1.製品オーバーview
The Bunn 44400.0100 Sure Immersion Model 220 is a commercial-grade bean-to-cup coffee brewer designed for high-volume environments. It features two independent 3 lb hoppers with precision burr grinders, air infusion extraction control for optimal flavor, and a user-friendly 10-inch color touchscreen interface. This brewer offers five customizable portion sizes and a dedicated hot water button for versatility.
画像1.1：正面 view of the Bunn 44400.0100 Sure Immersion Model 220 Bean to Cup Coffee Brewer. The image displays the sleek stainless steel and black design, highlighting the large touchscreen display and the two bean hoppers at the top.
2. セットアップ手順
2.1 開梱
Carefully remove the brewer from its packaging. Inspect for any shipping damage. Retain all packaging materials for future transport or service needs.
2.2 配置
Place the brewer on a stable, level surface capable of supporting its weight. Ensure adequate clearance around the unit for ventilation and access. The brewer requires a dedicated 120V, 60Hz, 1-phase electrical supply with a 15 Amp circuit, utilizing a NEMA 5-15P plug. Ensure the electrical outlet is properly grounded.
2.3 初期洗浄
Before first use, wipe down all exterior surfaces with a damp cloth. Clean the bean hoppers and drip tray with mild soap and water, then rinse thoroughly and dry completely. 注記： この器具は食器洗い機では洗えません。
2.4 Hopper Installation and Water Connection
- Ensure the two 3 lb bean hoppers are clean and dry. Place them securely into their designated slots on top of the brewer.
- Connect the brewer to a potable cold water supply using appropriate plumbing connections. It is recommended to use a water filter to prevent mineral buildup. Refer to local plumbing codes for installation requirements.
3. Operating the Brewer
3.1 Powering On and Initial Start-up
Plug the brewer into the dedicated electrical outlet. The 10-inch color touchscreen will illuminate. Follow any on-screen prompts for initial setup, such as language selection or date/time settings.
3.2 コーヒー豆の装填
Open the lids of the two 3 lb hoppers. Pour fresh, whole coffee beans into each hopper. The brewer features independent grinders, allowing for different bean types in each hopper if desired.
3.3 コーヒーの淹れ方
- Place a suitable coffee cup or carafe under the dispense spout.
- On the 10-inch color touchscreen, select your desired coffee type (if configured) and portion size from the five available options.
- Press the "Brew" button on the touchscreen. The brewer will automatically grind the beans, initiate the air infusion extraction process, and dispense the coffee.
- Wait for the brewing cycle to complete before removing the cup or carafe.
3.4 お湯を出す
To dispense hot water, place a cup under the hot water spout and press the dedicated "Hot Water" button on the touchscreen. Press the button again to stop the flow.
4. メンテナンスと清掃
Regular maintenance ensures optimal performance and longevity of your Bunn Sure Immersion Model 220 brewer. Always unplug the brewer before performing any cleaning or maintenance.
4.1毎日の清掃
- Wipe down the exterior surfaces, including the touchscreen, with a soft, damp 布。
- ドリップトレイを空にして清掃します。
- Remove and clean the dispense spout assembly.
4.2毎週の清掃
- Clean the bean hoppers thoroughly, ensuring no residual coffee oils or grounds remain.
- Clean the grinding chambers. Refer to the on-screen menu for specific grinder cleaning cycles or instructions.
4.3スケール除去
Depending on water hardness, descaling may be required periodically to remove mineral buildup. The brewer's touchscreen may indicate when descaling is necessary. Use a commercial descaling solution specifically designed for coffee brewers and follow the manufacturer's instructions carefully. Do not use vinegar as it may damage internal components.
5。 トラブルシューティング
This section addresses common issues you might encounter with your Bunn Sure Immersion Model 220 brewer. For problems not listed here, contact Bunn customer support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ブリューワーの電源が入りません。 | 電源が供給されず、回路ブレーカーが落ちました。 | Ensure the power cord is securely plugged in. Check the circuit breaker and reset if necessary. |
| コーヒーは出ません。 | No water supply; empty bean hoppers; clogged grinder/spout. | Verify water supply is connected and turned on. Refill bean hoppers. Clean the grinder and dispense spout. |
| コーヒーの味が薄く、水っぽい。 | Incorrect grind setting; insufficient coffee beans; descaling needed. | Adjust grind setting via touchscreen. Ensure hoppers have sufficient beans. Perform descaling if prompted or overdue. |
| タッチスクリーンが反応しない。 | 一時的なソフトウェアの不具合。 | Unplug the brewer for 30 seconds, then plug it back in to perform a soft reset. |
6. 技術仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | バン |
| モデル番号 | 44400.0100 |
| 色 | ステンレス/ブラック |
| 特集 | Integrated Coffee Grinder, Air Infusion Extraction Control |
| コーヒーメーカーの種類 | Drip Coffee Machine (Bean-to-Cup) |
| スタイル | モダンな |
| 操作モード | 完全自動 |
| アイテム数 | 1 |
| ヒューマンインターフェイス入力 | Buttons, 10" Color Touchscreen |
| ユニット数 | 1.0 カウント |
| 国際取引識別番号 (GTIN) | 00072504124360 |
| コーヒー入力タイプ | ホールビーンズ |
| 食器洗い機対応 | いいえ |
| メーカー | バン |
| 欧州連合 | 072504124360 |
| ASIN | B084SSN4VX |
| 容量 | Two 3 lb Hoppers, 5 Portion Sizes |
| 電気要件 | 120V, 60Hz, 1-phase, 15.0 Amps, 1.8kW, NEMA 5-15P |
7. 保証と顧客サポート
7.1 保証情報
Specific warranty details for the Bunn 44400.0100 Sure Immersion Model 220 are typically provided with the product documentation at the time of purchase. Please refer to the warranty card or contact Bunn customer service for comprehensive information regarding warranty coverage, terms, and conditions.
7.2 カスタマーサポート
For technical assistance, service, or to order replacement parts, please contact Bunn customer support. Contact information can usually be found on the Bunn official website or in the documentation included with your brewer.
8. 製品ビデオ
この商品に関する公式販売者の動画は、利用可能なデータ内には存在しません。メーカーの website for any instructional videos or demonstrations.