STANLEY Quick Flip GO Water Bottle

STANLEY Quick Flip GO Water Bottle 24 oz

取扱説明書

1. はじめに

Thank you for choosing the Stanley Quick Flip GO Water Bottle. This 24 oz insulated stainless steel bottle is designed for durability, leakproof performance, and convenient hydration on the go. Please read this manual carefully to ensure proper use and maintenance of your product.

Stanley Quick Flip GO Water Bottle, Polar, 24 oz

Image 1.1: Stanley Quick Flip GO Water Bottle (Polar, 24 oz)

2 製品の特徴

  • 二重壁真空断熱: Keeps beverages hot for up to 8 hours, cold for up to 12 hours, and iced for up to 40 hours.
  • Quick Flip Lid: Features a push-button mechanism for easy one-handed opening and a secure latch to prevent accidental spills.
  • 漏れ防止設計: Engineered to prevent leaks, making it suitable for travel and carrying in bags.
  • 耐久性のある構造: Made from 18/8 stainless steel for long-lasting use.
  • BPAフリー素材: Ensures your drinks remain safe and free from harmful chemicals.
  • お手入れ簡単: Wide mouth opening for simple hand washing, and all components are dishwasher safe.
  • Car Cup Holder Compatible: Designed to fit in most standard car cup holders.
Infographic detailing Stanley Quick Flip GO Water Bottle features: 18/8 Stainless Steel, Dishwasher Safe, Leakproof + Packable, BPA Free, Double-Wall Vacuum Insulation, Flip Straw Lid for Easy Sipping

Image 2.1: Key Features of the Quick Flip GO Water Bottle

3. セットアップ

3.1 初期洗浄

  1. Before first use, disassemble the lid from the bottle.
  2. Wash all components (bottle and lid) with warm, soapy water.
  3. Rinse thoroughly and allow to air dry completely.

3.2 組み立て

  1. すべての部品が乾いていることを確認してください。
  2. Reattach the lid to the bottle by screwing it clockwise until securely tightened.

4. 操作

4.1 ボトルに水を入れる

  1. ボトルの蓋を外します。
  2. Fill the bottle with your desired beverage. Do not overfill; leave space for the lid.
  3. Securely screw the lid back onto the bottle, ensuring it is tight to prevent leaks.

4.2 Using the Quick Flip Lid

  1. To open the mouthpiece, press the button located on the lid. The flip-top will open automatically.
  2. To close, push the flip-top down until it clicks securely into place.
  3. For added security, engage the metal latch over the button to prevent accidental opening.
Stanley Quick Flip GO Water Bottle with lid open, showing the mouthpiece

Image 4.1: Quick Flip Lid in open position

Person drinking from a white Stanley Quick Flip GO Water Bottle

Image 4.2: Demonstrating use of the Quick Flip GO Water Bottle

4.3 Temperature Retention Tips

  • For hot beverages, pre-heat the bottle with hot water for 5 minutes before filling.
  • For cold beverages, pre-chill the bottle with cold water or ice for 5 minutes before filling.
  • Ensure the lid is always securely closed to maximize temperature retention.

5. メンテナンス

5.1クリーニング手順

All components of your Stanley Quick Flip GO Water Bottle are dishwasher safe. For best results and to prolong the life of the product, hand washing is also recommended, especially for the lid's intricate parts.

手洗い:

  1. Disassemble the lid from the bottle.
  2. Wash the bottle interior with warm, soapy water using a bottle brush.
  3. Clean the lid thoroughly, paying attention to the push-button mechanism and mouthpiece, using a small brush if necessary.
  4. すべての部品をきれいな水で完全にすすいでください。
  5. 再組み立てまたは保管する前に、すべてのコンポーネントを完全に自然乾燥させてください。

食器洗い機の洗浄:

  1. Place the bottle and lid components on the top rack of your dishwasher.
  2. Use a standard dishwasher cycle.
  3. 再組み立てする前に、すべての部品が乾燥していることを確認してください。

Caution: Do not use bleach or cleaners containing chlorine. Do not place in a microwave or oven.

6。 トラブルシューティング

  • 漏れ: Ensure the lid is screwed on tightly and the flip-top is securely closed with the latch engaged. Check the silicone gasket inside the lid for proper placement and any damage.
  • 温度保持不良: Verify that the lid is fully sealed. Ensure the bottle was pre-heated or pre-chilled as recommended for optimal performance. Extreme external temperatures can affect retention.
  • 蓋の開閉が困難: Ensure the lid mechanism is clean and free of debris. If the latch is stiff, a small amount of food-grade lubricant can be applied to the hinge points.

7. 仕様

特徴詳細
ブランドスタンレー
モデル名The Quick Flip GO Bottle
容量24液量オンス
ポーラー
材料18/8ステンレススチール
寸法(幅×高さ)幅3インチ x 高さ10.9インチ
アイテム重量14.81オンス
BPAフリーはい
食器洗い機対応はい
電子レンジ対応いいえ
Diagram showing the dimensions of the Stanley Quick Flip GO Water Bottle: 10.9 inches tall and 3 inches wide at the base.

画像7.1: 製品寸法

Comparison of 24oz and 36oz Stanley Quick Flip GO Water Bottles, showing temperature retention times: 24oz keeps hot for 8 hrs, cold for 12 hrs, iced for 40 hrs. Both are car cup holder compatible.

Image 7.2: Temperature Retention and Size Comparison

8.保証とサポート

STANLEY products are built to last a lifetime. Since 1913, STANLEY has promised to provide capable gear for food and drink, built to last. This commitment is backed by a 生涯保証.

For warranty claims or product support, please refer to the official STANLEY webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証の有効性を確認するため、購入証明書を保管してください。

詳細については、以下をご覧ください。 www.stanley1913.com

© 2026 STANLEY. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.