1.製品オーバーview
The TFA Dostmann digital thermo-hygrometer set is an ideal measuring instrument for monitoring indoor climate conditions. This set allows you to easily track ambient temperature and air humidity, enabling targeted adjustments through heating and ventilation. Maintaining optimal indoor climate contributes to comfort, health, and can help reduce heating costs. The compact and simple design of each thermo-hygrometer integrates seamlessly into any room.
Image 1.1: The TFA Dostmann Digital Thermo-Hygrometer Set, showing three units with their displays.
主な特徴:
- Ideal for monitoring ambient temperature and humidity.
- Features a flexible magnetic stand for versatile placement (hanging or standing).
- Provides a permanent digital display of indoor temperature and humidity.
- Includes adhesive film for secure mounting on various surfaces.
- This package contains three individual thermo-hygrometer units.
2. セットアップ手順
2.1 バッテリーの取り付け
Each thermo-hygrometer requires one 1.5V AAA battery (not included). Follow these steps to install the battery:
- デバイスの背面にある電池ボックスのカバーを見つけます。
- Gently slide or pry open the battery compartment cover.
- Insert one 1.5V AAA battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
- 電池カバーをしっかりと閉じてください。
Image 2.1: Diagram illustrating battery installation into the device.
2.2 デバイスの配置
The thermo-hygrometer offers flexible placement options:
- 立ち位置: Use the integrated magnetic stand to place the device on any flat surface, such as a table, shelf, or desk.
- 磁気取り付け: The magnetic stand allows the device to be attached to metallic surfaces like refrigerators or magnetic boards.
- 接着剤による取り付け: For non-metallic surfaces, use the provided adhesive film to secure the magnetic stand to a wall or other desired location.
For accurate readings, place the device away from direct sunlight, heat sources, and drafts.
画像2.2: 側面 view of the hygrometer demonstrating its stand for tabletop placement.
図2.3: 例ample of the hygrometer placed on a table in a living room.
3. 操作手順
Once the battery is installed, the device will automatically power on and begin displaying the current indoor temperature and humidity. There are no additional buttons or settings to adjust for basic operation.
3.1 表示情報
The clear digital display shows two primary measurements:
- 温度： Displayed in degrees Celsius (°C) at the top of the screen.
- 湿度: パーセントで表示されますtage (%) at the bottom of the screen.
Image 3.1: Close-up of the digital display showing temperature and humidity readings.
The readings update regularly to provide current environmental conditions.
4. メンテナンス
4.1 クリーニング
To maintain the device's accuracy and appearance:
- 柔らかく乾いた布でデバイスを拭いてください。
- Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the display or casing.
- Avoid exposing the device to excessive moisture or submerging it in water.
4.2 電池の交換
When the display becomes dim or stops functioning, it is time to replace the battery. Follow the battery installation steps outlined in Section 2.1. Always dispose of used batteries responsibly according to local regulations.
5。 トラブルシューティング
If you encounter issues with your thermo-hygrometer, please refer to the following common problems and solutions:
- ディスプレイが空白または暗い場合:
解決： Check if the battery is correctly installed with the correct polarity. Replace the AAA battery with a fresh one. - 不正確な読み取り:
解決： Ensure the device is placed in a stable environment, away from direct sunlight, heat sources (e.g., radiators), or strong drafts (e.g., open windows, air conditioning vents). Allow the device to stabilize for at least 30 minutes after placement or battery change. - デバイスが応答しません:
解決： Remove the battery, wait for a few seconds, and then reinsert it. If the issue persists after trying a new battery, contact customer support.
6. 技術仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | 95.2019.54 |
| 温度測定範囲 | -10 ～ +50 °C (14 ～ 122 °F) |
| 湿度測定範囲 | 10～99% |
| 電源 | 1 x 1.5V単四電池（含まれていません） |
| 製品寸法（長さ x 幅 x 高さ） | 6.1 x 2.4 x 6.1 cm（2.4 x 0.94 x 2.4インチ） |
| アイテム重量 | 44グラム（1.55オンス） |
| 材料 | プラスチック |
| 取り付けタイプ | Adhesive, Magnetic, Standing |
| 色 | ブラック/シルバー |
| 原産国 | 中国 |
7. 保証とサポート
TFA Dostmann provides quality meteorological and measurement technology. Spare parts availability for this product is typically 1 year from the date of purchase.
For further assistance, technical support, or warranty claims, please contact your retailer or the manufacturer directly. You can find more information about TFA Dostmann and their products on their official webサイト： www.tfa-dostmann.de.
Image 7.1: TFA Dostmann Company Logo.