パラドン PP6733MCF
Paladone Minecraft 草ブロック デジタル目覚まし時計 ユーザーマニュアル
Model: PP6733MCF
製品終了view
The Paladone Minecraft Grass Block Digital Alarm Clock is designed to bring the iconic Minecraft aesthetic to your bedside. This digital alarm clock features a light-up function and plays official Minecraft in-game music for its alarm. It displays the time, month, and day, making it a functional and decorative item for any Minecraft enthusiast.
Image: The Minecraft Grass Block Digital Alarm Clock, showing its digital display with time, month, and day.
Image: The Minecraft alarm clock illuminated, highlighting its light-up functionality and pixelated design.
設定
開梱:
Carefully remove the alarm clock from its packaging. Ensure all components, including the Micro USB cable, are present.
Image: The Minecraft alarm clock shown within its retail packaging, indicating it comes in a gift box.
電源接続:
Connect the provided Micro USB cable to the port on the back of the alarm clock. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port on a computer or wall outlet. The clock requires a stable power source for continuous operation.
Image: A Micro USB to USB power cord, approximately 150 cm (59 inches) long, shown next to the Minecraft alarm clock, indicating the power connection method.
重要な注意:
This alarm clock does not have a battery backup. If the power supply is interrupted, the time and alarm settings may reset. It is recommended to use a reliable power source.
操作手順
The alarm clock features several buttons on its top surface for setting and controlling its functions. These buttons are typically marked with symbols or slight indentations resembling Minecraft pixels.
画像: トップダウン view of the Minecraft alarm clock, highlighting the control buttons on its upper surface.
時刻と日付の設定
- Locate the "SET" button (often indicated by a gear or similar icon). Press and hold this button until the time display begins to flash.
- Use the "+" and "-" buttons (often resembling directional arrows or plus/minus signs) to adjust the hours. Press "SET" again to confirm and move to minutes.
- Adjust minutes using "+" and "-" buttons. Press "SET" to confirm and proceed to setting the year, month, and day in a similar manner.
- すべての設定が確定すると、ディスプレイの点滅が停止します。
アラームを設定する
- Locate the "ALARM" button (often indicated by a bell icon). Press and hold this button until the alarm time display begins to flash.
- Use the "+" and "-" buttons to set the desired alarm hour and then minutes.
- Press "ALARM" again to confirm the alarm time. An alarm icon (e.g., a small bell) will appear on the display, indicating the alarm is active.
- To deactivate the alarm, press the "ALARM" button once. The alarm icon will disappear.
Image: The Minecraft alarm clock with musical notes floating around it, signifying that it plays official Minecraft music as its alarm sound.
Using the Light Feature
The alarm clock functions as a light-up lamp. To activate or deactivate the light, press the designated "LIGHT" or "MODE" button (refer to the specific button layout on your device). The light will illuminate the entire grass block structure.
Image: The Minecraft alarm clock glowing from within, demonstrating its light-up feature, which can serve as a night light.
スヌーズ機能
When the alarm sounds, press the large button on the top of the clock (often the "SET" or a dedicated "SNOOZE" button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes, depending on the model).
アラームをオフにする
To completely turn off the alarm after it sounds, press any button other than the snooze button, or press the "ALARM" button to deactivate it for the next day.
メンテナンス
クリーニング：
Wipe the surface of the alarm clock with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
ストレージ：
目覚まし時計を長期間使用しない場合は、涼しく乾燥した場所に保管してください。
電力ケーブル：
Ensure the Micro USB cable is not bent or damaged. Always unplug the cable by holding the plug, not by pulling the cord.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 時計の表示が空白または機能しません。 | 電源が入っていないか、接続が緩んでいます。 | Ensure the Micro USB cable is securely plugged into the clock and a working power source. Try a different USB adapter or port. |
| アラームは鳴りません。 | Alarm not set or deactivated. Volume too low (if adjustable). | Verify the alarm time is set correctly and the alarm icon is visible on the display. Ensure the clock is powered. The alarm sound is fixed and plays official Minecraft music. |
| 時刻/日付が頻繁にリセットされます。 | 停電。 | This clock does not have a battery backup. Ensure a continuous and stable power supply. Avoid unplugging the device. |
| Light feature not working. | ライト機能が作動しません。 | Press the "LIGHT" or "MODE" button to activate the light. Ensure the clock is powered. |
仕様
- ブランド： パラドン
- モデル： PP6733MCF
- 色： 緑
- 表示タイプ: デジタル
- 特集: Alarm, Light-Up
- 製品寸法: 4.33"W x 4.33"H (approximately 11 cm x 11 cm)
- 電源: Corded Electric (Micro USB cable included, adapter not included)
- 材料： プラスチック
- 商品の重量: 280グラム（約9.9オンス）
- 必要な電池: No (operates via USB power)
- 目覚まし時計： はい
- テーマ： Video Game (Minecraft)
Image: The Minecraft alarm clock with arrows indicating its dimensions: 11 cm (4.25 inches) in width and 11 cm (4.25 inches) in height, showcasing its compact, cube-like form.
公式製品ビデオ
ビデオ: 360度 view of the Paladone Minecraft Alarm Clock, demonstrating its design and features from all angles.
保証とサポート
The Paladone Minecraft Grass Block Digital Alarm Clock comes with a 限定保証. For specific details regarding warranty coverage, duration, and claims, please refer to the warranty information provided with your product packaging or contact Paladone customer support directly.
For further assistance, troubleshooting, or product inquiries, please visit the official Paladone webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.