Jansite 10 Inch Full Touch Screen Mirror Dash Cam Front and Rear Camera Instruction Manual

1. はじめに

Thank you for choosing the Jansite 10 Inch Full Touch Screen Mirror Dash Cam. This device is designed to enhance your driving safety and provide reliable recording of your journeys. Featuring dual 1080P HD cameras for both front and rear views, super night vision, and a responsive full touch screen, it offers comprehensive surveillance and ease of use. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance of your dash cam.

2. 箱の中身

パッケージの内容を確認し、すべてのアイテムが揃っていることを確認してください。

• 1 x 1080P Mirror Dash Cam (Main Unit)
• 1080Pリアカメラ×1
• 1 x 10m Backup Camera Cable (33ft)
• カーチャージャー x 1
• Rubber Straps for mounting
• ユーザーマニュアル

3. セットアップとインストール

3.1. SDカードの挿入

Before installation, insert a compatible Micro SD card (up to 128GB, not included) into the designated slot on the main dash cam unit. Ensure the card is inserted correctly until it clicks into place.

3.2. ミラー型ダッシュカムの取り付け

1. Place the mirror dash cam over your existing rearview 鏡。
2. Use the provided rubber straps to securely fasten the dash cam to your existing mirror. Ensure it is tightly secured to prevent movement during driving.
3. フロントカメラのレンズを調整して、希望する映像を撮影します。 view of the road ahead. The stretchable front cam allows for flexible positioning.

3.3. リアカメラの取り付け

1. Mount the IP68 waterproof rear camera on the back of your car, typically above the license plate. If you prefer to mount it inside on the rear windshield, an extra bracket may be required (not included).
2. Route the 10-meter (33ft) backup camera cable from the rear camera to the main mirror dash cam unit. Carefully tuck the cable along the car's headliner, A-pillar, and door gaps to conceal it and prevent interference.
3. Connect the red wire of the rear camera cable to the positive lead of your car's reversing light. This enables the parking assist feature when reversing.
4. Plug the rear camera cable into the designated port on the main mirror dash cam unit.

3.4. 電源接続

1. Connect the car charger to the main mirror dash cam unit.
2. Plug the car charger into your vehicle's cigarette lighter port.
3. 車を始動してダッシュカメラの電源を入れます。自動的に録画が始まります。

3.5. インストールビデオガイド

インストール プロセスの視覚的なガイドについては、次のビデオを参照してください。

4. 操作手順

4.1. 電源のオン/オフ

• 車両が始動すると、ダッシュ カメラの電源が自動的にオンになり、録画を開始します。
• To manually turn off the display screen while recording continues, short press the Power button.

4.2. タッチスクリーンインターフェース

The 10-inch full touch screen provides intuitive control:

• 切り替え Views: Slide left and right on the screen to switch between front camera view、リアカメラ view, or a split-screen display of both.
• 調整中 View 角度： Scroll up and down on the touchscreen to adjust the vertical viewアクティブカメラの角度を調整します。
• 明るさの調整: Slide left and right on the screen (when not switching views) to adjust the display brightness.

4.3. Recording Modes & Features

• ループ録音: 古いものを上書きすることで継続的な録画を保証します file■メモリーカードがいっぱいになったとき。
• Gセンサー: Automatically detects sudden collisions or impacts and locks the current video footag上書きされないようにするため。
• 24時間駐車監視: When enabled (requires an extra ACC hardwire kit, not included), the dash cam will automatically start recording a locked video for approximately 20 seconds if it detects a collision while parked.
• スーパーナイトビジョン： Both front and rear 1080P cameras provide enhanced night vision in low-light conditions, utilizing WDR/HDR technology and a Starvis sensor with a 6-glass lens for clearer images.
• パーキングアシスト: When shifting into 'R' (reverse) gear, the screen automatically displays the rear camera's perspective with guidelines to assist with safe parking.

4.4. 音声コントロール

The dash cam supports voice commands for hands-free operation. Refer to the video below for a demonstration of voice control features:

4.5. 再生と File 管理

Access recorded videos and images directly on the touch screen. Files are typically organized by date and time. Locked files (from G-sensor activation or parking monitor) are stored separately to prevent accidental deletion.

5. メンテナンス

• クリーニング： Use a soft, dry cloth to clean the screen and camera lenses. Avoid abrasive materials or harsh chemicals.
• SD カードのフォーマット: Regularly format your Micro SD card (at least once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the dash cam's settings menu.
• ファームウェアの更新： Check the Jansite official webパフォーマンスの向上や新機能の追加のために、利用可能なファームウェア アップデートを定期的にサイトから確認してください。

6。 トラブルシューティング

• ダッシュカムの電源が入らない: Ensure the car charger is securely connected to both the dash cam and the car's cigarette lighter port. Check if the vehicle's power outlet is functioning.
• 録音の問題: Verify that the Micro SD card is inserted correctly and has sufficient free space. Format the SD card if necessary. Check the loop recording settings.
• リアカメラが表示されない: Ensure the rear camera cable is securely connected to both the rear camera and the main unit. Check the wiring to the reverse light if the parking assist feature is not working.
• 画面がフリーズする/応答しない: Try resetting the device (if a reset button is available, use a thin pin). If the issue persists, contact customer service.
• 夜間視力が悪い: Ensure camera lenses are clean. Verify that WDR/HDR settings are enabled in the menu.

7. 仕様

8.保証とサポート

Jansite is committed to providing high-quality products and excellent customer service. Your Jansite Mirror Dash Cam comes with a standard warranty (please refer to your purchase documentation for specific terms and duration).

For any questions, technical support, or warranty claims, please do not hesitate to contact our customer service team. We offer 24-hour customer service to assist you.

• 顧客サービス： 24時間7日対応
• 連絡先： Please refer to your product packaging or the official Jansite web最新の連絡先情報については、サイトをご覧ください。