iJDMTOY RamBox Interior LED Light Replacement Manual

製品終了view

The iJDMTOY 4pc 3X Brighter 18-SMD Full White LED RamBox Interior Light Replacement is designed to significantly enhance the illumination within your truck's RamBox storage compartments. These LED lights provide a bright, full white light, offering superior visibility compared to standard incandescent bulbs. This product is compatible with 2019-up Gen5 Dodge RAM 1500 そして 2020-up Gen5 RAM HD 2500 3500 trucks equipped with RamBox storage. Please note, this product is not compatible with RAM Classic モデル。

Four iJDMTOY 18-SMD Full White LED RamBox interior lights with product packaging.

Figure 1: iJDMTOY 4pc 18-SMD Full White LED RamBox Interior Light Replacement Kit.

機能と利点

明るさの向上: Delivers triple the brightness compared to dull yellowish incandescent bulbs and most miniature LED replacement bulbs or strips.
Even Lighting Projection: Ensures uniform illumination throughout the RamBox compartment, eliminating dark spots.
視認性の向上: Makes it significantly easier to organize your trunk area and locate tools and items, even in low-light conditions.
直接交換: Designed for a seamless fit, replacing OEM part numbers such as Mopar # 68211290AB and 68276972AA.

Comparison image showing the brighter iJDMTOY LED light on the left and a dimmer OEM light on the right.

Figure 2: Brightness comparison between iJDMTOY LED (left) and OEM light (right).

閉じる view of the iJDMTOY LED light module emitting a bright white light.

図3：詳細 view of the iJDMTOY LED light's powerful illumination.

インストールガイド

Follow these steps to safely and correctly install your new iJDMTOY RamBox LED lights. It is recommended to perform this installation in a well-lit area.

準備： Ensure your vehicle's ignition is off and the RamBox lights are not active. Gather necessary tools, such as a small flat head screwdriver or a plastic pry tool.
Remove OEM Lamp: Carefully pry out the OEM lamp cover and housing from the RamBox compartment. Use a flat head screwdriver or a pry tool, applying gentle pressure to release the clips.
電源コードを外す: Once the OEM housing is loose, unplug the existing power cord from the back of the lamp.
Connect New LED Assembly: Take the new iJDMTOY LED assembly. VERY CAREFUL! The pins inside the LED lamp are very thin. Ensure the pins are perfectly aligned with the adapter's openings before fully plugging in the adapter. If the pins are not aligned properly, use a small flat head screwdriver to gently adjust them. Improper alignment can bend or damage the contacts.
テスト機能: Before fully securing the new LED assembly, briefly turn on your vehicle's lights or open the RamBox to confirm the new LED lights illuminate correctly.
Secure New LED Assembly: Carefully push the new LED assembly into the RamBox opening until it clicks securely into place. Ensure it sits flush with the surrounding surface.
Repeat for all lights: Repeat the process for all four RamBox interior lights.

Warning sign with an exclamation mark, showing a close-up of an electrical connector with thin pins and an arrow pointing to the connection point, emphasizing careful alignment.

Figure 4: Caution regarding delicate pins during connection.

Video 1: Official iJDMTOY product demonstration and installation overview for the RamBox LED lights. This video shows the product in detail and its application.

Interior of a truck's RamBox storage compartment with the new bright LED lights installed, illuminating the contents.

Figure 5: RamBox interior with iJDMTOY LED lights installed, providing clear illumination.

別の view of the truck's RamBox interior with the bright LED lights installed, showing the enhanced visibility.

Figure 6: RamBox interior with iJDMTOY LED lights from a different angle.

Close-up of the RamBox interior showing the bright output of the installed iJDMTOY LED lights.

Figure 7: Bright illumination inside the RamBox from the installed LED lights.

操作手順

The iJDMTOY RamBox LED lights operate automatically with your vehicle's existing RamBox lighting system. They will turn on when the RamBox is opened or when the vehicle's interior lights are activated, depending on your truck's specific wiring and settings. No additional controls or manual operation are required for these replacement lights.

メンテナンス

These LED lights are designed for long-term, maintenance-free operation. However, to ensure optimal performance and longevity:

クリーニング： Periodically wipe the surface of the LED lenses with a soft, damp cloth to remove any dust or debris that may accumulate. Avoid using abrasive cleaners or solvents.
検査： Occasionally inspect the lights for any signs of damage or loose connections. If any issues are observed, refer to the Troubleshooting section.

トラブルシューティング

問題	考えられる原因	解決
ライトが点灯しない。	Incorrect connection, bent pins, or vehicle's lighting system issue.	1. Recheck the connection to ensure the pins are properly aligned and fully inserted. Refer to the インストールガイド、ステップ4。 2. Verify that the vehicle's RamBox lighting system is functioning correctly with other lights (if applicable). 3. Ensure the vehicle's ignition is on and the RamBox is open.
ライトがちらついたり暗くなったりします。	接続が緩んでいるか、電力が不足しています。	1. Securely re-seat the electrical connector. 2. Inspect the wiring for any damage.
Light housing does not fit flush.	Improper seating or obstruction.	1. Ensure all clips are properly engaged. 2. Check for any debris or obstructions preventing a flush fit.

仕様

属性	詳細
製品名	iJDMTOY 4pc 3X Brighter 18-SMD Full White LED RamBox Interior Light Replacement
モデル番号	75-148-ホワイト
互換性	2019-up Gen5 Dodge RAM 1500, 2020-up Gen5 RAM HD 2500 3500 (Not for RAM Classic)
ライトタイプ	18-SMD Full White LED
ワットtage	ライトあたり 3 ワット
OEM部品番号の交換	Mopar # 68211290AB, 68276972AA
アイテム重量	3.52オンス（キット合計）
パッケージ寸法	8.03 x 5.75 x 2.44インチ
レンズカラー	クリア
レンズ素材	プラスチック

保証とサポート

For information regarding product warranty, returns, or technical support, please contact iJDMTOY directly through their official webご購入いただいたサイトまたは販売店にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。

You can visit the official iJDMTOY store for more products and support: iJDMTOY Store on Amazon.

iJDMTOY 75-148-White