1. はじめに
The iFlight SucceX-D F7 TwinG is an advanced F7 flight controller designed for high-performance FPV drones. It features a dual ICM20689 gyroscope system for enhanced stability and precision, a built-in OSD (On-Screen Display), BEC (Battery Eliminator Circuit), and current sensor. This flight controller is optimized for seamless integration with the DJI FPV Air Unit (HD Version), offering a plug-and-play solution for digital FPV systems.
Figure 1: iFlight SucceX-D F7 TwinG V2.1 Flight Controller highlighting F722 Gyro Fusion, Type-C USB, Plug & Play for DJI, 5V 9V BEC, and 30.5x30.5mm mounting.
2. 仕様
Below are the technical specifications for the iFlight SucceX-D F7 TwinG Flight Controller:
- プロセッサ: STM32F722
- Gyroscopes: Dual ICM20689
- OSD： Built-in BetaFlight OSD
- BEC: 5V and 9V outputs
- 電流センサー: はい
- ブラックボックス: はい
- USBポート: タイプC
- 取り付けパターン： 30.5×30.5ミリ
- 接続性: O3 (OcuSync 3.0) compatible for DJI FPV Air Unit
- 重さ： 約1.58オンス（45g）
Figure 2: Physical dimensions of the SucceX-D F7 TwinG Flight Controller, showing a 36mm x 36mm board size with 4mm mounting holes.
3. パッケージ内容
The standard package for the iFlight SucceX-D F7 TwinG Flight Controller typically includes:
- iFlight SucceX-D F7 TwinG Flight Controller unit
- Connection cables (e.g., for DJI Air Unit, ESC, receiver)
- Mounting hardware (e.g., standoffs, grommets)
Figure 3: The SucceX-D F7 TwinG Flight Controller shown with typical included accessories such as various connection cables and rubber grommets for mounting.
4. セットアップとインストール
Proper installation and wiring are crucial for the safe and correct operation of your flight controller. Always ensure power is disconnected before making any connections.
4.1.配線図
Refer to the detailed wiring diagram for connecting your flight controller to other components such as the ESC, receiver, VTX, GPS, and LED/Buzzer. Pay close attention to voltage requirements and pin assignments.
Figure 4: Comprehensive wiring diagram illustrating connections for DJI FPV Air Unit, various receivers (FrSky, TBS, DSMX), VTX, GPS, ESC, LED, and Buzzer.
4.2. Connecting to DJI FPV Air Unit
The SucceX-D F7 TwinG is designed for direct compatibility with the DJI FPV Air Unit. Use the provided cable to connect the Air Unit to the designated port on the flight controller. Ensure the correct pin orientation.
Figure 5: The flight controller connected to a DJI FPV Air Unit and camera, demonstrating the plug-and-play integration.
4.3. フライトコントローラーの取り付け
Mount the flight controller securely onto your drone frame using the provided standoffs and grommets. Ensure the board is oriented correctly according to your BetaFlight configuration. The 30.5x30.5mm mounting pattern is standard for many frames.
Figure 6: The flight controller mounted within a drone frame, showing connections to other components.
4.4. BetaFlightの設定
After physical installation, connect the flight controller to your computer via the USB Type-C port. Use the BetaFlight Configurator software to:
- Flash the latest firmware (if necessary).
- 受信機、VTX、GPS などの UART を構成します。
- 加速度計とジャイロスコープを校正します。
- Set up flight modes and OSD elements.
- Perform motor testing and ESC calibration.
Refer to the official BetaFlight documentation for detailed instructions on software configuration.
5. Operating the Flight Controller
Once installed and configured, the flight controller manages the drone's flight dynamics. Its dual gyroscopes provide precise data for stable flight. The integrated OSD displays critical flight information directly in your FPV feed.
- 電源オン: Connect the drone battery. The flight controller will initialize.
- 武装: Arm the drone using your configured switch on the remote controller. Ensure propellers are clear before arming.
- フライトモード： Select desired flight modes (e.g., Acro, Angle, Horizon) via your remote controller.
- OSD 情報: バッテリー容量を監視するtage, current draw, flight time, RSSI, and other data displayed on your FPV goggles or monitor.
6. メンテナンス
To ensure the longevity and reliable performance of your iFlight SucceX-D F7 TwinG Flight Controller, follow these maintenance guidelines:
- 清潔に保ちます： Regularly inspect the board for dust, dirt, or debris. Use compressed air or a soft brush to gently clean the components.
- 湿気を避ける: Protect the flight controller from water and excessive humidity. If exposed to moisture, ensure it is completely dry before powering on.
- 接続を検査する: Periodically check all soldered joints and connectors for looseness or damage. Re-solder or replace as necessary.
- ファームウェアの更新： Keep the BetaFlight firmware updated to benefit from performance improvements and bug fixes.
- 物理的保護: Consider using a protective enclosure or conformal coating for added durability, especially in harsh environments.
7。 トラブルシューティング
If you encounter issues with your flight controller, consider the following troubleshooting steps:
- 電源なし/LEDオフ:
- バッテリーの接続と音量を確認してくださいtage.
- Inspect power cables for damage or incorrect polarity.
- Verify BEC output if powering other components.
- No Connection to BetaFlight Configurator:
- Ensure USB Type-C cable is fully inserted and functional.
- 必要な VCP (仮想 COM ポート) ドライバーをインストールします。
- 別のUSBポートまたはコンピューターを試してください。
- 不安定な飛行:
- Recalibrate accelerometers in BetaFlight.
- Check for loose mounting or vibrations affecting the gyros.
- Verify PID settings are appropriate for your drone setup.
- OSDが表示されない:
- Ensure OSD is enabled in BetaFlight and configured correctly.
- VTX とカメラの接続を確認します。
- 受信機が応答しません:
- Verify receiver wiring to the correct UART.
- Ensure the correct serial receiver protocol (e.g., SBUS, Crossfire, Spektrum) is selected in BetaFlight.
- Check receiver binding status.
For more in-depth troubleshooting, consult the iFlight support resources or the BetaFlight documentation online.
8. 保証とサポート
For warranty information, please refer to the official iFlight web当サイトをご覧いただくか、販売店にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。
For technical support, firmware updates, and additional resources, please visit the official iFlight website or their dedicated support channels. Online communities and forums can also be valuable resources for assistance.
iFlight Official Webサイト： www.iflight-rc.com