NIORFNIO 15W FMトランスミッター ユーザーマニュアル

1. はじめに

The NIORFNIO 15W FM Transmitter is a versatile device designed for wireless stereo broadcasting across the 87-108MHz frequency range. It is suitable for various applications including churches, cars, shopping malls, lecture halls, and private radio stations. This manual provides detailed instructions for setting up, operating, and maintaining your transmitter to ensure optimal performance.

主な機能は次のとおりです。

• Adjustable transmission frequency within 87.0 ~ 108.0MHz.
• 5W / 15W high-low power adjustment for transmission distances of 3-4 km (1.9-2.5 mi) in open air.
• Advanced modulation system with built-in PLL frequency, audio pre-emphasis, limiter, and low-pass filter circuit.
• Efficient heat dissipation via a high-quality dual ball bearing fan and optimized thermal channels.
• PC control capability via micro USB for intelligent broadcasting features like time-scheduled broadcasts.
• Includes a 1/4 wavelength magnetic sucker antenna for flexible placement and effective signal transmission.
• High-fidelity Bluetooth connectivity for wireless audio streaming from mobile devices.

図1.1: 前面 view of the NIORFNIO 15W FM Transmitter, showing the display and control knobs.

Figure 1.2: The transmitter's versatility for various applications, including private radio and public broadcasting.

2.セットアップガイド

Follow these steps to set up your NIORFNIO 15W FM Transmitter:

1. 開梱内容: Carefully remove all components from the packaging. Ensure you have the transmitter unit, magnetic sucker antenna, power adapter, and any included cables.
2. アンテナ接続： Connect the magnetic sucker antenna to the "RF-OUT" port on the back of the transmitter. Ensure the connection is secure. For optimal performance and to prevent damage, always connect the antenna before powering on the device. Position the antenna on a metal surface (e.g., car roof, balcony railing) to create a ground plane, which enhances signal transmission.
3. 電源接続: Connect the power adapter to the "12V===2A" input port on the back of the transmitter, then plug the adapter into a standard electrical outlet.
4. オーディオ入力:
   • Via Audio Jack: Connect your audio source (e.g., MP3 player, computer, mixer) to the "Audio" input jack on the front panel using a 3.5mm audio cable.
   • Bluetooth経由： Power on the transmitter. On your audio device, search for Bluetooth devices and select "NIORFNIO" to pair.
   • Via Microphone: Connect a microphone to the "MIC" input jack on the front panel.
5. PC制御（オプション）: To use PC control features, connect a micro USB cable from the "PC Control" port on the back of the transmitter to your computer. You may need to install specific drivers and software, which can typically be obtained from the manufacturer's support webサイト。

Figure 2.1: Detailed diagram of the transmitter's front and back panels, indicating ports and controls.

3. 操作手順

Once set up, operate your transmitter using the following guidelines:

1. 電源オン/オフ: Press the "Power On/off" button (circular button with power symbol) on the front panel to turn the unit on or off. The display will illuminate.
2. 周波数の調整： Use the "Up" (triangle pointing up) and "Down" (triangle pointing down) buttons to adjust the transmission frequency. The current frequency will be displayed on the LCD screen. Select a clear frequency not currently in use in your area to avoid interference.
3. オーディオの音量を調整する: Rotate the "Audio volume adjustment" knob (leftmost knob) to control the input audio level. Adjust this to prevent distortion while ensuring sufficient signal strength.
4. マイクの音量を調整します: If a microphone is connected, rotate the "Microphone volume adjustment" knob (rightmost knob) to control its input level.
5. 出力調整: The transmitter supports 5W and 15W power output modes. Refer to the device's menu or PC control software for instructions on switching between these power levels. Higher power provides greater range but consumes more energy and generates more heat.
6. Channel Switching (Stereo/Mono): The device supports switchable stereo and mono channels. This setting can typically be adjusted via the device's menu or PC control software. Stereo mode provides higher fidelity for music, while mono mode can improve clarity for voice broadcasts over long distances.
7. Bluetooth操作： After pairing, ensure your audio device's volume is set appropriately. The transmitter will broadcast the audio received via Bluetooth.
8. PC Control Software: If using the PC control software, launch the application on your computer. This software allows for advanced settings, including frequency control, power output adjustment, and scheduling of broadcasts. Ensure the transmitter is connected via USB and recognized by the software.

Figure 3.1: Illustration of the transmitter's effective range in an open-air environment.

Figure 3.2: The transmitter supports a broad frequency range from 76 to 108 MHz.

4. メンテナンス

Proper maintenance ensures the longevity and optimal performance of your FM transmitter:

• クリーニング： 本体の外側は、柔らかく乾いた布で拭いてください。液体クリーナーや研磨剤は使用しないでください。表面や内部部品に損傷を与える可能性があります。
• 換気： Ensure the ventilation openings on the unit are not blocked. The transmitter uses a dual ball bearing fan for heat dissipation; proper airflow is crucial to prevent overheating.
• アンテナのケア: Keep the antenna clean and free from obstructions. Periodically check the antenna connection for tightness.
• ストレージ： 長期間使用しない場合は、送信機を直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• ケーブル管理 Avoid kinking or sharply bending power and audio cables to prevent internal wire damage.

5。 トラブルシューティング

If you encounter issues with your transmitter, refer to the following table for common problems and solutions:

6. 仕様

7. 保証情報

This product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims procedures, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty validation.

保証期間を延長する保護プランもご用意しております。2年または3年の保護プランなどのオプションについては、販売店にお問い合わせください。

8. サポート

For technical assistance, product inquiries, or customer service, please contact VR-robot support through their official channels. You can often find support information on the product packaging, the manufacturer's website, or the retailer's product page.

追加のリソースと製品情報については、 VR-robot Store on Amazon.