Bose Soundbar Series II

Bose Solo Soundbar Series II Instruction Manual

導入

The Bose Solo Soundbar Series II is designed to enhance your television's audio experience with clear, rich sound. This compact soundbar offers simple setup and convenient features like Dialogue Mode for improved voice clarity and Bluetooth connectivity for wireless music streaming.

This manual provides detailed instructions for setting up, operating, and maintaining your soundbar, along with troubleshooting tips and product specifications.

箱の中身

パッケージに以下のすべての項目が含まれていることを確認してください。

  • Bose Solo Soundbar Series II
  • 電源ケーブル
  • 光ケーブル
  • リモコン(電池付属)
  • ウォールブラケット
Bose Solo Soundbar Series II and included accessories

Image: The Bose Solo Soundbar Series II shown with its remote control, power cable, and optical cable.

設定

1.配置

The compact design of the Bose Solo Soundbar Series II allows for versatile placement. You can place it directly in front of your TV, ensuring it does not block the TV's remote sensor. Alternatively, use the included wall bracket to mount the soundbar flush to the wall below your TV.

Bose Solo Soundbar Series II placed under a television on a media console

Image: The Bose Solo Soundbar Series II positioned neatly below a television on a wooden media console.

2.テレビに接続する

For optimal audio quality, connect the soundbar to your TV using the supplied optical audio cable. This is the recommended connection method.

  1. 光ケーブルの一方の端を オプティカルアウト テレビのポート。
  2. 光ケーブルのもう一方の端を オプティカルイン サウンドバーの背面にあるポート。
  3. If your TV does not have an optical output, you may use an auxiliary audio cable (not included) to connect to the AUX IN サウンドバーのポート。

3. 電源接続

Connect the power cable to the soundbar's power input and then plug the other end into a wall power outlet.

The soundbar will automatically turn on when connected to power.

操作手順

Use the included remote control to operate your Bose Solo Soundbar Series II.

Bose Solo Soundbar Series II remote control

Image: The remote control for the Bose Solo Soundbar Series II, showing power, volume, Bluetooth, bass, and dialogue mode buttons.

電源オン/オフ

  • を押す 電源ボタン(⏻) on the remote to turn the soundbar on or off.

ボリュームコントロール

  • プレス ボリュームアップ(+) 音量を上げます。
  • プレス ボリュームダウン (-) 音量を下げます。
  • を押す Mute button (🔇) サウンドをミュートまたはミュート解除します。

ダイアログモード

  • を押す Dialogue Mode button (💬) to enhance vocal clarity, making dialogue easier to understand without increasing overall volume.

低音の調整

  • を押す BASSボタン to adjust the bass level. Each press cycles through available bass settings.

Bluetoothペアリング

  • を押す Bluetooth button (⚿) on the remote to enter Bluetooth pairing mode. The Bluetooth indicator on the soundbar will blink.
  • On your mobile device, enable Bluetooth and select "Bose Solo Soundbar Series II" from the list of available devices.
  • Once paired, the indicator light will glow solid blue, and you can stream audio wirelessly.

メンテナンス

To ensure the longevity and optimal performance of your Bose Solo Soundbar Series II, follow these maintenance guidelines:

  • クリーニング: Use a soft, dry cloth to clean the exterior surfaces of the soundbar. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish.
  • 換気: サウンドバーの通気口が塞がれていないことを確認してください。適切な空気の流れは過熱を防ぎます。
  • ストレージ: サウンドバーを長期間保管する場合は、電源を外して涼しく乾燥した場所に保管してください。

トラブルシューティング

サウンドバーで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
サウンドバーから音が出ない
  • サウンドバーはオフまたはミュートになっています。
  • Incorrect audio input selected on TV.
  • ケーブルが緩んでいるか、正しく接続されていません。
  • サウンドバーの電源がオンになっており、ミュートされていないことを確認します。
  • Check TV audio output settings to ensure sound is sent to the optical/auxiliary port.
  • すべてのケーブルがしっかりと接続されていることを確認します。
Poor sound quality or distorted audio
  • オーディオケーブルの損傷。
  • TV audio settings are not optimal.
  • 他のデバイスからの干渉。
  • Try a different optical or auxiliary cable.
  • Adjust TV audio settings (e.g., disable internal TV speakers, set output to PCM).
  • Move other electronic devices away from the soundbar.
  • Activate Dialogue Mode for clearer speech.
Bluetoothデバイスがペアリングされない
  • サウンドバーがペアリングモードではありません。
  • デバイスが範囲外です。
  • Bluetooth干渉。
  • Press the Bluetooth button on the remote to enter pairing mode (blinking blue light).
  • デバイスがサウンドバーから 10 メートル (33 フィート) 以内にあることを確認します。
  • 近くにある他の Bluetooth デバイスをオフにします。
  • デバイスの Bluetooth ペアリング リストをクリアして、もう一度お試しください。

仕様

特徴詳細
ブランドボーズ
モデル名Soundbar Series II
モデル番号845194-2100
欧州連合017817827355
接続技術ブルートゥース
オーディオ出力モードステレオ
取り付けタイプ壁掛け
材料合金鋼
スピーカータイプサウンドバー
特集ブルートゥース
推奨用途For televisions
対応デバイステレビ
制御方法リモート
寸法(D x W x H)7.1 cm x 54.9 cm x 7.1 cm
アイテム重量1.7キログラム
Bluetooth範囲10メートル
Bose Solo Soundbar Series II with dimensions labeled

Image: The Bose Solo Soundbar Series II with its dimensions (7.1cm height, 8.6cm depth, 54.9cm width) clearly indicated.

保証とサポート

保証情報

The Bose Solo Soundbar Series II comes with a 2年間の限定保証 ご購入日から1年間有効です。本保証は、通常の使用における製造上の欠陥および仕上がりの品質を保証するものではありません。保証請求の際は、購入証明書を保管してください。

カスタマーサポート

For further assistance, technical support, or warranty service, please visit the official Bose support website or contact their customer service. You can find contact information and FAQs on the Bose webサイト:

www.bose.com/support

© 2026 Bose Corporation. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.