1.製品オーバーview
The SuperlightingLED DC12V RGB CCT LED Strip Light is a versatile, non-waterproof flexible LED tape light designed for various indoor lighting applications. It features a dual-row design with SMD 5050 LEDs for RGB colors and SMD 2835 LEDs for adjustable warm white (2700K) to daylight white (6000K) illumination. With a high CRI 90+, it ensures accurate color rendering.
主な特徴:
- RGBCCT Full Color + High CRI 90+: Offers vibrant RGB lighting and tunable white light from 2700K to 6000K with excellent color accuracy.
- Dual Row Design, 15mm Wide: High-density configuration with 1350 LEDs per roll for superior brightness, delivering up to 24,300 lumens.
- 12V DC Powered, Cuttable & Extendable: Operates safely on 12V DC. Each 5-meter (16.4ft) roll can be cut every 9 LEDs for custom lengths.
- Flexible with Strong Adhesive Backing: Easy installation on various surfaces due to its flexibility and durable adhesive.
- 多用途なアプリケーション: Suitable for workbenches, retail displays, signage backlighting, videography, cabinet lighting, under-cabinet lighting, showcases, and trade show displays.
パッケージ内容:
- 1 x 16.4FT LED strip light
注記： This package includes only the LED strip light. A compatible 12V DC power supply and an RGBCCT controller are required for operation and must be purchased separately.
2. 安全情報
- 屋内使用のみ: This LED strip light is non-waterproof (IP20 rated) and designed exclusively for indoor applications. Do not expose to moisture, water, or outdoor elements.
- 電源： Use only a compatible 12V DC power supply. Connecting to an incorrect voltage can damage the strip and pose a safety risk.
- 電気接続: All electrical connections should be performed by a qualified individual if you are unsure. Ensure power is disconnected before making any connections or modifications.
- 切断： LEDストリップは、指定されたカットマーク（LED9個ごと）でのみ切断してください。それ以外の場所で切断すると回路が損傷し、その部分が使用できなくなります。
- 熱： While LED strips generate minimal heat, ensure adequate ventilation, especially when installed in enclosed spaces. Do not cover the strip with materials that could trap heat.
- 取り付け面 Ensure the mounting surface is clean, dry, and free of dust or grease for optimal adhesive performance.
3. 製品仕様
| 特徴 | 詳細 |
|---|---|
| LEDストリップタイプ | SMD 5050 RGB + SMD 2835 Warm White + SMD 2835 Daylight White |
| 動作温度 | -4°F (-20°C) ～ 122°F (50°C) |
| ライトカラー | RGB + Warm White + Daylight White |
| 寸法 | 16.4Ft (5m) / roll |
| 切断可能なユニット | Every 9 LEDs (12V) |
| LED数量 | 1350 LEDs / roll |
| 寿命 | 50,000時間以上 |
| Strip Dimensions (L x W x H) | 5000cm (197 in) x 1.5cm (0.59 in) x 0.25cm (0.1 in) |
| 入力ボリュームtage | 12V直流 |
| Working Power (Max) | 150W / 16.4ft (9.15W / foot) |
| Lamp 光束 | 18-20 Lumens / LED, 1,500 Lm / Ft, 24,300 Lumens / 16.4ft |
| Color Temperature CCT (White) | Warm White (2700K) to Daylight White (6000K) |
| ビームパターン | 120度 |
| 防水等級 | Non-waterproof IP20 |
| CRI（Ra>） | 90以上 |
| PCB幅 | 15mm（0.59インチ） |
| アイテム重量 | 6.4オンス |
| 制御方法 | App, Voice (with compatible controller) |
4. セットアップ手順
4.1 Components Required (Sold Separately):
- 12V DC 電源: 電源に十分なワット数があることを確認するtage for the length of the LED strip used.
- RGBCCT LED Controller: A compatible controller (e.g., RF remote or WiFi controller) is necessary to control the color, brightness, and color temperature of the strip.
Example of compatible accessories:
Wiring diagram showing connections to controller and power supply, with examp互換性のあるアクセサリのリスト。
4.2 インストール前:
- プランレイアウト: LEDストリップの希望する経路を決定します。必要な長さを測ります。
- きれいな表面: Ensure the mounting surface is clean, dry, smooth, and free of dust or oil for optimal adhesion.
- テストコンポーネント: Before permanent installation, connect the LED strip, controller, and power supply to ensure all components function correctly.
4.3 インストール手順:
- Cutting the LED Strip (if necessary):
The LED strip can be cut every 9 LEDs at the designated cut marks. Use sharp scissors to ensure a clean cut.
Illustration of LED strip cut points and dimensions.
重要な注意: The PCB width is 15mm, and the sleeve width is 17mm. Standard 6-pin quick connectors are not compatible with this width. It is recommended to cut and solder connections for custom lengths.
- LEDストリップの接続:
Connect the LED strip to the RGBCCT controller. This strip uses a 5-wire connection (DC12V+, Red, Green, Blue, Warm White, Daylight White). Ensure correct polarity and wire assignment.
Detailed wiring diagram for the RGBCCT LED strip.
- 電源の接続:
Connect the RGBCCT controller to the 12V DC power supply. Refer to the controller's manual for specific wiring instructions. - Mounting the LED Strip:
Peel off the protective backing from the strong blue adhesive on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm and even contact along its entire length.
5. 操作手順
Operation of the SuperlightingLED RGB CCT LED Strip Light requires a compatible RGBCCT controller (purchased separately). The specific functions and controls will depend on the model of controller you are using. Refer to your controller's instruction manual for detailed operating procedures.
General Operation (via compatible controller):
- 電源オン/オフ: Use the designated power button on your controller or app.
- 色の選択: Select from 16 million RGB colors using the color wheel or preset buttons on your controller/app.
RGB color display capabilities.
- 白色光調整: Adjust the white light color temperature from warm white (2700K) to daylight white (6000K).
Adjustable white light color temperatures.
- 明るさコントロール: Dim or brighten the light output to your desired level.
- Modes/Scenes: Many controllers offer pre-programmed dynamic modes or the ability to create custom scenes.
- App/Voice Control: If using a WiFi controller, you may be able to control the strip via a smartphone app or voice assistants.
Example of indoor application and app control.
6. メンテナンス
- クリーニング： Ensure the LED strip is powered off and cool before cleaning. Gently wipe the surface with a soft, dry, or slightly damp 布で拭いてください。刺激の強い化学薬品、研磨剤入りの洗剤、過度の湿気は使用しないでください。
- 検査： Periodically inspect the strip for any signs of damage, loose connections, or adhesive degradation.
- ストレージ： If storing the LED strip, ensure it is rolled neatly and kept in a dry, cool environment away from direct sunlight and extreme temperatures.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| LEDストリップが点灯しません。 | No power to the strip/controller. 配線が正しくありません。 電源またはコントローラーに障害があります。 | 電源が接続され、電力が供給されているかどうかを確認します。 Verify all wiring connections between the strip, controller, and power supply are correct and secure. Test the power supply and controller with another compatible device if possible. |
| Incorrect colors or white light. | Incorrect wiring to the controller. Controller settings are wrong. | Ensure the R, G, B, WW, DW, and 12V+ wires are connected to the correct terminals on the controller. Refer to your controller's manual to ensure it is set to the correct output mode for RGBCCT strips. |
| Section of the strip is not lighting up. | Damage to the strip. Incorrect cut. | Inspect the non-working section for physical damage. If a section was cut incorrectly (not at the designated marks), it may be permanently damaged. |
| 接着剤が付いていません。 | 表面が適切に清掃されていません。 Surface is porous or uneven. | Ensure the surface is thoroughly cleaned and dry before application. For porous or uneven surfaces, consider using additional mounting clips or stronger adhesive. |
8. 保証とサポート
8.1 保証情報:
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty duration and terms, please refer to the documentation provided with your purchase or contact the seller directly.
8.2 カスタマーサポート:
If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer for assistance. When contacting support, please have your product model number (FLSDR-RGBCCT-1350) and purchase information readily available.