ZENY 58-inch L-Shaped Reversible Desk Instruction Manual

導入

Thank you for choosing the ZENY 58-inch L-Shaped Reversible Desk. This manual provides detailed instructions for assembly, usage, maintenance, and troubleshooting to ensure optimal performance and longevity of your desk. Please read this manual thoroughly before assembly and retain it for future reference.

安全情報

• 傷がつかないように、必ず柔らかくて清潔な表面の上でデスクを組み立ててください。
• Ensure all screws and fasteners are securely tightened before use. Periodically check and retighten as needed.
• Do not overload the desk. The maximum weight capacity is 500 pounds (226 kg).
• 窒息の危険を防ぐため、小さな部品や梱包材はお子様の手の届かない場所に保管してください。
• 組み立てた机を移動する際は、怪我や損傷を防ぐために注意してください。
• Adjustable foot pads are included to ensure stability on uneven floors. Ensure they are properly adjusted.

パッケージ内容

Before beginning assembly, verify that all components and hardware are present and undamaged. The package includes all necessary tools for assembly.

• デスクパネル（L字型セクション）
• Steel frame components (legs, support bars)
• 組み立て用ハードウェア（ネジ、ボルト、ワッシャー）
• 調節可能なフットパッド
• 組み立て工具（例：六角レンチ）

セットアップと組み立て

正しく組み立てるために、以下の手順を慎重に実行してください。組み立ては2人で行うことを推奨します。

ステップ1：開梱して部品を識別する

Carefully remove all contents from the packaging. Lay out all desk panels, frame components, and hardware on a clean, soft surface. Refer to the included parts list to identify each piece.

ステップ2: フレームを組み立てる

Attach the steel frame components according to the diagrams in your specific instruction leaflet. Ensure all connections are finger-tightened initially.

ステップ3：デスクパネルを取り付ける

Carefully place the desk panels onto the assembled frame. Align the pre-drilled holes in the panels with the holes in the frame. Secure the panels using the provided screws. Once all panels are in place, fully tighten all screws and bolts.

Step 4: Configure Reversible Setup

The desk features a reversible design, allowing you to switch the long and short sides to suit your room layout or preference. This configuration can be adjusted during assembly by orienting the L-shaped sections as desired. The image below illustrates the two-way setup options.

Image: Two-way setup options for the L-shaped desk, demonstrating how the long and short sides can be reversed.

Step 5: Install Adjustable Foot Pads

Screw the adjustable foot pads into the bottom of each leg. Adjust them as needed to level the desk and prevent wobbling on uneven surfaces. These pads also protect your floor from scratches.

Image: Details of the desk's construction, including table thickness, adjustable leg pads, and sturdy frame.

操作手順

The ZENY L-Shaped Desk is designed for versatile use in home offices, gaming setups, or study areas. Its spacious surface accommodates multiple monitors, laptops, and other office essentials.

• ワークスペースの利用率: Arrange your computer, peripherals, and documents to maximize the L-shaped layout. The corner design optimizes space utilization.
• 可逆構成: As mentioned in the setup, the desk can be configured with the longer section on either the left or right side, adapting to your specific room and workflow needs.
• 安定性： Ensure the adjustable foot pads are correctly set to maintain desk stability, especially when placing heavy equipment.

Image: The ZENY L-Shaped Desk configured as a home office workstation.

メンテナンス

適切な手入れをすると、デスクの寿命と見た目が長くなります。

• クリーニング： 机の表面を柔らかくて乾いた布で拭きます。amp 布で拭いてください。仕上げを傷める可能性のある、刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
• こぼれ： Immediately wipe up any spills to prevent staining or damage to the engineered wood desktop.
• ハードウェアチェック: Periodically inspect all screws and bolts to ensure they remain tight. Retighten if necessary to maintain structural integrity.
• 極端な状況を避ける: Do not expose the desk to extreme temperatures or humidity, as this may cause warping or damage to the materials.

トラブルシューティング

仕様

保証とサポート

For warranty information or technical support, please refer to the documentation included with your purchase or contact ZENY customer service directly. Keep your purchase receipt for warranty claims.

連絡先情報は通常、メーカーの webサイトまたは製品パッケージに記載されています。