導入
Welcome to the user manual for the XENOCAM L336 Universal IR Learning Remote Control. This remote is designed to consolidate control of up to three infrared (IR) devices, such as TVs, VCRs, cable boxes, DVD players, satellite receivers, and audio systems. It features digital circulation learning technology for fast and accurate programming and retains memory even after battery replacement.
Please read these instructions carefully before using your remote control.
製品の特徴
- 3-in-1 functionality: Control up to three different IR devices.
- 126 programmable keys for comprehensive learning.
- Digital circulation learning technology for efficient programming.
- Permanent memory retention: Settings are saved even when batteries are removed.
- Compatible with various IR-controlled home appliances (TV, VCR, CBL, DVD, VCD, CD, SAT, HI-FI).
- 耐久性のある ABS プラスチックで作られています。
- CE & ROHS certified.
パッケージ内容
- 1 x XENOCAM L336 Universal IR Learning Remote Control
- ユーザーマニュアル (本書) x 1
設定
バッテリーの取り付け
The L336 remote control requires 2 AAA batteries (not included).
- リモコンの背面にある電池ボックスのカバーを開きます。
- 正しい極性 (+/-) を確認して、単 4 電池 2 本を挿入します。
- 電池ボックスのカバーを閉じます。
注記： If the remote cannot learn or the signal light flashes erratically, replace the batteries with new ones.
Learning Function (Programming the Remote)
The L336 remote learns functions directly from your original IR remote controls. Ensure your original remote is functional and uses infrared signals.
- 学習モードに入る: Press and hold the desired equipment key (e.g., TV, ビデオデッキ, 土曜) on the L336 remote until the indicator light illuminates steadily. Then release the key.
- リモートの位置: Place the L336 remote and your original remote control head-to-head, approximately 1 inch apart.
- 学習を開始する: On your original remote, press the key you wish to program (e.g., Power, Volume Up). The indicator light on the L336 remote will flash quickly, indicating it has received the signal.
- 機能の割り当て: Immediately press the corresponding key on the L336 remote where you want to store this function. The indicator light on the L336 will turn solid, confirming the function has been learned.
- Repeat for More Keys: Repeat steps 3 and 4 for all other keys you wish to learn for that device.
- 学習モードを終了: Press the same equipment key (e.g., TV) again to exit learning mode. The indicator light will turn off.
重要： The L336 can only learn from functional IR original remotes. It does not support RF (Radio Frequency) remotes.
Image: The XENOCAM L336 Universal IR Learning Remote Control. This image illustrates the remote's design, including its array of buttons and the IR emitter at the top, which should be aligned with the original remote during the learning process.
リモコンの操作
After successfully programming the L336 remote, you can use it to control your devices.
- Select the desired device by pressing the corresponding equipment key (e.g., TV, ビデオデッキ, 土曜). The indicator light may briefly illuminate to confirm selection.
- Point the L336 remote towards your device and press the programmed function keys (e.g., Power, Channel Up/Down, Volume Up/Down).
メンテナンス
- クリーニング： リモコンは柔らかく乾いた布で拭いてください。液体クリーナーや研磨剤は使用しないでください。
- バッテリー交換: Replace batteries when the remote's indicator light becomes dim or unresponsive. Always replace both batteries at the same time.
- ストレージ： リモコンは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| リモコンが応答しません。 | 電池が切れているか、正しく挿入されていない。 | 電池の極性を確認し、新しい AAA 電池と交換してください。 |
| Learning fails (indicator light flashes quickly but doesn't turn solid). | Original remote is not IR, original remote is not working, or remotes are too far apart/misaligned. | Ensure original remote is IR and functional. Position remotes head-to-head, 1 inch apart. Try again. |
| Learned function does not work correctly. | Learning error or signal interference. | Repeat the learning process for that specific key. Ensure no obstructions during learning. |
| Remote loses programmed functions after battery change. | This remote features permanent memory retention. If this occurs, it indicates a fault. | カスタマーサポートにお問い合わせください。 |
仕様
- モデル： L336
- 材料： ABSプラスチック
- 学習キー: 126
- サポートされているデバイス: Up to 3 (TV, VCR, CBL, DVD, VCD, CD, SAT, HI-FI, etc.)
- Learning Technology: Digital Circulation IR Learning
- メモリ： Permanent retention
- 力： 2 x AAA電池（別売）
- 寸法: 約8.86×1.18×1.14インチ
- 重さ： 約2.39オンス
- 認定: CE、ROHS
保証とサポート
This product is designed for reliability and performance. For any questions, technical assistance, or warranty inquiries, please contact XENOCAM customer support.
具体的な保証条件および連絡先情報については、購入書類を参照してください。