導入
Thank you for choosing DAYBETTER Smart RGB LED Strip Lights. This manual provides essential information for the safe and efficient use of your new LED strip lights. These 50ft (two 25ft rolls) LED strips feature app control, IR remote control, music synchronization, and timing settings, allowing for versatile lighting in various indoor environments.
安全情報
- 電源のボリュームを確認してくださいtageは製品の要件（12V）に適合します。
- Do not connect the LED strip to 24V or AC 220V power directly.
- Avoid folding or bending the LED strip at sharp angles to prevent damage.
- Keep the product away from water and high humidity environments as it is designed for indoor use only.
- LED ストリップを可燃性物質で覆わないでください。
- 清掃またはメンテナンスの前に電源を切ってください。
パッケージ内容
パッケージにすべてのアイテムが含まれていることを確認します。
- 50ft (2 x 25ft) RGB LED Strip Lights
- 赤外線リモコン
- 電源アダプター
- LEDコントローラ
- ユーザーマニュアル（本書）
Image: Contents of the DAYBETTER LED Strip Lights package, showing the LED rolls, remote, and power supply.
設定
1. 開梱とコンポーネントの取り外しview
Before installation, familiarize yourself with the components. The video below provides an unboxing overview.
Video: An unboxing of the DAYBETTER LED Strip Lights, showing the contents and initial setup steps.
2. 表面処理
For optimal adhesion, ensure the installation surface is clean, dry, and smooth. Avoid rough or dusty surfaces.
- Clean the surface thoroughly with a dry cloth.
- Allow the surface to dry completely before proceeding.
3. Connecting the LED Strip Lights
Follow these steps to connect the LED strip to the controller and power supply:
- Connect the LED strip to the LED controller. Ensure the arrows on both connectors align.
- Connect the LED controller to the power adapter.
- 電源アダプタを適切な電源コンセントに差し込みます。
Image: Step-by-step visual guide for connecting the LED strip components.
4. Installing the LED Strips
Carefully peel off the adhesive backing and press the LED strip firmly onto the prepared surface. Apply gentle pressure along the entire length to ensure good contact. Avoid stretching the strip during installation.
画像: Example of DAYBETTER LED strip lights installed in a room, providing ambient lighting.
オペレーティング
1。 赤外線リモコン
The included 24-key IR remote allows for basic control of your LED strip lights.
- オン/オフ: ライトをオンまたはオフにします。
- 明るさ調整: 光の強度を増減します。
- 色の選択: Choose from various static colors (Red, Green, Blue, White, Orange, Yellow, Cyan, Purple, etc.).
- ダイナミックモード: Select from modes like Flash, Strobe, Fade, and Smooth for automatic color changes.
Image: The IR remote control and smartphone app interface for controlling the LED lights.
2. スマートアプリコントロール
Enhance your experience by controlling the LED lights via the dedicated smartphone app. The app offers advanced features such as music synchronization and timing settings.
- アプリをダウンロード: Scan the QR code provided in the package or search for "Apollo Lighting" or "Apollo Life" in your app store.
- Bluetooth接続：
- スマートフォンでBluetoothを有効にします。
- Open the "Apollo Lighting" app. The app will automatically connect to the LED light strip.
- If connection fails, disconnect the power cord and Bluetooth receiver, then reconnect. Close and restart the app if necessary.
- 音楽同期: The app allows the lights to change color and rhythm in sync with music played through your smartphone's microphone.
- タイミング設定: Set schedules to automatically turn the lights on/off or change colors at specific times.
Image: The music synchronization feature of the DAYBETTER LED light app in action.
メンテナンス
- クリーニング： Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners.
- ストレージ： If storing the lights for an extended period, ensure they are clean, dry, and rolled neatly to prevent damage.
- 接着剤: The adhesive is strong, but for long-term stability, especially on textured surfaces, additional clips or stronger adhesive may be required.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しない。 | Loose connection, no power, remote battery dead. | Check all connections, ensure power adapter is plugged in, replace remote battery. |
| リモコンが機能しない。 | Remote battery dead, IR receiver blocked, remote too far. | Replace remote battery, ensure clear line of sight to IR receiver, operate within range. |
| アプリはライトに接続できません。 | Bluetooth off, app glitch, power cycle needed. | Ensure Bluetooth is enabled, close and restart the app, disconnect and reconnect power to the LED strip. |
| Lights are dim or inconsistent colors. | Power supply issue, damaged LED segment. | Ensure adequate power supply. If a segment is damaged, it may require replacement of the strip. |
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | デイベター |
| モデル番号 | DB50111524G-DAUS0D2 |
| 長さ | 50フィート（2 x 25フィートロール） |
| LEDタイプ | 5050 RGB LEDチップ |
| 制御方法 | App Control, IR Remote Control |
| 特集 | Color Changing, Dimmable, Music Sync, Timer Function |
| 電源 | コード式電気 |
| 巻tage | 12ボルト |
| ワットtage | 54ワット |
| 屋内/屋外での使用 | 屋内のみ |
| 材料 | LED (Shade Material: LED) |
保証とサポート
DAYBETTER products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your LED strip lights, please refer to the contact information provided on the product packaging or visit the official DAYBETTER webサイト。
You can visit the official DAYBETTER store on Amazon for more products and support: DAYBETTER Amazon Store