DEWALT D36000S

DEWALT D36000S 10-Inch Wet Tile Saw with Stand User Manual

Model: D36000S | Brand: DEWALT

導入

This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.

The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.

安全情報

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool.

電気安全

  • Ensure the power cord is compatible with the power source and is properly grounded.
  • パイプ、ラジエーター、レンジ、冷蔵庫などの接地面との身体接触を避けてください。
  • 電動工具を雨や湿気の多い場所に放置しないでください。電動工具に水が入ると感電の危険性が高まります。
  • コードを乱暴に扱わないでください。コードを使って電動工具を持ち運んだり、引っ張ったり、プラグを抜いたりしないでください。コードを熱、油、鋭利な角、可動部品から遠ざけてください。

個人の安全

  • 常に目の保護具（安全メガネまたはゴーグル）と聴覚保護具を着用してください。
  • Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
  • 電動工具を操作するときは、常に注意し、作業に注意し、常識を働かせてください。
  • 手を伸ばしすぎないでください。常に適切な足場とバランスを保ってください。

Saw Specific Safety

  • Always ensure the blade guard is in place and functioning correctly.
  • Use only blades recommended for wet cutting of tile and masonry.
  • Never attempt to cut material freehand. Always use the rip fence or miter guide.
  • Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
  • Disconnect power before changing blades or performing any maintenance.

コンポーネント

The DEWALT D36000S Wet Tile Saw includes the following components:

  • D36000 Wet Tile Saw Unit
  • D24001 Stand
  • DW4764 Porcelain Tile Blade
  • 水中ウォーターポンプ
  • ウォーターパン
  • Side Water Trays
  • Rear Water Trays
  • Cutting Cart Side Extension
  • Angle/Rip Guide
  • ブレードレンチ
  • 六角レンチ

設定

安全で正確な操作には適切なセットアップが不可欠です。

1.スタンドを組み立てる

Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.

2. Mount the Saw to the Stand

Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.

DEWALT D36000S Wet Tile Saw with Stand assembled

Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.

3. Install Water Trays and Pump

Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.

トップダウン view of DEWALT D36000S showing water trays

図2: トップダウン view of the saw, illustrating the placement of the water trays for effective water management.

4. Install Blade

Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.

5. Fill Water Reservoir

Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.

ビデオ1: オーバーview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.

操作手順

Familiarize yourself with the saw's controls and cutting capabilities before beginning work.

1. Adjusting for Cuts

  • リップカット: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
  • Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
  • マイターカット: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Close-up of the miter adjustment lever on the DEWALT D36000S

Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.

2. Performing a Cut

  • Place the tile firmly against the rip fence or miter guide on the cutting cart.
  • Ensure the water pump is running and water is flowing to the blade.
  • のこぎりの電源を入れます。切断を始める前に、刃が最高速度に達するまで待ちます。
  • Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
  • Maintain a firm grip on the tile throughout the cutting process.
  • Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Close-up of the cutting cart lock mechanism on the DEWALT D36000S

Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.

メンテナンス

Regular maintenance ensures the longevity and performance of your tile saw.

1. 清掃

  • After each use, disconnect the saw from power.
  • Drain the water pan using the easy-to-remove plug.
  • Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
  • Clean the submersible pump to prevent clogging.
  • Wipe down all surfaces to prevent rust and buildup.

2. 刃のお手入れ

  • Inspect the blade for wear, damage, or dullness before each use.
  • Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
  • 損傷を防ぐために刃を適切に保管してください。

3. 一般検査

  • すべての留め具の締め具合を定期的に確認してください。
  • 電源コードに損傷の兆候がないかどうかを検査します。
  • Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
下側 view of DEWALT D36000S showing accessory storage

Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.

トラブルシューティング

このセクションでは、発生する可能性のある一般的な問題について説明します。

問題考えられる原因解決
のこぎりが起動しない電源なし、スイッチ故障、回路ブレーカー落ち電源接続を確認し、コンセントをテストし、ブレーカーをリセットし、スイッチに障害がある場合はサービスに連絡してください。
Blade not cutting efficiently or chipping tilesDull or incorrect blade, insufficient water flow, feeding too fastReplace blade, ensure pump is working and water is flowing, reduce feed rate.
Water not flowing to bladeClogged pump, kinked hose, low water levelClean pump, check hose for obstructions, refill water pan.
不正確なカットLoose fence/guide, worn blade, unstable setupTighten fence/guide, replace blade, ensure saw and stand are stable.

仕様

Key technical specifications for the DEWALT D36000S Wet Tile Saw:

  • モデル番号: D36000S
  • 電源: コード式電気
  • モーター： 15 Amp, 1220 MWO
  • 巻tage: 120V
  • ワットtage: 1800ワット
  • スピード： 4200 回転
  • ブレード直径: 10インチ
  • Rip Cut Capacity: 37 inches (41 inches with plunge)
  • クロスカット容量: 8-1/2インチ
  • 正確さ： 1/32 inch over 30 inches
  • 商品の重量: 91 ポンド
  • 商品の寸法 (長さ x 幅 x 高さ): 長さ36インチ x 幅31インチ x 高さ28.75インチ
  • ブレード材質: Stainless Steel (for included blade)
  • 表面の推奨事項: 磁器
  • 特別な機能: Brake, Integrated storage, Water tray system
  • 認証： UL

保証とサポート

保証情報、サービス、または技術サポートについては、DEWALTの公式ウェブサイトをご覧ください。 web当サイトをご覧いただくか、DEWALTカスタマーサービスまで直接お問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.