1.製品オーバーview
The HUAYU Sanju SJ1755HA2B is an all-metal, high-temperature resistant fan designed for industrial and electronic cooling applications. This fan operates on 220V and is built for durability and reliable performance in demanding environments.
図1: 前面 view of the SJ1755HA2B fan, displaying the fan blades and product label.
2. 安全情報
Please read and understand all safety instructions before installing or operating this fan. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- 電気安全: 電源がファンの容量と一致していることを確認するtage (220V). Disconnect power before installation, maintenance, or troubleshooting. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
- 可動部品： Keep fingers, tools, and other objects away from the fan blades during operation. The fan blades rotate at high speed and can cause injury.
- 温度： This fan is designed for high-temperature environments, but ensure it is not exposed to temperatures exceeding its operational limits.
- 取り付け: Securely mount the fan to prevent vibration and accidental dislodgement.
3. セットアップ
Follow these steps for proper installation of the fan:
- 開梱: Carefully remove the fan from its packaging and inspect for any damage. Do not install if damaged.
- 取り付け: Position the fan in the desired location. Use appropriate screws and fasteners to secure the fan firmly to a stable surface. Ensure adequate clearance around the fan for proper airflow.
- 配線： Connect the fan's power wires to a 220V AC power source. The fan typically has two wires: one for live (L) and one for neutral (N). Refer to local wiring standards for correct connection. Ensure all connections are secure and insulated.
図2：戻る view of the SJ1755HA2B fan, illustrating the motor and wiring points.
4. 操作手順
Once properly installed and wired, the fan is ready for operation.
- 電源オン: Apply 220V AC power to the fan. The fan should begin to rotate immediately.
- 電源を切る： Disconnect the 220V AC power supply to stop the fan.
- 連続運転: This fan is designed for continuous operation in suitable environments. Monitor for unusual noises or vibrations during initial operation.
5. メンテナンス
定期的なメンテナンスにより、最適なパフォーマンスが確保され、ファンの寿命が延びます。
- クリーニング： Periodically disconnect power and gently clean the fan blades and housing to remove dust and debris. Use a soft brush or compressed air. Do not use harsh chemicals or liquids that could damage electrical components.
- 検査： Regularly inspect the fan for any signs of wear, loose connections, or damage to the blades or housing. Ensure mounting screws remain tight.
- 潤滑: This fan typically uses sealed bearings that do not require lubrication. Do not attempt to lubricate the bearings unless specified by the manufacturer.
6。 トラブルシューティング
If you encounter issues with your fan, refer to the following troubleshooting guide:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ファンが始動しない | 電源なし 配線ミス モーター故障 | 電源接続と電源を確認してください 配線図と照らし合わせて確認する サポートについてはメーカーにお問い合わせください |
| 異常な騒音や振動 | ルーズマウンティング ファンブレードの破片 ベアリングの摩耗 | 取り付けネジを締めます Clean fan blades (power off) サポートについてはメーカーにお問い合わせください |
| 空気の流れが減少 | 吸気/排気口の詰まり 汚れたファンブレード | 障害物を取り除く Clean fan blades (power off) |
If the problem persists after attempting these solutions, contact the manufacturer for further assistance.
7. 仕様
Key technical specifications for the HUAYU Sanju SJ1755HA2B fan:
- モデル番号: SJ1755HA2B (also F614R-12MC-IB Cooling fan)
- ブランド： HUAYU
- 巻tage: 220ボルト
- ワットtage: 3.6ワット
- 現在： 0.18A
- 材料： オールメタル
- ASIN: B08BR7GD1
- 国際コード: 745895971416
8. 保証とサポート
This product is covered by the manufacturer's standard warranty. For specific warranty terms, technical support, or service inquiries, please contact HUAYU customer service directly. Keep your purchase receipt as proof of purchase.