Netcomm ワイヤレス インターネット ルーター IFWA 40 ユーザー マニュアル

導入

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Netcomm Wireless Internet Router IFWA 40. This device is designed to provide reliable 4G LTE Wi-Fi connectivity, allowing you to connect up to 20 devices and create a Wireless Local Area Network (WLAN) anywhere.

製品終了view

フロントパネルインジケーター

The front panel of the IFWA 40 features several LED indicators that provide status information about the device's operation.

• 電源LED: デバイスの電源状態を示します。
• Voicemail LED: Indicates new voicemail messages (if phone service is configured).
• Wi-Fi LED: Wi-Fi ネットワークのステータスを表示します。
• 情報LED： Provides general status or notification alerts.
• バッテリーLED： Displays the battery charge level and charging status.
• Signal Bars: Indicates the strength of the 4G LTE cellular signal.

図1: 前面 view of the Netcomm IFWA 40 Wireless Internet Router, showing the AT&T logo and a row of LED indicators for power, voicemail, Wi-Fi, information, battery, and signal strength.

図2: もう一つの戦線 view of the Netcomm IFWA 40 Wireless Internet Router, highlighting its compact design and the arrangement of the status indicator lights.

背面パネルのポートとボタン

背面パネルには接続オプションとコントロール ボタンがあります。

• LANポート: One Gigabit Ethernet (1000Mbps) port for wired network connections.
• 電話ポート: Two Analog Phone Jacks for connecting landline phones.
• オン/オフボタン: Power button for turning the device on or off.
• 電源ポート： AC電源アダプターを接続します。
• リセットボタン: デバイスを工場出荷時の設定にリセットするために使用されます。
• アンテナポート: Two SMA cellular antenna ports for external antennas to improve signal reception.

図3：背面 view of the Netcomm IFWA 40 Wireless Internet Router, displaying the LAN port, two phone ports, power input, on/off button, reset button, and two external antenna ports.

サイドパネル

The side of the device features a WPS button for easy Wi-Fi Protected Setup.

• WPS ボタン: For quickly connecting WPS-compatible devices to the Wi-Fi network without entering a password.

図4：側面 view of the Netcomm IFWA 40 Wireless Internet Router, showing the WPS (Wi-Fi Protected Setup) button.

全体図

Figure 5: Comprehensive diagram illustrating the various components and ports of the Netcomm IFWA 40 Wireless Internet Router, including front panel LEDs, rear ports (Ethernet, Phone, AC Adapter, Antenna), and the Battery/SIM Tray location.

設定

1.SIMカードを挿入します

The Netcomm IFWA 40 uses a Nano SIM card. Locate the SIM card slot, typically found under the battery cover or in a dedicated tray. Carefully insert your activated Nano SIM card into the designated slot until it clicks into place.

2. 電源を入れる

Connect the provided AC power adapter to the Power port on the rear of the router and then plug the adapter into a wall outlet. The Power LED on the front panel should illuminate.

3. デバイスの電源を入れる

Press the On/Off button on the rear panel to power on the router. Wait for the device to boot up. The Signal bars LED should eventually show signal strength, indicating a successful connection to the 4G LTE network.

4.デバイスを接続します

• Wi-Fi： Locate the Wi-Fi network name (SSID) and password, usually found on a label on the bottom of the router. Connect your Wi-Fi enabled devices (phones, tablets, laptops) to this network. The router supports dual-band Wi-Fi and can connect up to 20 devices simultaneously.
• イーサネット： For wired connections, connect an Ethernet cable from the LAN port on the router to your computer or other network device.
• 電話： Connect analog phones to the Phone ports if you are using the voice service feature.

5. Access Control Panel

To manage settings, access the router's control panel by opening a web browser on a connected device and navigating to att.wirelessinternet or 192.168.0.1. Log in using the default credentials (usually found on the router's label or in the quick start guide).

操作手順

Wi-Fi接続

The router provides a robust Wi-Fi network. Ensure your devices are within range for optimal performance. The dual-band Wi-Fi allows for flexible connection options, with 10 devices per band for a total of 20 Wi-Fi connections.

WPS機能

For quick and secure Wi-Fi connections with WPS-compatible devices, press the WPS button on the side of the router, then activate WPS on your client device within two minutes.

バッテリーバックアップ

The Netcomm IFWA 40 includes a removable 3000mAh Li-ion battery. In the event of a power outage, the device can operate on battery power for up to 29 hours in standby mode and provide up to 180 minutes of active use time.

メンテナンス

• クリーニング： Use a soft, dry cloth to clean the exterior of the router. Avoid using liquid cleaners or aerosols.
• 換気： Ensure the router is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• ファームウェアの更新： Periodically check the router's control panel for available firmware updates to ensure optimal performance and security.
• バッテリーのケア： If the device is not used for extended periods, it is recommended to fully charge the battery and store it in a cool, dry place.

トラブルシューティング

インターネット接続なし

• Check the Signal bars LED on the front panel. If no signal is present, try repositioning the router or connecting external antennas.
• Ensure your Nano SIM card is properly inserted and activated with your service provider.
• Verify that the router's power adapter is securely connected and the Power LED is on.
• ルーターの電源をオフにしてから再度オンにして再起動します。

Wi-Fi接続の問題

• Ensure the Wi-Fi LED is illuminated.
• Check that you are entering the correct Wi-Fi password (SSID and password are on the router's label).
• Try moving closer to the router to improve signal strength.
• If many devices are connected, try disconnecting some to see if performance improves.

デバイスが応答しない

• If the router becomes unresponsive, press and hold the Reset button on the rear panel for about 10 seconds to restore factory default settings. 注記： This will erase all custom settings, including Wi-Fi name and password.

仕様

保証とサポート

This Netcomm Wireless Internet Router IFWA 40 is a renewed product. As such, it is covered by the Amazon再生品保証. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under this guarantee. Please refer to the Amazon Renewed program terms and conditions for full details regarding warranty coverage and support for renewed products.

For further assistance, please contact Amazon customer support or refer to the Amazon Renewed program documentation.