1. 重要な安全上の注意事項
警告:この電動工具に付属しているすべての安全上の警告、指示、図、および仕様をお読みください。 下記の指示に従わないと、感電、火災、重傷を負う可能性があります。
- 個人の安全: チェーンソーを操作するときは、必ず安全メガネ、手袋、聴覚保護具などの適切な個人用保護具 (PPE) を着用してください。
- 作業エリアの安全性: 作業場は清潔に保ち、十分な明るさを確保してください。可燃性液体、ガス、粉塵など、爆発性雰囲気下では電動工具を使用しないでください。
- 電気安全: アースされた表面や接地面への身体の接触を避けてください。電動工具を雨や濡れた場所に放置しないでください。
- Tool Operation Safety: Ensure the safety switch is engaged to prevent accidental starts. Always hold the chainsaw firmly with one hand during operation. Keep hands and body clear of the chain.
- バッテリーの安全性: Use only the specified charger and battery pack. Do not short-circuit the battery or expose it to high temperatures.
- キックバック防止: キックバックに注意してください。キックバックは、ガイドバーの先端が物体に接触したとき、または木材が切断中にソーチェーンを挟み込んだときに発生することがあります。
2.製品オーバーview
The GOXAWEE 20V 4 Inch Cordless Mini Chainsaw is a compact and powerful tool designed for efficient wood cutting, farming, garden, and courtyard tree trimming. Its lightweight design allows for comfortable one-handed operation.
2.1 含まれるコンポーネント
- 1 x GOXAWEE Cordless Mini Chainsaw (550W)
- 1 x 20V High Capacity Battery
- 充電器 x 1
- 2xチェーン
- 1倍 File
- ナットドライバー x 1
- 1 x Screwdriver (slotted + cross)
- ユーザーマニュアル (本書) x 1
2.2 主な特徴
- 強力なモーター: Equipped with a pure copper motor and 20V high-power battery for efficient cutting.
- 片手操作: Lightweight (0.7KG) and ergonomic design for easy handling.
- 耐久性のある構造: Features a low kickback bar and high hardness quenched chain for wear resistance and smooth cutting.
- 安全機構: Includes a bar nose sprocket for stable chain operation, a sprocket cover for emergency braking, and a safety switch to prevent accidental starts.
- 効率的な放熱: Ensures the motor runs efficiently and prolongs tool life.

Figure 1: Key features of the GOXAWEE 20V 4 Inch Cordless Mini Chainsaw.
3. セットアップ
3.1 バッテリーの取り付けと充電
- Ensure the chainsaw is turned off and the safety switch is engaged.
- バッテリー パックをチェーンソー ハンドルのバッテリー ポートに合わせます。
- カチッと音がするまでバッテリーを所定の位置にスライドさせます。
- To charge the battery, remove it from the chainsaw. Connect the charger to a power outlet and then connect the battery to the charger. Refer to the charger's indicator lights for charging status.
3.2 チェーン張力調整
安全で効率的な作業には、適切なチェーンの張りが不可欠です。チェーンはガイドバーにぴったりとフィットしつつ、手で引っ張れる程度に張る必要があります。
- チェーンソーの電源がオフになっており、バッテリーが取り外されていることを確認します。
- Loosen the nuts securing the guide bar cover using the provided nut driver.
- Adjust the chain tensioning screw (usually located on the side of the guide bar) until the chain is properly tensioned.
- Tighten the guide bar cover nuts securely.

Figure 2: Detail of the chainsaw chain and guide bar.
4. 操作手順
Before operating, ensure you have read and understood all safety instructions and that the chainsaw is properly assembled and tensioned.
4.1 チェーンソーの始動
- Hold the chainsaw firmly with one hand on the handle.
- Press and hold the safety lock button (usually located near the trigger).
- Squeeze the trigger to start the chainsaw. Release the safety lock button once the chain starts moving.
4.2 切断手順
- チェーンソーを常にしっかりと握ってください。
- Position the chainsaw so that the chain makes contact with the material to be cut.
- Apply gentle, steady pressure. Allow the chainsaw to do the work; do not force it.
- 切断方向と潜在的なキックバックに注意してください。
- For branches, cut from the top down to prevent pinching. For larger logs, make a relief cut first.

Figure 3: Demonstrating one-handed operation for light cutting tasks.

Figure 4: High-efficiency cutting in action.
5. メンテナンス
Regular maintenance ensures the longevity and safe operation of your GOXAWEE mini chainsaw.
5.1 クリーニング
- 清掃する前に必ずバッテリーを取り外してください。
- Use a brush or compressed air to remove sawdust, chips, and debris from the guide bar, chain, and motor vents.
- Wipe the exterior of the chainsaw with a damp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
5.2 チェーンケア
- シャープニング: A dull chain requires more force and can lead to kickback. Use the provided file to sharpen the chain teeth regularly. Follow the manufacturer's guidelines for sharpening angles.
- 交換: Replace the chain when it becomes excessively worn, damaged, or can no longer be sharpened effectively. Refer to the included spare chain for replacement.
- 潤滑: This chainsaw model does not require external lubrication for the chain.
6。 トラブルシューティング
チェーンソーで問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| チェーンソーが始動しない | Battery not charged or improperly installed; Safety switch not engaged; Faulty battery or charger. | Ensure battery is fully charged and correctly inserted. Press the safety lock button before squeezing the trigger. Test with a different battery if available. |
| チェーンが効率的に切れない | Dull chain; Incorrect chain tension; Chain installed backward. | Sharpen the chain or replace it. Adjust chain tension. Ensure the chain is installed with the cutting edges facing the correct direction. |
| チェーンソーが作動中に停止する | バッテリー残量が少なくなりました。過負荷保護が作動しました。 | バッテリーを充電してください。切断圧力を下げ、モーターが過熱している場合は冷却してください。 |
| 過度の振動 | チェーンが緩んでいる。チェーンまたはガイドバーが損傷している。 | チェーンの張りを調整してください。チェーンとガイドバーに損傷がないか点検し、必要に応じて交換してください。 |
If the problem persists after attempting these solutions, please contact GOXAWEE customer support.
7. 仕様
| 仕様 | 価値 |
|---|---|
| ブランド | ゴクサウィー |
| モデル番号 | G4117 |
| 電源 | 電池駆動 |
| 馬力 | 550ワット |
| アイテム重量 | 0.9キログラム |
| 含まれるコンポーネント | Chainsaw, 20V Battery, Charger, 2 Chains, File, Nut Driver, Screwdriver, User Manual |
8. 保証とサポート
For warranty information, product support, or to purchase replacement parts, please contact GOXAWEE customer service through their official website or the retailer where the product was purchased. Please have your model number (G4117) and purchase date available when contacting support.