シェパッハ HM254

Scheppach HM254 Mitre Saw and UMF2000 Support Stand Instruction Manual

Model: HM254, UMF2000 | Brand: Scheppach

1. 重要な安全上の注意事項

電動工具を使用する際は、火災、感電、および人身事故のリスクを軽減するため、必ず基本的な安全上の注意事項を守ってください。ご使用前にすべての取扱説明書をよくお読みください。

  • 作業エリアの安全性： 作業場は清潔に保ち、十分な明るさ​​を確保してください。雑然とした場所や暗い場所は事故を招きます。可燃性の液体、ガス、粉塵など、爆発性雰囲気下では電動工具を使用しないでください。
  • 電気安全: 電動工具のプラグはコンセントのプラグに適合している必要があります。プラグを改造しないでください。アースまたは接地された表面への身体の接触を避けてください。
  • 個人の安全: 常に目の保護具を着用してください。騒音の出る工具を操作する際は、聴覚保護具を使用してください。適切な服装をし、ゆったりとした服や装飾品は避けてください。長い髪は束ねてください。
  • ツールの使用と手入れ: 電動工具に無理な力を加えないでください。用途に適した電動工具を使用してください。電動工具の調整、アクセサリの交換、保管を行う前には、必ず電源プラグを電源から抜いてください。
  • Mitre Saw Specific Safety: Ensure the blade guard is always in place and functioning correctly. Keep hands away from the cutting area. Secure the workpiece firmly before cutting. Allow the blade to reach full speed before beginning a cut.
  • レーザーの安全性： Do not stare directly into the laser beam. Avoid directing the laser beam at other persons or reflective surfaces.

2.製品オーバーview

The Scheppach HM254 Mitre Saw is a powerful tool designed for precise cutting of wood, plastic, and aluminum. It comes bundled with the UMF2000 Support Stand for enhanced stability and versatility.

キット内容:

  • Scheppach HM 254 Mitre Saw
  • HW 48T Saw Blade
  • HW 60T Saw Blade
  • Scheppach UMF 2000 Support Stand

主な特徴:

  • 強力なモーター: 2000W motor for versatile cutting tasks.
  • Precision Laser Guide: Integrated laser for accurate cutting line indication.
  • Wide Cutting Capacity: Up to 340 mm cutting width and 90 mm cutting height.
  • ソフトスタート： Ensures a smooth and controlled start-up.
  • 耐久性のある構造: Stable and lightweight die-cast aluminum frame.
  • 安全性の強化: Fully enclosed blade guard.
  • UMF2000 Support Stand: Provides ergonomic working height, lightweight yet sturdy construction, universal machine grip, and a maximum load capacity of 250 kg. Features extendable side supports for long workpieces.
Scheppach HM254 Mitre Saw and UMF2000 Support Stand
Figure 1: Scheppach HM254 Mitre Saw with UMF2000 Support Stand. This image displays the complete product package, including the mitre saw and its accompanying support stand, highlighting their combined functionality.

3. セットアップ

開梱と検査：

  1. パッケージからすべてのコンポーネントを慎重に取り出します。
  2. Verify that all listed kit contents are present.
  3. Inspect all parts for any signs of shipping damage. Do not operate the tool if damage is found.

HM254 Mitre Saw Assembly:

  1. ブレードの取り付け: Ensure the saw is unplugged. Open the blade guard. Carefully mount the desired saw blade (HW 48T for general purpose, HW 60T for finer cuts) onto the arbor, ensuring the rotation direction matches the arrow on the guard. Secure with the arbor nut.
  2. ベースマウント: Secure the saw to a stable workbench or the UMF2000 support stand using appropriate bolts and nuts.
  3. 調整: Familiarize yourself with the miter angle, bevel angle, and depth adjustment mechanisms. Refer to the markings for common angles.
  4. レーザーアライメント: The laser guide is pre-calibrated, but check its alignment with a test cut on scrap material. Adjust if necessary according to the detailed instructions in the full manual.
Scheppach HM254 Mitre Saw with two saw blades
Figure 2: Scheppach HM254 Mitre Saw with included saw blades. This image shows the mitre saw alongside the two different saw blades (48T and 60T) provided, illustrating the blade options for various cutting tasks.

UMF2000 Support Stand Assembly:

  1. 脚のセットアップ: Unfold the legs of the UMF2000 stand and ensure they are securely locked in place.
  2. Attaching the Saw: Place the HM254 mitre saw onto the universal adjustable machine grips of the UMF2000 stand. Secure the saw using the provided clampまたはボルト。
  3. Adjusting Support Arms: Extend the side support arms to the desired length for supporting long workpieces. Adjust the height of the support rollers to match the saw's cutting surface.
Scheppach UMF2000 Support Stand
Figure 3: Scheppach UMF2000 Support Stand. This image displays the UMF2000 support stand in its assembled state, highlighting its extendable arms and sturdy construction, ready to support a mitre saw.

4. 操作

一般的な操作:

  1. 電源接続: Connect the saw to a 230V power supply. Ensure the power outlet is properly grounded.
  2. 材料適合性: The HM254 is suitable for cutting wood, plastic, and aluminum. Always use the appropriate blade for the material.
  3. ワークピースの固定: 常にclamp the workpiece firmly to the fence and table before making any cut. Never hold the workpiece by hand.

切断手順:

  • マイターカット: Adjust the turntable to the desired angle (left or right). Lock the turntable securely.
  • ベベルカット: Adjust the saw head to the desired bevel angle (typically left only for this model). Lock the saw head securely.
  • 複合カット: Combine miter and bevel adjustments for complex angles.
  • レーザーガイドの使用: Activate the laser to project a cutting line onto the workpiece. Align the workpiece with this line for precise cuts.
  • カットする: With the workpiece secured, depress the trigger to start the saw. Allow the blade to reach full speed (soft start will manage this smoothly). Slowly lower the saw head through the material. Once the cut is complete, release the trigger and allow the blade to stop completely before raising the saw head.
Scheppach HM254 Mitre Saw on a workbench with wood
Figure 4: Scheppach HM254 Mitre Saw in a workshop setting. This image shows the mitre saw positioned on a workbench with various pieces of wood, demonstrating its intended use for woodworking tasks.

5. メンテナンス

Regular maintenance ensures the longevity and safe operation of your Scheppach HM254 Mitre Saw and UMF2000 Support Stand.

クリーニング：

  • Sawdust Removal: After each use, disconnect the saw from power and use a brush or vacuum cleaner to remove sawdust and debris from the motor vents, blade guard, and table.
  • ブレードクリーニング: Periodically clean the saw blade to remove resin and pitch buildup, which can affect cutting performance. Use a suitable blade cleaner.

ブレードの交換:

  1. 安全第一: 刃を交換する前に必ず鋸のプラグを抜いてください。
  2. 古いブレードを取り外す: Use the provided wrench to loosen the arbor nut while holding the blade still with the blade lock button. Carefully remove the old blade.
  3. 新しいブレードをインストールします: Place the new 255mm blade onto the arbor, ensuring the teeth are oriented correctly for cutting (matching the rotation arrow). Tighten the arbor nut securely.

潤滑:

Periodically apply a light machine oil to moving parts, such as the sliding mechanism and pivot points, to ensure smooth operation. Avoid lubricating electrical components.

ストレージ：

Store the saw and stand in a clean, dry, and secure location, out of reach of children. Protect the blade from damage during storage.

6。 トラブルシューティング

This section addresses common issues you might encounter during the operation of your mitre saw.

  • のこぎりが始動しない:
    • 電源コードが通電しているコンセントにしっかりと差し込まれているかどうかを確認してください。
    • 回路ブレーカーが落ちていないことを確認してください。
    • Ensure the safety switch or trigger lock is fully engaged.
  • 不正確なカット:
    • 刃が鈍くなっていたり損傷していたり​​しないか確認し、必要に応じて交換してください。
    • ワークピースが cl であることを確認しますamped securely and not shifting during the cut.
    • Verify that all angle adjustments (miter, bevel) are locked tightly.
    • Calibrate the laser guide if it appears misaligned.
  • 過度の振動や騒音：
    • Inspect the blade for damage, missing teeth, or improper installation.
    • Ensure all mounting bolts for the saw and stand are tight.
    • Check for any loose components or debris within the saw mechanism.
  • Blade Binding in Material:
    • Ensure the workpiece is properly supported and not pinching the blade.
    • Do not force the saw; allow the blade to cut at its own pace.
    • Check if the blade is dull or has excessive resin buildup.

7. 仕様

Scheppach HM254 Mitre Saw:

  • 入力電力: 2000W
  • 巻tage: 230V
  • ブレード直径: 255ミリメートル
  • Blade Rotation Speed: 4500 回転
  • Cutting Width (90°/90°): 340×90ミリ
  • Cutting Width (90°/45°): 340×45ミリ
  • Cutting Width (45°/90°): 240×90ミリ
  • Cutting Width (45°/45°): 240×45ミリ
  • 寸法（長さ×幅×高さ）： 770 x 595 x 590 ミリメートル
  • 重さ： 14.3キロ
  • ブレード材質: Aluminum Oxide (for included blades)
  • 表面の推奨事項: Aluminum, Plastic, Wood

Scheppach UMF2000 Support Stand:

  • 最大耐荷重： 250キロ
  • Length (Extendable Supports): 1160～2000mm
  • Height with Support Arm: 900ミリメートル
  • テーブル幅: 最大375mm
  • 重さ： 13.5キロ

8. 保証とサポート

Scheppach products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty against defects in materials and workmanship.

For warranty claims, technical support, or spare parts, please contact your authorized Scheppach dealer or visit the official Scheppach web詳細な連絡先情報については、サイトをご覧ください。

保証のために購入証明書を保管してください。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.