Walfront K01-50/63 K02-50/63 Lathe Chuck Connecting Rod Instruction Manual

1. はじめに

This manual provides essential information for the safe and effective use of your Walfront K01-50/63 K02-50/63 Lathe Chuck Connecting Rod. Please read these instructions carefully before installation and operation. Keep this manual for future reference.

2.製品オーバーview

The Walfront Lathe Chuck Connecting Rod is designed for high precision and durability, making it an ideal accessory for mini lathe chucks. It features a robust construction from heat-treated stainless steel, ensuring high hardness and stable performance during various machining operations.

主な特徴:

• 優れた耐久性: Forged from high-quality heat-treated stainless steel for superior hardness and long service life.
• 正確な寸法: Specifically designed as an M14*1 chuck connecting rod for K01-50/63 and K02-50/63 lathe chuck models.
• 多用途アプリケーション: Optimally suited for use with mini lathe chucks.
• 安定したパフォーマンス: Engineered for stability, providing consistent and reliable performance during operation.
• 高精度: A high-precision connecting rod offering excellent compatibility with mini lathe machine parts.

図2.1：以上view of the connecting rod's features and compatibility.

図2.2：詳細 view of the drill chuck adapter and its dimensions.

3. 仕様

4. 安全情報

Always prioritize safety when working with power tools and machinery. Failure to follow safety guidelines can result in serious injury or damage to equipment.

• 安全メガネ、手袋、聴覚保護具などの適切な個人用保護具 (PPE) を着用してください。
• Ensure the lathe and chuck are securely mounted and stable before attaching the connecting rod.
• Always disconnect power to the lathe before making any adjustments or changing accessories.
• Verify that the connecting rod is correctly and securely fastened to both the chuck and the drill/motor shaft.
• Do not exceed the maximum rotational speed recommended for your lathe chuck and drill.
• 回転部分に手やゆったりした衣服を近づけないでください。
• Inspect the connecting rod for any signs of wear, damage, or deformation before each use. Do not use if damaged.

5. セットアップ

Follow these steps to properly set up the connecting rod with your lathe chuck and drill/motor:

1. Prepare the Lathe Chuck: Ensure your K01-50/63 or K02-50/63 lathe chuck is clean and free from debris.
2. Attach to Chuck: Carefully thread the M14*1 end of the connecting rod into the corresponding thread on your lathe chuck. Tighten securely using an appropriate wrench, ensuring there is no play.
3. Prepare the Drill/Motor: Insert the 10mm shank end of the connecting rod into the chuck of your electric drill or motor. Ensure the shank is fully seated and centered.
4. Secure the Drill Chuck: Tighten the drill chuck securely around the 10mm shank. Verify that the connecting rod is held firmly and does not wobble.
5. 最終チェック: Manually rotate the assembly to confirm smooth movement and proper alignment before powering on the equipment.

Figure 5.1: Connecting rod installed on a lathe chuck.

Figure 5.2: Illustration of the connecting rod's dimensions and typical usage.

6. 操作手順

Once the connecting rod is securely installed, you can proceed with your machining tasks. Always operate the equipment within its intended parameters.

• Start the drill/motor at a low speed and gradually increase to the desired operating speed.
• Monitor for any unusual vibrations, noises, or excessive heat during operation. If detected, immediately stop the machine and inspect the setup.
• Ensure the workpiece is properly secured in the lathe chuck before beginning any cutting or shaping operations.
• Avoid applying excessive force that could strain the connecting rod or the chuck.
• When finished, gradually reduce the speed and turn off the drill/motor. Allow all rotating parts to come to a complete stop before touching the assembly.

7. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your connecting rod.

• クリーニング： After each use, clean the connecting rod to remove any metal shavings, dust, or lubricants. Use a clean cloth and a mild cleaning agent if necessary.
• 検査： Periodically inspect the threads (M14*1) and the shank (10mm) for wear, damage, or corrosion. Check for any cracks or deformities in the stainless steel body.
• 潤滑: Apply a thin layer of machine oil to the threads and shank if storing for extended periods to prevent rust.
• ストレージ： Store the connecting rod in a dry, clean environment, protected from moisture and impact.

8。 トラブルシューティング

If you encounter issues during the use of your connecting rod, refer to the following common problems and solutions:

9. 保証とサポート

For any questions, concerns, or support regarding your Walfront K01-50/63 K02-50/63 Lathe Chuck Connecting Rod, please contact Walfront customer service. Refer to your purchase documentation for specific warranty terms and contact information.