ムーアス MT-C2

mooas Multi Cube Timer (Model MT-C2) Instruction Manual

Your guide to effective time management and productivity.

1. はじめに

The mooas Multi Cube Timer is a versatile device designed to assist with time management, functioning as both a digital clock and a preset timer. Its intuitive rotating design allows for quick selection of common time intervals, making it ideal for various activities such as cooking, studying, exercising, or managing short breaks.

2. 安全情報

  • 損傷を防ぐため、デバイスを水や高湿度から遠ざけてください。
  • デバイスを落としたり、強い衝撃を与えたりしないでください。
  • ご自身でデバイスの分解や修理を試みないでください。問題が発生した場合は、カスタマーサポートにお問い合わせください。
  • 電池が極性マークに従って正しく挿入されていることを確認してください。
  • 長期間使用しない場合は、液漏れを防ぐため電池を取り外してください。

3. パッケージ内容

  • mooas Multi Cube Timer (Violet, Model MT-C2)
  • 取扱説明書

注意: 単4電池2本が必要ですが、パッケージには含まれていません。

4.製品オーバーview

The mooas Multi Cube Timer features a compact, cube-shaped design with an LCD display on one side and preset time intervals (5, 10, 20, 30 minutes) on its other four sides. The back panel contains control buttons for mode selection and time setting.

mooas Multi Cube Timer in Violet

Image: The mooas Multi Cube Timer in Violet, showcasin洗練されたデザイン。

Dimensions of mooas Multi Cube Timer

Image: Diagram illustrating the dimensions of the cube timer: 2.36"D x 2.36"W x 2.17"H.

Back panel of mooas Multi Cube Timer with control buttons

Image: The back panel of the timer, showing the Timer/Clock mode switch, SET button, and arrow button for adjustments.

5. セットアップ

5.1 バッテリーの取り付け

  1. タイマーの背面にある電池ボックスを見つけます。
  2. 電池ボックスのカバーを開きます。
  3. 電池ボックス内の指示に従って、極性 (+/-) が正しいことを確認して、単 4 電池 2 本を挿入します。
  4. 電池カバーをしっかりと閉じてください。
Battery compartment and control buttons on the back of the timer

Image: The back of the timer showing the battery compartment and control buttons for setting the clock and switching modes.

6. 操作手順

6.1 Switching Between Clock and Timer Mode

On the back of the timer, locate the switch labeled "TIMER" and "CLOCK".

  • To use as a timer, slide the switch to "TIMER".
  • To use as a clock, slide the switch to "CLOCK".

6.2時計の設定

Ensure the timer is in "CLOCK" mode.

  1. Press and hold the "SET" button until the hour display starts blinking.
  2. Use the "UP" arrow button to adjust the hour.
  3. Press "SET" again to move to minute setting. Use the "UP" arrow button to adjust the minutes.
  4. Press "SET" a third time to switch between 12/24 hour format. Use the "UP" arrow button to select.
  5. Press "SET" one last time to confirm and exit setting mode.

6.3 タイマーの使用

Ensure the timer is in "TIMER" mode.

  1. To Start a Timer: Simply flip the cube so that the desired preset time (5, 10, 20, or 30 minutes) faces upwards. The timer will start automatically with a beep, and the countdown will be displayed.
  2. To Pause the Timer: Turn the timer so that the LCD display faces upwards. The countdown will pause.
  3. To Resume the Timer: Turn the timer so that the side with the time number faces upwards again. The countdown will resume from where it left off.
  4. タイマーをリセットするには: To reset the current countdown and start fresh with the selected time, turn the timer so the LCD screen faces downwards. Then, flip it back to the desired time face up.
Different preset time configurations on the cube timer

Image: The mooas Multi Cube Timer showing its various preset time options (5, 10, 20, 30 minutes) on different faces.

mooas Multi Cube Timer displaying time in clock mode

Image: The timer displaying the current time in clock mode, indicating its dual functionality.

Hand demonstrating how to flip the timer to start a countdown

Image: A hand flipping the cube timer to activate a preset countdown, illustrating the simple operation.

6.4 LEDインジケータ

An LED indicator on each side of the cube blinks every second to visually show how much time has passed, even without looking directly at the display.

6.5 Timer Alarm & Backlight

When the timer reaches zero:

  • バックライトが10秒間点灯します。
  • An alarm will sound for 1 minute.

Video: Official product video demonstrating the mooas Multi Cube Timer's features, including its rotating functionality, clock mode, and timer settings. The video shows how to activate and pause the timer by simply flipping the cube.

7. 特徴

  • Pre-set Time: 5、10、20、30分。
  • 時計とタイマー: Multi-functional device for convenience and effective time management.
  • LEDインジケーター: Blinks each second to show elapsed time without needing to see the display.
  • 使いやすい: Simple flip-and-turn operation to start, pause, and resume timers.
  • Timer Alarm & Backlight: Clear audio alarm and illuminated display when time is up.
  • シンプルなデザイン: Compact cube design, suitable for various environments.

8. メンテナンス

  • 柔らかく乾いた布でデバイスを拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
  • 使用しないときは涼しく乾燥した場所に保管してください。
  • デバイスを極端な温度にさらさないでください。

9。 トラブルシューティング

  • デバイスの電源が入らない: 電池が正しく挿入され、消耗していないことを確認してください。必要に応じて新しい単4電池に交換してください。
  • タイマーが開始しません: Ensure the mode switch on the back is set to "TIMER" and the desired time face is clearly facing upwards.
  • 表示の問題: Low battery power can affect display clarity. Replace batteries.
  • アラームが鳴らない: Check if the device is in a quiet environment or if the sound is too low. Ensure no obstructions are covering the speaker.

10. 仕様

モデル番号MT-C2
バイオレット
材料プラスチック
製品寸法奥行き2.36インチ x 幅2.36インチ x 高さ2.17インチ
アイテム重量2.43オンス(69グラム)
Pre-set Time Settings5、10、20、30分
電源単2電池XNUMX本(別売)

11. 保証とサポート

For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly. Keep your purchase receipt as proof of purchase.

© 2024 mooas. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.