1.製品オーバーview
The KENT Supreme RO Water Purifier is designed to provide pure and safe drinking water using advanced purification technologies. It combines Reverse Osmosis (RO), Ultra Filtration (UF), and a UV LED in the storage tank, along with a TDS Control System, to ensure comprehensive water purification.
図1: 前面 view of the KENT Supreme RO Water Purifier.
This purifier is suitable for various water sources, including municipal tap water, borewell water, and tanker water, effectively removing dissolved impurities such as arsenic, mercury, lead, hardness, dissolved salts, rust, pesticides, and fluorides.
図2: マルチSの図tag精製プロセス。
The integrated TDS Control System allows for adjustment of the Total Dissolved Solids level, ensuring essential natural minerals are retained in the purified water, enhancing both health benefits and taste. The UV LED in the storage tank maintains the purity of stored water for an extended period.
Figure 3: Purified water retaining essential minerals.
2. 安全に関する注意事項
- アプライアンスを操作する前に、すべての指示をよくお読みください。
- Ensure the power supply matches the specifications mentioned on the rating label.
- Do not install the purifier in direct sunlight or near heat sources.
- 本製品を子供やペットの手の届かない場所に保管してください。
- Do not attempt to repair or modify the appliance yourself. Contact authorized service personnel.
- Always use genuine KENT spare parts for replacement.
3. インストールとセットアップ
Professional installation is recommended for the KENT Supreme RO Water Purifier. A complimentary installation service is typically included with your purchase. Please contact KENT customer service to schedule your installation.
3.1 インストール前のチェック
- 水圧: Ensure the raw water pressure is within the recommended range (0.3 - 4.0 kg/cm²).
- 水源: Confirm a suitable water inlet connection is available.
- 電源： A standard single-phase 100-240V AC, 50/60 Hz electrical outlet is required.
- 位置： Choose a wall-mounted location that is clean, dry, and away from direct sunlight or extreme temperatures.
3.2 Installation Steps (Performed by Technician)
- Mount the purifier securely on a wall using the provided mounting template and screws.
- 原水入口を浄水器に接続します。
- Connect the reject water line to a drain.
- Connect the power adapter and plug it into the electrical outlet.
- 浄水器への原水供給を開きます。
- Allow the storage tank to fill completely and then drain the first tank of purified water to flush the system. Repeat this process 2-3 times.
- Adjust the TDS controller to the desired level (if applicable).
4. 操作手順
4.1 初期起動
After professional installation and initial flushing, the purifier is ready for use. The purifier will automatically start purifying water when the water level in the storage tank drops below a certain level and stop when the tank is full.
4.2 精製水の供給
To dispense purified water, simply turn the faucet lever located at the bottom front of the purifier. Close the lever to stop the water flow.
4.3 指標の理解
Your KENT Supreme purifier may feature LED indicators for power, purification status, tank full, and filter change alerts. Refer to the specific model's front panel for detailed indicator meanings.
5. メンテナンス
Regular maintenance is crucial for the optimal performance and longevity of your KENT Supreme RO Water Purifier. Always unplug the appliance before performing any maintenance.
5.1フィルターの交換
Filters and membranes have a limited lifespan and require periodic replacement. The frequency depends on the quality of raw water and usage. It is recommended to replace filters annually or as indicated by the filter change alarm. Always use genuine KENT spare parts.
5.2 貯蔵タンクの清掃
The storage tank should be cleaned periodically, especially during filter replacement. This should be performed by a trained service technician.
5.3 外部洗浄
浄水器の外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。
Figure 4: Scan the QR code or visit kent.co.in/customerapp to verify genuine KENT service and spares.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 給水なし | No power, water inlet closed, tank empty, clogged filters. | Check power, open water inlet, wait for tank to fill, contact service for filter check. |
| 水の流れが遅い | Clogged filters/membrane, low water pressure. | Contact service for filter/membrane replacement, check raw water pressure. |
| 異常な味・臭い | Expired filters, new filter installation (initial taste). | Replace filters, flush the system by draining 2-3 tanks of water. |
| 漏れ | Loose fittings, damaged components. | Tighten fittings, contact service for inspection and repair. |
If the problem persists after attempting these solutions, please contact KENT customer support.
7. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | KENT |
| モデル名 | ケント・シュプリーム |
| 精製方法 | RO + UF + UV LED in Tank |
| 特集 | Reduce TDS, Automatic Shutoff |
| 製品寸法（長さ x 幅 x 高さ） | 40L x 25W x 52.5H センチメートル |
| 材料 | プラスチック（ABSボディ） |
| 容量 | 8リットル |
| 最大流量 | 20時間あたりXNUMXリットル |
| 動作圧力範囲 | 0.3 - 4.0 Kilograms Per Square Centimeter |
| サポートされている水のTDSレベルの最大値 | 2000PPM |
| 電源タイプ | Corded Electric (100-240 V AC, 50/60 Hz) |
| アイテム重量 | 7.6キログラム |
| インストールタイプ | 壁掛け |
| 含まれるもの | Water purifier, installation kit, user manual, warranty card |
8. 保証とサポート
The KENT Supreme RO Water Purifier comes with a 1-year free warranty from the date of purchase. This includes complimentary installation, routine health check calls, and unlimited repair visits for one year.
For service requests, genuine spares, or any queries, you can easily access KENT's service network through:
- ワッツアップ
- モバイルアプリ
- フリーダイヤル
- メール
Please refer to the warranty card and device manual for detailed disclaimers, terms, and conditions.
9. 製品ビデオ
ビデオ1: オーバーview of the KENT Supreme RO Water Purifier's features and purification process.