Bolyguard BG310-M 4G LTE 18MP APP Trail Camera User Manual

導入

The Bolyguard BG310-M is a compact and advanced 4G LTE trail camera designed for remote monitoring and surveillance. This device captures high-resolution 18MP still images and 720P video recordings. Its integrated 4G module enables rapid transmission of captured media to a designated email address or mobile phone, even in areas with limited network signal strength. The camera's small form factor facilitates discreet placement, making it suitable for various outdoor monitoring applications. It supports the Molnus cloud service for convenient data management and can be powered by two 18650 lithium batteries (not included), with an option for solar charging to extend operational life.

図1: フロント view of the Bolyguard BG310-M trail camera, highlighting its compact design and key features such as 18MP/HD 720P resolution, solar panel compatibility, 100ft detection range, and 940nm black IR LEDs.

主な特徴

• 4G/LTE Connectivity: Enables fast transmission of photos and videos.
• Molnus Cloud Service Support: For remote management and data storage.
• 高解像度画像: Captures 18 Megapixel still images and 720P video.
• 拡張検出範囲: Detects motion and illuminates up to 100 feet.
• 目に見えない夜間視力: Equipped with 940nm LEDs for discreet nighttime recording.
• 柔軟な電源オプション: Operates on 2*18650 lithium batteries (not included) and supports external solar power.

セットアップガイド

Follow these steps to prepare your Bolyguard BG310-M camera for operation.

1. バッテリーの取り付け： Open the battery compartment. Insert two 18650 lithium batteries (not included) according to the polarity indicators. Ensure they are fully charged for optimal performance.
2. SIM カードの挿入: Locate the SIM card slot. Insert a 4G-enabled SIM card with an active data plan. Ensure the SIM card is correctly oriented as indicated on the camera.
3. SDカードを挿入します: Locate the SD card slot. Insert a compatible SD card (up to 32GB, Class 10 recommended) into the slot. It is recommended to format the SD card using the camera's menu before first use.
4. アンテナを取り付ける: Screw the provided 4G antenna onto the antenna port located on the top of the camera. Ensure it is securely fastened.
5. 電源オン: Switch the camera to the "SETUP" mode using the power switch. The internal screen will illuminate.
6. 初期設定:
   • 正しい日付と時刻を設定してください。
   • Configure network settings (APN, server details) as required by your SIM card provider.
   • Set up your desired email address or phone number for photo/video transmission.
   • Adjust camera settings such as photo resolution, video length, PIR sensitivity, and shooting delay.
7. Molnus App Setup: Download the Molnus app on your smartphone. Register an account and add your camera by scanning the QR code or entering the device ID. This allows for remote control and viewing。

図2: 側 view of the Bolyguard BG310-M camera, illustrating the control panel with the screen and navigation buttons used for setup and configuration.

操作手順

Once the camera is set up, you can begin monitoring.

1. Switch to "ON" Mode: After completing all settings in "SETUP" mode, switch the power switch to "ON". The camera will enter monitoring mode after a short countdown. The indicator light will flash and then turn off, indicating the camera is actively monitoring.
2. 監視モード:
   • 写真モード： 動きが検出されると静止画をキャプチャします。
   • ビデオモード: 動きが検出されるとビデオクリップを記録します。
   • 写真 + ビデオ モード: 動きが検出されると、静止画をキャプチャし、続いてビデオ クリップをキャプチャします。
   Select your preferred mode in the camera's settings menu.
3. Remote Control via Molnus App: Use the Molnus app on your smartphone to:
   • カメラの設定をリモートで変更します。
   • Request real-time photos.
   • Check camera status (battery level, signal strength, SD card space).
   • View キャプチャした写真やビデオ。
4. Image and Video Retrieval:
   • Via Email/Phone: Photos will be sent to the configured email address or phone number immediately after capture.
   • Via Molnus App: Access and download captured media directly from the app.
   • SDカード経由: To retrieve all original high-resolution files, remove the SD card from the camera and insert it into a computer or card reader.

メンテナンス

Regular maintenance ensures the longevity and optimal performance of your trail camera.

• バッテリー管理:
  • Check battery levels regularly, especially when using the camera in cold environments, as battery performance can decrease.
  • Replace or recharge 18650 lithium batteries as needed.
  • If using a solar panel, ensure it is clean and positioned to receive maximum sunlight.
• クリーニング：
  • カメラレンズとPIRセンサーウィンドウは、柔らかく糸くずの出ない布で優しく拭いてください。研磨剤や刺激の強い化学薬品の使用は避けてください。
  • カメラハウジングを汚れ、ほこり、ゴミから守ってください。
• SDカードのメンテナンス:
  • Periodically format the SD card using the camera's menu to prevent data corruption and ensure optimal recording performance.
  • Ensure the SD card is not full; delete old file必要に応じてカードを交換してください。
• ファームウェアの更新： Bolyguardの公式をチェック website or Molnus app periodically for any available firmware updates. Follow the provided instructions carefully to update the camera's software.

トラブルシューティング

一般的な問題の解決策については、このセクションを参照してください。

カメラの電源が入らない:

• Check if the 18650 batteries are inserted correctly with the correct polarity.
• バッテリーが完全に充電されていることを確認してください。
• 電源スイッチが「SETUP」または「ON」の位置にあることを確認します。

No images or videos are captured:

• SD カードが正しく挿入されており、十分な空き容量があることを確認してください。
• Format the SD card in the camera's menu.
• Check the PIR sensitivity settings; increase if necessary.
• カメラが「SETUP」モードではなく「ON」モードになっていることを確認します。

Images/videos are not being transmitted:

• Check the 4G signal strength displayed on the camera screen or Molnus app.
• Ensure the SIM card has an active data plan and sufficient credit.
• Verify APN and network settings are correctly configured for your SIM provider.
• Confirm the recipient email address or phone number is correct in the camera settings.
• 電子メールのスパムフォルダを確認してください。

画像またはビデオの品質が悪い:

• カメラのレンズとPIRセンサーウィンドウを清掃します。
• カメラが揺れないようにしっかりと取り付けられていることを確認してください。
• Check the camera's resolution settings.
• For night images, ensure there are no obstructions blocking the IR LEDs.

仕様

保証とサポート

Warranty information for the Bolyguard BG310-M camera is typically provided with your purchase documentation. Please refer to the warranty card or contact your retailer for specific details regarding coverage and terms.

For technical support, additional resources, or the latest firmware updates, please visit the official Bolyguard webサイトまたは顧客サービス部門に連絡してください。