FLEXISPOT H1W Hand-Crank Adjustable Standing Desk Instruction Manual

1. 重要な安全情報

組み立ておよびご使用の前に、このマニュアルをよくお読みください。このマニュアルは、今後の参考のために保管してください。

• 重量容量: Do not exceed the maximum weight capacity of 80 kg (176 lbs). Overloading can cause instability and potential damage.
• 安定性： Ensure the desk is stable and level on a flat surface before placing items on it and during height adjustments.
• クリアランス： Keep the area around the desk clear of obstructions during operation to prevent pinching or damage.
• 子供とペット: 事故を防ぐため、操作中は子供やペットをデスクから遠ざけてください。
• 組み立て： Follow all assembly instructions precisely. Incorrect assembly can lead to instability and injury.

2.製品オーバーview

The FLEXISPOT H1W is a hand-crank adjustable standing desk frame designed to provide a flexible and ergonomic workspace. It allows for smooth transitions between sitting and standing positions.

Figure 2.1: The FLEXISPOT H1W Hand-Crank Adjustable Standing Desk frame with a white tabletop, set up in an office environment.

主な特徴:

• スムーズな高さ調整: The innovative hand-crank system provides a smooth and quiet height adjustment experience.
• 調整可能な高さの範囲: The desk frame can be adjusted from 71 cm (27.9 inches) to 121 cm (47.6 inches).
• Customizable Frame Width: The frame extends laterally from 85 cm (33.5 inches) to 129 cm (50.8 inches) to accommodate various tabletop sizes.
• 高い耐荷重: Designed for maximum structural integrity, supporting up to 80 kg (176 lbs).
• 耐久性のある構造: Features double-walled steel tubes for enhanced strength and stability.
• Flexible Crank Installation: The hand crank can be installed on either the left or right side, or completely removed when not in use.

3. セットアップと組み立て

Assembly of the FLEXISPOT H1W desk frame is designed to be straightforward. It is recommended that one person performs the assembly.

3.1 開梱と検査

• すべてのコンポーネントを箱から慎重に取り出します。
• 梱包リストに記載されているすべての部品が揃っていて、損傷がないことを確認してください。部品が不足または損傷している場合は、直ちにカスタマーサポートにご連絡ください。
• 組み立てに必要なツールはすべてパッケージに含まれています。

3.2組み立て手順

Follow the detailed step-by-step instructions provided in the separate assembly guide included with your product. Key steps include:

1. Assemble the leg columns and feet.
2. Attach the crossbar and side brackets, adjusting the width to match your tabletop.
3. Install the hand-crank mechanism. The hand crank can be positioned on the left or right side of the desk, or removed entirely when not needed.
4. Securely attach your chosen tabletop to the assembled frame using appropriate screws (tabletop not included).

Figure 3.1: The desk frame's width can be adjusted from 850mm to 1290mm to fit various tabletops.

Figure 3.2: The hand crank offers flexible installation options, allowing it to be placed on either side or removed.

3.3 Recommended Tabletop Dimensions

• 長さ： 100cmから160cm（39.4インチから63インチ）
• 幅： 60cmから80cm（23.6インチから31.5インチ）
• 厚さ: 2cm（0.8インチ）以上

Figure 3.3: Recommended tabletop dimensions for optimal fit and stability.

4. 操作手順

The FLEXISPOT H1W desk frame features a manual hand-crank system for height adjustment.

4.1 机の高さ調整

1. Ensure the area above and below the desk is clear of any obstacles.
2. Locate the hand crank on the side of the desk.
3. To raise the desk, turn the hand crank clockwise.
4. To lower the desk, turn the hand crank counter-clockwise.
5. Adjust the desk to your desired sitting or standing height within the range of 71 cm to 121 cm.

Figure 4.1: The desk frame offers a height adjustment range from 710mm to 1210mm.

4.2重量容量

The desk frame is designed to safely support a maximum load of 80 kg (176 lbs). Distribute weight evenly across the tabletop to maintain stability.

Figure 4.2: The desk frame supports a maximum weight of 80 kg (176 lbs).

5. メンテナンス

Regular maintenance helps ensure the longevity and smooth operation of your FLEXISPOT H1W desk frame.

• クリーニング： 机のフレームを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある、刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
• 留め具: すべてのネジとボルトがしっかりと締まっているか定期的に確認してください。安定性を維持するために、必要に応じて締め直してください。
• 可動部品： The hand-crank mechanism is designed for smooth operation. If you notice any stiffness, ensure no debris is obstructing the mechanism. Do not lubricate unless specifically instructed by the manufacturer.
• 重量配分： Always distribute weight evenly on the tabletop. Avoid placing heavy items on one side only.

6。 トラブルシューティング

If you encounter any issues with your FLEXISPOT H1W desk frame, refer to the following common troubleshooting tips:

• 机がぐらぐらする:
  • すべての組み立てネジとボルトがしっかりと締められていることを確認してください。
  • Check that the desk is placed on a level surface. Adjust the leveling feet if necessary.
  • Verify that the tabletop is securely attached to the frame.
• Hand Crank is Stiff or Difficult to Turn:
  • Check for any obstructions in the crank mechanism or along the lifting columns.
  • デスクの耐荷重が 80 kg を超えないようにしてください。
  • Confirm that the crank handle is properly installed.
• Desk Does Not Adjust Height Smoothly:
  • Ensure the weight on the desk is within the specified limit and evenly distributed.
  • Inspect the lifting columns for any visible damage or foreign objects.

これらの手順を実行しても問題が解決しない場合は、FLEXISPOT カスタマー サポートに問い合わせて、さらにサポートを受けてください。

7. 仕様

8. 保証とサポート

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official FLEXISPOT webサイト。

If you have any questions or require assistance with your FLEXISPOT H1W desk frame, please contact FLEXISPOT customer service directly.