ヴィーハ 28781
Wiha 28781 絶縁トルクバリオSおよびスリムラインブレードセット 取扱説明書
Model: 28781 | Brand: Wiha
導入
This manual provides essential information for the safe and effective use of your Wiha 28781 20-Piece Insulated TorqueVario-S and SlimLine Blade Set. Please read these instructions carefully before operation and retain for future reference.
主な特徴:
- Comprehensive set including Slotted, Phillips, Square, Torx, and Xeno Slotted/Phillips blades.
- Individually tested to 10,000 volts AC and rated to 1,000 volts AC for enhanced safety.
- Adjustable TorqueVario-S handle with clear setting view ポート。
- Audible and perceptible click mechanism for precise torque application.
- Individual Serial Numbers and Certificate of Calibration Accuracy for quality assurance.
製品終了view
Figure 1: The complete Wiha 28781 set displayed in its protective roll-up pouch, showcasing the TorqueVario-S handle and various SlimLine blades.
図2: 詳細な view of the SlimLine insulated blades, highlighting their narrow diameter for access in confined spaces.
Figure 3: Close-up of the TorqueVario-S handle, showing the adjustable torque setting mechanism (10-50 In/lbs) and clear viewingウィンドウ。
設定
- セットを開梱します: Carefully remove all components from the roll-up pouch.
- コンポーネントの検査: Before first use, inspect the TorqueVario-S handle and all SlimLine blades for any signs of damage or wear. Do not use damaged tools.
- 適切なブレードを選択してください: Choose the appropriate SlimLine blade for the fastener type and size.
- Insert Blade into Handle: Insert the selected SlimLine blade into the TorqueVario-S handle. Ensure it clicks securely into place.
- Set Torque Value: Adjust the torque setting on the TorqueVario-S handle to the required value (10-50 In/lbs) using the view port. Refer to the specific application's torque requirements.
操作手順
- 安全第一: Always ensure the power is off and verified before working on electrical components. The insulation provides protection against accidental contact with live parts, but it is not a substitute for proper lockout/tag手順を説明します。
- トルクを適用する: Place the blade tip firmly into the fastener head. Turn the handle clockwise for tightening or counter-clockwise for loosening.
- クリック音: Continue turning until an audible and perceptible click is felt and heard. This indicates that the preset torque limit has been reached. Stop applying force immediately after the click.
- ブレードの取り外し: To remove a SlimLine blade, pull back the collar on the TorqueVario-S handle and extract the blade.
Video 1: This video demonstrates the proper use of the Wiha TorqueVario-S for achieving precise torque, highlighting its features and benefits for professional applications.
メンテナンス
- クリーニング： Clean the tools regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents that could damage the insulation or calibration.
- ストレージ： Store the TorqueVario-S handle and SlimLine blades in the provided roll-up pouch in a dry, clean environment to protect them from damage and corrosion.
- 較正： The TorqueVario-S handle is a precision instrument. It is recommended to have it recalibrated periodically by an authorized service center to maintain accuracy. Refer to the included Certificate of Calibration Accuracy for details.
- 検査： Regularly inspect the insulation on the blades and handle for cracks, cuts, or other damage. Discontinue use immediately if any damage is observed and replace the affected component.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Torque click not felt/heard. | Incorrect torque setting, tool not properly engaged. | Verify torque setting. Ensure blade is fully seated in fastener. Apply steady, even pressure. |
| Blade slips from fastener. | Incorrect blade size/type, worn blade tip, improper technique. | Use correct blade for fastener. Replace worn blades. Apply firm, axial pressure while turning. |
| Blade does not securely fit in handle. | Debris in handle, damaged blade base or handle mechanism. | Clean handle receptacle. Inspect blade base for damage. If problem persists, contact support. |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 28781 |
| セット内容 | 20-Piece: TorqueVario-S Handle, SlimLine Blades (Slotted 2.5, 3.5, 4.0, 6.5mm; Phillips #1, #2 (QTY 2 of #2); Square #1, #2; Torx T10, T15, T20, T25; Xeno Slotted/Phillips #1, #2) |
| トルク範囲 | 10-50 In/lbs |
| 断熱材の評価 | 1,000 Volts AC (Individually tested to 10,000 Volts AC) |
| 材料 | Molybdenum-Vanadium Tool Steel (Blades), Blend (Handle) |
| メーカー | Willi Hahn Corporation |
| 起源 | ドイツ製 |
安全情報
警告： Always wear appropriate personal protective equipment (PPE) when working with tools, especially around electrical systems. These insulated tools are designed to reduce the risk of electrical shock, but they do not eliminate it. Always de-energize circuits and verify with a voltage tester before beginning work.
- Do not use tools if insulation is damaged.
- Do not expose tools to excessive heat or chemicals.
- Use only for intended applications within the rated voltage.
保証とサポート
The Wiha 28781 set comes with a Certificate of Calibration Accuracy, ensuring its precision and reliability. Wiha tools are known for their quality and durability. For specific warranty details or technical support, please refer to the official Wiha webサイトをご覧いただくか、正規販売店にお問い合わせください。