ナーフ E9952
Nerf Elite 2.0 Volt SD-1 ブラスター 取扱説明書
モデル: E9952
製品終了view
The Nerf Elite 2.0 Volt SD-1 Blaster is designed for enhanced targeting and customizable play. This compact blaster comes with 6 Official Nerf darts and features a light beam for improved accuracy in low-light conditions. It also includes 2 tactical rails for attaching accessories (sold separately) and built-in storage for 2 darts, ensuring quick reloads during play.

Image: Nerf Elite 2.0 Volt SD-1 Blaster in its retail packaging, showcasing the blaster, darts, and key features.
コンポーネント
Your Nerf Elite 2.0 Volt SD-1 Blaster package includes:
- 1 x Nerf Elite 2.0 Volt SD-1 Blaster
- 公式ナーフダーツ6本
- 取扱説明書

Image: The Nerf Elite 2.0 Volt SD-1 Blaster displayed alongside its 6 included Official Nerf Darts.
設定
Battery Installation (for Light Beam)
The light beam targeting feature requires 2 AAA batteries (not included). To install:
- ブラスターの電池収納部を見つけます。
- プラスドライバー(付属していません)を使用して、電池ボックスのカバーを外します。
- 正しい極性 (+/-) を確認して、単 4 電池 2 本を挿入します。
- カバーを取り付けてネジで固定します。
ダーツの装填
To load a dart into the blaster:
- Insert one Official Nerf dart into the barrel at the front of the blaster. Push it in firmly until it is seated properly.
- For quick reloads, store up to 2 additional darts in the built-in storage slots located in the handle of the blaster.

画像: 正面 view of the Nerf Elite 2.0 Volt SD-1 Blaster, showing the barrel where darts are loaded.
操作手順
プライミングと発射
- ダーツがバレルに装填されていることを確認します。
- Pull the priming handle at the back of the blaster all the way back until it clicks into place. This primes the blaster for firing.
- ターゲットを狙ってください。
- トリガーを押すとダーツが発射されます。
光線ターゲティングの使用
To activate the light beam for enhanced targeting:
- Locate the light beam switch on the front underside of the blaster.
- Slide the switch to the 'ON' position to activate the light beam.
- The light beam will project a red dot onto your target, assisting with aim up to 15 feet (4.5 meters) away.
- 使用していないときは、スイッチを「OFF」の位置にスライドして、バッテリー寿命を節約してください。
ビデオ: 製品view demonstrating the features and operation of the Nerf Elite 2.0 Volt SD-1 Blaster.
ビデオ: 公式製品ビデオショーasing the Nerf Elite 2.0 Volt SD-1 Blaster in action, highlighting its light beam and dart storage.
メンテナンス
- クリーニング: ブラスターを広告で拭くamp 布で埃や汚れを拭き取ってください。水に浸さないでください。
- ダーツのお手入れ: Use only Official Nerf darts. Inspect darts regularly for damage. Damaged darts may affect performance and could cause jams. Do not modify darts.
- バッテリー交換: Replace batteries when the light beam becomes dim or stops working. Always use fresh, new batteries of the specified type.
- ストレージ: Store the blaster and darts in a cool, dry place away from direct sunlight when not in use.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Dart does not fire or jams | Blaster not fully primed; Damaged dart; Non-Official dart used | Pull priming handle all the way back until it clicks; Replace dart with a new, Official Nerf dart |
| Light beam is dim or not working | Low or dead batteries; Batteries incorrectly installed; Light beam switch is off | Replace batteries; Check battery polarity; Slide light beam switch to 'ON' |
仕様
- 製品寸法: 10.5 x 2.25 x 8インチ
- 商品の重量: 7.1オンス
- モデル番号: E9952
- メーカー推奨年齢: 8 - 8歳
- 必要な電池: 単2電池XNUMX本(別売)
- ダーツ射撃場: 最大90フィート(27メートル)
- 光線範囲: 最大15フィート(4.5メートル)
- メーカー: ハズブロ
安全情報
警告: 目の損傷を防ぐために:
- 目や顔を狙わないでください。
- プレイヤーおよび範囲内の人にはアイウェアの使用を推奨します。
- ナーフ公式ダーツのみを使用してください。他社製のダーツは安全基準を満たしていない場合があります。
- Do not modify blaster or darts.
サポート
For further assistance or inquiries, please contact the manufacturer directly. Refer to the product packaging for contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.