導入
This manual provides detailed instructions for the Transformers Studio Series 66 Leader Class Constructicon Overload action figure. This figure is inspired by the iconic movie scenes from Transformers: Revenge of the Fallen and is designed with specific details to reflect the Transformers movie universe. Constructicon Overload is an 8.5-inch collectible figure that converts between robot and articulated dump truck modes.
The figure is also a component of the larger Constructicon Devastator assembly. Please read all instructions carefully before handling the product.
安全情報
警告：窒息の危険 - 小さな部品が飛び散る場合があります。3歳未満のお子様には与えないでください。
この製品の推奨年齢は8歳以上です。
箱の中身
パッケージには以下のアイテムが含まれている必要があります:
- 1x Constructicon Overload Action Figure
- 1x Detailed Accessory
- 1x Removable Backdrop (for display)
- 説明書1枚（この文書）
セットアップと変換
The Constructicon Overload figure can convert between two primary modes: Robot Mode and Articulated Dump Truck Mode. The transformation process involves 34 steps. Refer to the visual guides and video below for assistance.
ロボットモード
In Robot Mode, Constructicon Overload stands at 8.5 inches tall. This mode features high articulation, allowing for various poses. The included accessory can be attached to the figure in this mode.
Articulated Dump Truck Mode
To convert the figure into its Articulated Dump Truck Mode, carefully follow the 34-step transformation sequence. Ensure all panels and joints are securely tabbed into place to form a cohesive vehicle. This mode is designed to resemble the character's appearance as a dump truck.
変身ビデオガイド
Official video demonstrating the transformation of the Transformers Studio Series Leader Overload figure between robot and vehicle modes.
For a visual walkthrough of the transformation, please refer to the embedded video. Pay close attention to the sequence and ensure all parts are aligned correctly to prevent damage.
操作手順
Posing the Figure
The Constructicon Overload figure features multiple points of articulation. Carefully manipulate the joints to achieve desired poses. Avoid excessive force, as this may damage the figure.
Combining with Devastator
Constructicon Overload is designed to combine with other Constructicon figures from the Studio Series to form the larger Constructicon Devastator. This figure typically forms the abdomen section of Devastator. Refer to the individual instruction manuals of the other Constructicon figures for their specific transformation and combination steps. Ensure all connection points are secure when combining figures.
The removable backdrop included with the figure can be used to display Constructicon Overload in the Pyramid Desert Battle scene, enhancing your display options.
メンテナンス
- クリーニング： フィギュアの埃は、柔らかく乾いた布で優しく拭き取ってください。塗装やプラスチックを傷める可能性があるため、刺激の強い化学薬品や研磨剤の使用は避けてください。
- ストレージ： Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or warping.
- 取り扱い： Always handle the figure by its main body parts. Avoid pulling or twisting small, delicate components with excessive force.
トラブルシューティング
- 変身難易度: If you encounter resistance during transformation, do not force the parts. Re-examine the instruction steps and the transformation video to ensure correct alignment. Sometimes, a specific panel needs to be moved or rotated before another can articulate.
- 緩いジョイント: Over time, some joints may become slightly loose. This is common with articulated figures. For minor looseness, a small amount of clear nail polish or a specialized joint tightener can be applied to the joint and allowed to dry, but proceed with caution.
- Parts Not Tabbing: Ensure all tabs and slots are correctly aligned. Sometimes, a slight adjustment to an adjacent part is needed for a tab to fully engage.
仕様
- 製品寸法: 4.02 x 9.25 x 10.98インチ
- 商品の重量: 1.15ポンド
- モデル番号: E7217
- メーカー推奨年齢: 8歳以上
- 発売日： 28年2020月XNUMX日
- メーカー: ハズブロ
保証とサポート
For information regarding product warranty or technical support, please refer to the official Hasbro web購入サイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。購入証明書としてレシートを保管してください。
Official Transformers Webサイト： Visit the Transformers Store