EBTOOLS Open Face Motorcycle Helmet with UV Visor User Manual

1. はじめに

Thank you for choosing the EBTOOLS Open Face Motorcycle Helmet. This manual provides essential information for the proper setup, operation, maintenance, and safety of your helmet. Please read these instructions carefully before use to ensure your safety and the longevity of the product. Keep this manual for future reference.

2.製品オーバーview

The EBTOOLS Open Face Motorcycle Helmet is designed for comfort and protection during motorcycle and scooter rides. It features a lightweight, high-density construction, making it approximately 20% lighter than traditional helmets. The helmet includes UV-protective goggles to shield your eyes and face from harmful UV rays.

主な特徴:

• 軽量設計: Constructed from high-density materials for reduced weight and enhanced comfort.
• UV保護: Equipped with transparent UV goggles to protect eyes from sun damage.
• 快適な裏地： Soft interior lining ensures a comfortable fit for extended wear.
• Detachable Neck Scarf: A removable leather neck scarf provides versatility for different weather conditions.
• 耐久性のある構造: Made from high-quality synthetic leather, polycarbonate (PC), and foam for durability.

3. パッケージ内容

パッケージを開封したら、以下のアイテムがすべて含まれていることを確認してください。

• 1 x EBTOOLS Open Face Motorcycle Helmet
• 1 x UV Goggles (transparent)
• 1 x Detachable Neck Scarf (leather)
• ヘルメットバイザー1個

4. 仕様

5. セットアップ

5.1. Helmet Fitting

Proper helmet fit is crucial for safety and comfort. Follow these steps to ensure a correct fit:

1. 頭囲を測ります: Use a tape measure to find the circumference of your head, just above your eyebrows. This helmet is designed for head circumferences between 54-60 cm.
2. ヘルメットを試着する: Place the helmet firmly on your head. It should feel snug all around, without excessive pressure points.
3. 動きを確認する: With the chin strap unfastened, try to rotate the helmet from side to side and front to back. There should be minimal movement, and your skin should move with the helmet.
4. チンストラップを締める: Secure the chin strap firmly. It should be tight enough so that the helmet cannot be pulled off your head, but not so tight as to cause discomfort.

5.2. Attaching the UV Goggles

The UV goggles are designed to be worn with the helmet. They typically feature an elastic strap that fits around the back of the helmet.

1. Position the goggles over your eyes.
2. Stretch the elastic strap around the back of the helmet, ensuring it sits securely in the designated groove or over the helmet's edge.
3. Adjust the strap for a snug fit that holds the goggles in place without causing discomfort.

5.3. Attaching/Detaching the Neck Scarf

The helmet includes a detachable leather neck scarf for added warmth and comfort. It attaches to the helmet via snaps or a similar fastening mechanism.

• 添付する： Align the snaps on the neck scarf with the corresponding fasteners on the helmet's interior or lower edge and press firmly until secured.
• 取り外すには: Gently pull the snaps apart to remove the neck scarf.

6. 操作手順

Once the helmet is properly fitted and all accessories are attached, you are ready for use.

• Always ensure the chin strap is securely fastened before riding.
• Adjust the UV goggles for clear vision and optimal eye protection.
• Periodically check the fit of your helmet during long rides to ensure it remains snug and comfortable.
• Never ride with a loose or improperly fastened helmet.

7. メンテナンスとケア

Proper maintenance will extend the life of your helmet and ensure its protective capabilities.

7.1. ヘルメットの外側の清掃

• 柔らかくてamp cloth with mild soap and water to clean the synthetic leather and polycarbonate shell.
• Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the helmet's finish and materials.
• Dry the helmet thoroughly with a clean, soft cloth.

7.2. Cleaning the UV Goggles

• Gently wipe the goggle lenses with a soft, lint-free cloth and a specialized lens cleaner or mild soap and water.
• Do not use abrasive materials or paper towels, as they can scratch the lenses.
• Allow the goggles to air dry or gently pat dry with a microfiber cloth.

7.3. Cleaning the Interior Lining and Neck Scarf

• The interior foam lining can be spot cleaned with a damp 布と中性洗剤。
• If the neck scarf is detachable, it can be hand-washed with mild soap and air-dried. Ensure it is completely dry before reattaching.

7.4. ストレージ

• ヘルメットは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• Avoid storing the helmet near chemicals or solvents that could degrade its materials.

8. 安全情報

お客様の安全は最優先です。以下の安全ガイドラインを遵守してください。

• Always wear a properly fitted and fastened helmet when riding a motorcycle or scooter.
• This helmet is designed for recreational use and may not meet all certification standards for competitive racing or specific regional regulations. Verify local requirements.
• Inspect your helmet regularly for any signs of damage, such as cracks, dents, or worn straps. Replace the helmet immediately if any damage is found.
• Never modify your helmet in any way, as this can compromise its protective integrity.
• Avoid exposing the helmet to extreme heat or cold, as this can affect its materials.
• Even minor impacts can compromise a helmet's protective capabilities. If your helmet sustains an impact, it should be replaced, even if visible damage is not apparent.

9。 トラブルシューティング

If you encounter any issues with your EBTOOLS helmet, consider the following:

• ヘルメットが緩い感じがする: Re-check the chin strap adjustment. Ensure the helmet size is appropriate for your head circumference.
• Goggles fogging: Ensure goggles are clean. Consider anti-fog treatments if persistent.
• 着用時の不快感: Re-evaluate the fit. Ensure no pressure points. The helmet should feel snug but not painful.
• 損傷したコンポーネント: If any part of the helmet (shell, strap, goggles) is damaged, discontinue use immediately and consider replacement.

10. 保証とサポート

For warranty information or product support, please refer to the retailer's return policy or contact EBTOOLS customer service directly. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the EBTOOLS store on Amazon: EBTOOLSストア