Modway MOD-6385-WAL-CHA

Modway Willow Queen Wood Platform Bed

Model: MOD-6385-WAL-CHA

重要な安全情報

組み立ておよびご使用の前に、すべての説明書をよくお読みください。このマニュアルは、今後の参考のために保管してください。

  • しないでください use power tools for assembly unless specifically instructed, as this may damage the product.
  • ご使用前に、すべてのボルトとネジがしっかりと締められていることを確認してください。定期的に点検し、必要に応じて締め直してください。
  • しないでください exceed the maximum weight capacity of 601 lbs (272 kg).
  • 窒息の危険を防ぐため、組み立て中は小さな部品を子供の手の届かないところに保管してください。
  • 傷がつかないように、柔らかく清潔な表面の上でベッドを組み立ててください。
  • この製品は屋内専用に設計されています。

パッケージ内容

組み立てを始める前に、すべての部品が揃っていることを確認してください。部品が不足または破損している場合は、カスタマーサポートにお問い合わせください。

  • ヘッドボード (1)
  • フットボード (1)
  • サイドレール (2)
  • センターサポートビーム(1)
  • 木製スラット(複数)
  • Support Legs for Center Beam (2-3, quantity may vary)
  • Hardware Pack (Bolts, washers, Allen wrench)

組み立て手順

正しく組み立てるために、以下の手順を慎重に実行してください。組み立てを容易にするために、2人での作業をお勧めします。

Step 1: Attach Headboard to Side Rails

Align the side rails with the headboard posts. Secure them using the provided bolts and washers. Do not fully tighten yet.

Modway Willow Queen Wood Platform Bed with Headboard and Side Rails

Image: The assembled Modway Willow Queen Wood Platform Bed, showing the headboard connected to the side rails.

ステップ2:フットボードをサイドレールに取り付ける

Connect the other end of the side rails to the footboard. Secure with bolts and washers. Now, fully tighten all bolts connecting the headboard, side rails, and footboard.

Modway Willow Queen Wood Platform Bed with Mattress

Image: The fully assembled bed frame, ready for mattress placement.

ステップ3:中央サポートビームと脚を取り付ける

Place the center support beam along the middle of the bed frame. Attach the support legs to the center beam and adjust their height so they firmly touch the floor.

Close-up of splayed wooden legs on Modway Willow Platform Bed

画像: クローズアップ view of the splayed wooden legs, indicating the bed's sturdy base.

ステップ4:木の板を置く

Evenly space the wood slats across the side rails. Some slats may have pre-drilled holes for optional attachment to the side rails. Ensure all slats are securely in place to provide proper mattress support.

Modway Willow Queen Wood Platform Bed with visible wood slats

Image: The bed frame with the wood slat support system installed, ready for a mattress.

Step 5: Adjust Headboard Height (Optional)

The headboard offers multiple height positions for a custom fit. Adjust the headboard to your desired height by repositioning the attachment bolts. Ensure both sides are at the same height and securely fastened.

Diagram showing adjustable headboard height from 41 inches to 51 inches

Image: A diagram illustrating the adjustable height feature of the headboard, showing lowest (41"H) and highest (51"H) notch positions.

操作手順

Once assembled, your Modway Willow Queen Wood Platform Bed is ready for use.

  • Place your Queen-sized mattress directly onto the wood slats. A box spring is not required.
  • Ensure the mattress is centered on the bed frame.
  • The bed is designed to support various mattress types including memory foam, latex, innerspring, and hybrid mattresses.

メンテナンスとケア

Proper care will extend the life and appearance of your platform bed.

  • クリーニング: Wipe the wood surfaces with a dry cloth. For the upholstered headboard, spot clean with a mild fabric cleaner if necessary. Avoid harsh chemicals.
  • 締め付け: すべてのボルトとネジがしっかりと締まっているか定期的に確認してください。安定性を維持するために、必要に応じて締め直してください。
  • 配置: Avoid placing the bed in direct sunlight or near heat sources to prevent wood warping or fading of upholstery.
  • 移動中: When moving the bed, lift it rather than dragging it to prevent damage to the legs and frame.

トラブルシューティング

問題が発生した場合は、次の一般的な解決策を参照してください。

  • きしみ音:
    • Check all bolts and screws and tighten them securely.
    • Ensure the center support legs are firmly touching the floor.
    • Verify that all wood slats are properly seated and not rubbing against each other or the frame.
  • 不安定さ/ぐらつき:
    • Confirm all connections are tight.
    • Ensure the bed is on a level surface. Adjust leg levelers if present, or place shims under legs if needed.
  • 破損または欠品のある部品:
    • Do not attempt to use the product with damaged or missing parts. Contact Modway customer support for replacements.

仕様

モデル番号MOD-6385-WAL-CHA
サイズ女王
製品寸法(長さ x 幅 x 高さ)長さ83インチ x 幅63.5インチ x 高さ51インチ
材料Wood (MDF, Veneer, Rubberwood), Fabric Upholstery
Walnut Charcoal
重量容量601ポンド(272kg)
組み立てが必要はい
ボックススプリングが必要いいえ

保証情報

This Modway product comes with a one-year warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

製品ビデオ

公式製品ビデオでビジュアルをご覧くださいview of the Modway Willow Platform Bed's features and design.

Video: An official Modway video showcasing the Willow Splayed Legs Bed, highlighting its design, tufted fabric detail, adjustable headboard, durable construction, and slat support system.

カスタマーサポート

For further assistance, missing parts, or warranty claims, please contact Modway customer support:

  • Webサイト: 訪問する Modway Store on Amazon 製品情報およびサポートについては、こちらをご覧ください。
  • 具体的な連絡先の詳細については、購入書類を参照してください。

© 2026 Modway. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.