the BIUBLE 12V Jump Starter JS003. This device is designed to provide emergency starting power for your vehicle, as well as serve as a portable power bank and an emergency light source. Please read this manual carefully before use to ensure safe and optimal operation.

BIUBLE Jump Starter held in hand, showcasinコンパクトなサイズと携帯性も魅力です。
Image: The BIUBLE Jump Starter held in a user's hand, demonstrating its compact and portable design.

パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

  • BIUBLE 12V Jump Starter JS003
  • Cl付きスマートジャンパーケーブルamps
  • USB充電ケーブル（タイプC）
  • ユーザーマニュアル
  • 収納ケース

製品の特徴

  • High Capacity & Peak Current: 12800mAh battery with 2000A peak current, capable of starting 12V gasoline engines up to 7.0L and diesel engines up to 5.5L.
  • 多機能LEDライト: Features four modes: illumination, SOS signal, strobe, and warning light for various emergency situations.
  • 広範囲の動作温度: Designed to operate reliably in temperatures ranging from -20℃ to 60℃, ensuring performance in extreme weather.
  • パワーバンクの機能: Equipped with two smart USB output ports, including one QC3.0 fast charging port, to charge mobile devices.
  • 高度な安全保護: Incorporates 8 types of protection functions including short circuit, reverse connection, over-discharge, over-current, reverse current, reverse polarity, and overcharge protection. PSE certified for safety.
爆発した view of the BIUBLE Jump Starter showing its internal components like the 12800mAh battery, protection circuits, and ports.
画像: 爆発した view of the jump starter, detailing its internal structure including the power button, battery level indicator, Type-C input, USB output ports, LED flashlight, robust casing, jump starter port, protection measures, and the 12800mAh battery.

安全情報

次の安全上の注意事項を守ってください。

  • ジャンパーをショートさせないでくださいamps.
  • 赤と黒のCLは接続しないでくださいamp一緒に。
  • 車両のジャンプスタートを試みる前に、ジャンプスターターが少なくとも 50% 充電されていることを確認してください。
  • Remove the jumper cables from the car battery within 30 seconds after the car starts.
  • デバイスを極端な温度や直射日光に長時間さらさないでください。
  • お子様の手の届かない場所に保管してください。
  • スマートCLamp indicates an error (audible and visual alarm), disconnect immediately and check connections.
Smart jumper cables with 8 types of protection functions for the BIUBLE Jump Starter.
Image: The smart jumper cables, highlighting 8 types of protection functions including overheat, overcharge, over-discharge, constant current, magnetic field, overcurrent, reverse connection, and short circuit protection.
PSE certification and 8 types of safety protection features for the BIUBLE Jump Starter.
Image: PSE certification details and icons representing various safety features such as forced start, reverse current, overcurrent, short circuit, overheat, reverse connection, undervoltage、およびオーバーボルtage保護。

設定

Before first use, fully charge the jump starter. Use the provided USB Type-C cable to connect the jump starter to a suitable USB power adapter (not included).

  1. Connect the Type-C end of the cable to the jump starter's Type-C input port.
  2. ケーブルのもう一方の端を USB 電源に接続します。
  3. The LED indicators on the jump starter will show the charging status. All indicators will be solid when fully charged.
BIUBLE Jump Starter showing USB output ports and Type-C input for charging.
Image: The jump starter unit displaying its 12800mAh capacity, two USB output ports (QC3.0 and 5V/2.1A), and a 5V/2A Type-C input port for charging the device itself.

操作手順: 車両のジャンプスタート

車両を安全にジャンプスタートするには、次の手順に従ってください。

  1. ジャンプスターターが少なくとも 50% 充電されていることを確認します。
  2. Connect the smart jumper cable plug into the jump starter's jump port.
  3. 赤（+）clを接続しますamp 車のバッテリーのプラス（+）端子に接続します。
  4. 黒（-）clを接続しますamp 車のバッテリーのマイナス（-）端子に接続します。
  5. 接続すると、スマートCLamp's indicator light should turn green. If it flashes or shows red, check your connections or refer to the troubleshooting section.
  6. 車のエンジンを始動します。
  7. Once the engine starts, immediately remove the jumper cables from the car battery within 30 seconds. First, remove the black (-) clamp、次に赤色（+）clamp, and finally disconnect the smart cable from the jump starter.
Four-step visual guide for jump starting a car using the BIUBLE Jump Starter.
Image: A visual guide showing the four steps for jump starting: 1. Ensure 50%+ power, 2. Connect smart clamp to jump starter, 3. Connect clamps to car battery (red to positive, black to negative), 4. Start the car engine.

Video: A demonstration of how to use the BIUBLE Jump Starter to start a car with a dead battery. It shows connecting the cables, starting the engine, and using the LED light functions.

外部デバイスの充電

The jump starter can also function as a power bank to charge your electronic devices.

  • Connect your device's USB charging cable to one of the USB output ports on the jump starter (USB1 for QC3.0 fast charging, USB2 for standard 5V/2.1A charging).
  • ジャンプスターターは自動的にデバイスの充電を開始します。

LEDライトの使用

内蔵 LED ライトは、さまざまな状況に対応する複数のモードを提供します。

  • 照明モード: 電源ボタンを3秒間押し続けると懐中電灯が点灯します。
  • SOS モード: With the flashlight on, short press the power button to cycle to SOS mode (flashing S-O-S pattern).
  • ストロボモード： Short press again to cycle to strobe mode (rapid flashing).
  • 警告灯モード: Short press again to cycle to warning light mode (alternating red and blue flashes).
  • To turn off the LED light, short press until it turns off, or press and hold the power button for 3 seconds.
BIUBLE Jump Starter demonstrating its emergency LED light functions: flashlight, strobe, SOS, and warning light.
Image: The jump starter being used as a flashlight to illuminate a car engine, with icons depicting the four light modes: flashlight, strobe, SOS, and warning light.

トラブルシューティング

問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
車が始動しません。Jump starter battery is low. Incorrect clamp connection. Vehicle battery is severely damaged.Ensure jump starter is at least 50% charged. Recheck positive (+) and negative (-) connections. Consult a mechanic if the vehicle battery is beyond jump-starting.
スマートclamp indicator is red or flashing.Reverse polarity, short circuit, or other safety protection triggered.clを切断しますamps immediately. Verify correct positive (+) and negative (-) connections. Ensure clamp互いに接触していません。
ジャンプスターターが充電されません。Faulty charging cable or adapter. Input port issue.Try a different USB Type-C cable and power adapter. Ensure the cable is fully inserted into the Type-C input port.

仕様

モデル番号JS003
バッテリー容量12800mAh
ピーク電流2000A
現在の開始1000A
出力巻tage12V (for jump starting)
USB出力1（QC3.0）5V/3A, 9V/2A, 12V/1.5A
USB出力25V/2.1A
タイプC入力5V/2A
動作温度-20℃～60℃
寸法17.5 x 4 x 9 cm
重さ415グラム
対応エンジンタイプ最大7.0Lガソリン、5.5Lディーゼル
BIUBLE Jump Starter with two cars, indicating compatibility with up to 7.0L gasoline and 5.5L diesel engines.
Image: The BIUBLE Jump Starter positioned between a gasoline car and a diesel car, illustrating its compatibility with engines up to 7.0L (gasoline) and 5.5L (diesel).
BIUBLE Jump Starter showing its operating temperature range from -20°C to 60°C.
Image: The jump starter unit with visual indicators for extreme temperatures, highlighting its ability to operate in conditions from -20°C to 60°C.

メンテナンス

  • ジャンプスターターは直射日光や湿気を避け、涼しく乾燥した場所に保管してください。
  • バッテリーの健康を維持するために、使用していない場合でも 3 ～ 6 か月ごとにジャンプスターターを充電してください。
  • 柔らかく乾いた布でデバイスを拭いてください。刺激の強い化学薬品や研磨剤は使用しないでください。
  • ジャンパーケーブルを点検し、amp使用する前に毎回損傷がないか確認してください。

保証とサポート

This BIUBLE Jump Starter JS003 comes with a 24ヶ月保証 from the date of purchase. If you encounter any issues or have questions, please contact BIUBLE customer support via email. We are committed to providing satisfactory assistance.

For support, please refer to the contact information provided in your product packaging or on the official BIUBLE webサイト。

BIUBLE customer support representative ready to assist.
Image: A customer support representative, symbolizing BIUBLE's commitment to after-sales service and support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.