EDUP EP-9651GS-R

EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

Model: EP-9651GS-R

1. はじめに

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. パッケージ内容

下記のすべての品目がパッケージに含まれていることをご確認ください。不足または破損している品目がある場合は、販売店までご連絡ください。

  • 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
  • 2 x 6dBi Dual Band Antennas
  • 1 x Bluetooth 9-pin USB Cable
  • 1×ロープロfile ブラケット(小型PC用)
  • ドライバー x 1
  • 取り付けネジ
  • 1 x Driver CD (or download instructions)

3. セットアップとインストール

3.1 ハードウェアのインストール

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

  1. PC を準備します。 Power off your computer and unplug the power cord. Open the side panel of your PC case.
  2. PCI-E スロットを見つけます。 Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
  3. ネットワーク カードを挿入します。 Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
  4. Bluetoothケーブルを接続します。 Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
    Connecting Bluetooth cable to the EDUP WiFi 6 card and motherboard

    Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

  5. カードを安全に保管する: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile ブラケット。
  6. アンテナを接続します。 Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
    EDUP WiFi 6 card with two 6dBi dual-band antennas attached

    Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.

  7. PCケースを閉じる: Replace the side panel of your PC case and reconnect the power cord.

3.2 ドライバのインストール

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

  1. ドライバー CD の使用: 付属のドライバ CD を光学ドライブに挿入し、画面の指示に従って Wi-Fi および Bluetooth ドライバをインストールします。
  2. ドライバーのダウンロード: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel webサイトまたはEDUP web地点 (szedup.com). 検索する drivers compatible with the Intel AX200 chipset.
  3. インストールプロセス: ダウンロードしたドライバーのセットアップを実行する files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. 操作手順

4.1 Wi-Fiへの接続

Once the drivers are installed, you can connect to a wireless network:

  1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
  2. リストから希望の Wi-Fi ネットワークを選択します。
  3. 「接続」をクリックし、プロンプトが表示されたらネットワーク セキュリティ キー (パスワード) を入力します。
  4. これで、PC が Wi-Fi ネットワークに接続されるはずです。

4.2 Bluetoothデバイスの接続

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

  1. Windows 設定 > デバイス > Bluetooth とその他のデバイスに移動します。
  2. Bluetoothが「オン」になっていることを確認してください。
  3. 「Bluetoothまたはその他のデバイスを追加する」をクリックし、「Bluetooth」を選択します。
  4. Bluetoothデバイスをペアリングモードにします。
  5. リストからデバイスを選択し、画面上の指示に従ってペアリングを完了します。

5. 仕様

特徴説明
ブランド教育
モデル番号EP-9651GS-R
オペレーティング·システムWindows 10/11 64ビット
ワイヤレス標準IEEE 802.11ax/ac/b/g/n (Wi-Fi 6E)
データ転送速度最大5400Mbps(6GHz:2400Mbps、5.8GHz:2400Mbps、2.4GHz:600Mbps)
Bluetoothバージョンブルートゥース5.2
アンテナ2 x 6dBi Dual Band Antennas
ハードウェアインターフェイスPCI-E X1, X4, X8, X16 (Not for PCI slot)
寸法(長さx幅x高さ)8.66 x 5.12 x 1.46インチ
アイテム重量7.4オンス

6。 トラブルシューティング

If you encounter issues with your EDUP network card, refer to the following common solutions:

  • Wi-Fi または Bluetooth が検出されません:
    • Ensure the card is securely seated in the PCI-E slot.
    • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
    • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
    • Reinstall the latest drivers from the Intel or EDUP webサイト。
  • Wi-Fi 信号が弱い、または速度が遅い:
    • Adjust the position of the external antennas for better reception.
    • 最適なパフォーマンスを得るには、ルーターが Wi-Fi 6 (802.11ax) をサポートしていることを確認してください。
    • 他の電子機器からの干渉がないか確認してください。
    • ルーターのファームウェアを更新します。
  • Bluetoothが動作しない:
    • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
    • Windows 設定で Bluetooth が有効になっていることを確認します。
    • Reinstall the Bluetooth driver.

7. 保証とサポート

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.