導入
This manual provides essential information for the safe assembly, operation, and maintenance of your Intex 10 ft x 30 in Beachside Metal Frame Pool Set. Please read all instructions carefully before setting up and using the pool. Retain this manual for future reference.
Image: A family enjoying the Intex 10 ft x 30 in Beachside Metal Frame Pool Set in a backyard. The pool features a blue liner with a beachside print.
安全情報
Always supervise children in and around the pool. Drowning can occur quickly and silently. Ensure all users understand basic pool safety rules. Do not dive or jump into the pool. The pool is not designed for diving. Keep electrical devices away from the pool area. Always use ground fault circuit interrupters (GFCI) for all electrical equipment connected to the pool.
- 決して子供を一人にしないでください。
- No diving or jumping.
- Keep electrical devices away from water.
- Ensure proper fencing or barriers are in place according to local regulations.
パッケージ内容
Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer service.
- Pool Liner (with Beachside print)
- Metal Frame Components (horizontal beams, vertical legs, pins)
- Filter Pump (as shown in images)
- ホースとClampフィルターポンプ用
- 取扱説明書
Image: A gray Intex filter pump with white hoses and clamps, a common accessory for maintaining pool water clarity.
敷地の準備
Proper site preparation is crucial for the stability and longevity of your pool. Choose a level, solid surface free from sharp objects, debris, or excessive slopes. The area should be large enough to accommodate the pool and provide adequate space around it for safe access.
- 平地: The pool must be placed on perfectly level ground. An uneven surface can cause the pool to collapse, leading to serious injury or property damage.
- クリアエリア： Remove all rocks, sticks, roots, and other sharp objects.
- 排水： Ensure the area has good drainage to prevent water accumulation around the pool base.
- ユーティリティへの近さ: Position the pool near a suitable electrical outlet for the filter pump, ensuring it is GFCI protected.
組み立て手順
組み立てには通常2人以上の大人が必要です。以下の手順を慎重に行ってください。
- コンポーネントを解凍します: Lay out all pool liner and frame parts on a clean, soft surface to prevent damage.
- Spread Liner: Carefully spread the pool liner on the prepared level ground. Ensure the drain plug is positioned correctly for future draining.
- 水平梁を組み立てる: 水平ビームをプール ライナーの上端にあるスリーブに挿入します。
- Connect Vertical Legs: Attach the vertical legs to the horizontal beams using the provided pins. Ensure all connections are secure.
- Form the Frame: Continue connecting all frame components until the circular structure is complete and stable.
- しわを滑らかにする: Once the frame is assembled, gently pull the liner outwards from the center to remove any wrinkles from the bottom.
Image: An Intex Beachside Metal Frame Pool set up on grass, showcasing the blue liner with a starfish pattern on the bottom.
Filling and Operating
After assembly, the pool is ready for filling and initial operation.
- 水で満たします: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles on the bottom of the liner. Fill the pool to the recommended fill line, typically indicated on the liner or in the manual. Do not overfill.
- フィルターポンプを接続します: Once the pool is partially filled (enough to cover the inlet/outlet fittings), connect the filter pump hoses to the pool's inlet and outlet connections. Ensure all connections are tight and secure to prevent leaks.
- Prime and Start Pump: Follow the filter pump's specific instructions for priming and starting. Ensure the pump is operating correctly and circulating water.
- 水処理: Add appropriate pool chemicals (e.g., chlorine, pH adjusters) according to manufacturer instructions and test the water regularly to maintain proper balance and sanitation.
メンテナンス
Regular maintenance is essential for clean water and extending the life of your pool.
- 水の化学: Test water pH and chlorine levels daily. Maintain pH between 7.2-7.6 and chlorine levels between 1-3 ppm.
- フィルターポンプの操作: Run the filter pump for at least 4-6 hours daily to ensure proper water circulation and filtration.
- フィルターカートリッジのクリーニング/交換: Clean the filter cartridge every few days by rinsing with a garden hose. Replace the cartridge every 2-4 weeks, or more frequently if the water is heavily used or dirty.
- スキミングと掃除機による吸引： Remove debris from the water surface daily using a skimmer net. Vacuum the pool bottom as needed to remove settled dirt.
- プールカバー: Use a pool cover when the pool is not in use to prevent debris from entering and reduce water evaporation.
ストレージ
At the end of the swimming season, properly store your pool to protect it from damage and prolong its lifespan.
- Drain Pool: Completely drain the pool using the drain plug. Ensure all water is removed.
- Clean Liner: Thoroughly clean the pool liner with mild soap and water. Rinse completely and allow it to air dry. Ensure it is completely dry before folding to prevent mold and mildew.
- フレームを分解する: Carefully disassemble the metal frame components. Clean and dry all parts.
- ストアコンポーネント: Store the liner, frame parts, and filter pump in a dry, cool place, protected from extreme temperatures and pests.
トラブルシューティング
一般的な問題とその解決策については、このセクションを参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 曇った水 | ろ過が不十分、化学バランスが不適切、有機負荷が高い。 | Run filter longer, check/adjust pH and chlorine, shock treat pool, clean/replace filter cartridge. |
| 藻類の成長 | Low chlorine, poor circulation, high phosphates. | Shock treat with chlorine, brush pool walls, run filter continuously, add algaecide. |
| ポンプが機能しない | 電力の問題、インペラの詰まり、システム内の空気。 | Check power connection/GFCI, clear debris from impeller, prime pump. |
| 水漏れ | ホースの接続が緩んでおり、ライナーに小さな穴が開いています。 | ホースを締めるamps, inspect liner for holes and use a repair patch kit. |
仕様
- モデル番号: 28208GN
- プールタイプ: 金属フレームプール
- 形： ラウンド
- 寸法（直径x高さ）： 10 ft x 30 in (305 cm x 76 cm)
- 材料： Durable PVC liner with a galvanized steel frame
- Capacity (at 90% fill): 約1,470ガロン（5,560リットル）
- 組み立てが必要: はい
- 特別な機能: Photorealistic ocean print on liner
Image: A cutaway diagram illustrating the three-ply construction of the Intex pool liner, showing two outer layers of heavy-gauge PVC laminated to an inner layer of polyester mesh for reinforcement.
保証とサポート
Intex製品は、高品質の素材と職人技を用いて製造されています。保証の詳細については、製品に付属の保証書、またはIntexの公式ウェブサイトをご覧ください。 website. For technical support, replacement parts, or further assistance, please contact Intex customer service directly. Keep your proof of purchase and model number handy when contacting support.