導入
The MOUNT PRO Single Monitor Desk Mount is designed to enhance your workspace by providing flexible and ergonomic monitor positioning. This full-motion mount features a gas spring arm for smooth adjustments, allowing you to set your monitor at an ideal distance and height. It supports 360° rotation, ±90° swivel, and -45°/+90° tilt functions, optimizing your viewing experience and freeing up valuable desk space. Built with durability in mind, the monitor arm has passed a 10,000-cycle test, ensuring long-lasting performance.
The MOUNT PRO Single Monitor Desk Mount, showcasing its articulating arm and dual mounting options.
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド名 | マウントプロ |
| モデル番号 | PR1001-1 |
| アイテム重量 | 5.15ポンド |
| パッケージ寸法 | 17.01 x 5.79 x 5.51インチ |
| 原産国 | 中国 |
| 色 | 黒 |
| 取り付けタイプ | テーブルトップマウント（Clamp またはグロメット） |
| 移動タイプ | 回転、旋回、傾斜、関節可動 |
| 材料 | アルミニウム |
| 最小対応画面サイズ | 13インチ |
| 最大対応画面サイズ | 32インチ |
| 対応モニター重量 | 4.4～17.6ポンド |
| VESA互換性 | 75x75mm、100x100mm |
| 最大傾斜角度 | 90度 |
互換性
Before installation, ensure your monitor and desk meet the following compatibility requirements:
- モニターサイズ: Compatible with screens from 13 to 32 inches.
- モニターの重量: Supports monitors weighing between 4.4 lbs and 17.6 lbs.
- VESA パターン: Compatible with VESA mounting patterns of 75x75mm and 100x100mm.
- デスクの厚さ（C-Clamp): clの場合amp mounting, your desk thickness must be between 0.39 inches and 4.52 inches.
- デスクの厚さ（グロメット）: For grommet mounting, your desk thickness must be between 0.39 inches and 3.15 inches, with a hole diameter between 0.39 inches and 2.36 inches.
Visual guide for display compatibility.
Desk compatibility details for various desk types.
セットアップとインストール
The MOUNT PRO Single Monitor Desk Mount offers two installation methods: C-Clamp and Grommet mounting. A detailed installation manual in PDF format is available for download: インストールマニュアル（PDF）.
インストールオプション:
- C-Clamp 取り付け: Ideal for desks with thicknesses from 0.39" to 4.52". This method clamps the mount securely to the edge of your desk.
- グロメット取り付け: Suitable for desks with existing grommet holes (0.39"-2.36" diameter) and thicknesses from 0.39" to 3.15". This provides a flush, integrated look.
Illustration of C-Clamp グロメット取り付けオプション。
While installation is designed to be straightforward with labeled parts and clear instructions, it is recommended that two people assist with the initial setup, especially when attaching the monitor to the arm and securing the base, to ensure stability and prevent accidental damage.
運営と調整
The MOUNT PRO monitor arm provides full motion adjustment to achieve your optimal ergonomic position. Key adjustment points include:
- ガススプリング調整: This controls the vertical movement of the arm. If your monitor raises up, turn the adjustment screw clockwise (towards '-') to reduce tension for a lighter monitor. If your monitor falls down, turn counter-clockwise (towards '+') to increase tension for a heavier monitor. Always keep the arm in a horizontal position during adjustment.
- 傾き調整： Loosen the tilting bolt (turn towards '-') to adjust your monitor to the desired tilt angle (-45° to +90°). Retighten the bolt (turn towards '+') to secure the angle.
- スイベル調整: The arm allows for ±90° swivel at the monitor plate and ±180° swivel at the arm joints, providing flexible side-to-side movement.
- 回転： The monitor can be rotated 360° for landscape or portrait orientation.
Detailed instructions for tension and tilt adjustments.
Visual guide for customizing your monitor's view角度。
Illustration of the full motion capabilities, including height (5.9"-16.5") and extension (16.2"-19.6").
ケーブル管理
The monitor arm features integrated cable management channels to keep your workspace tidy. Plastic covers along the arm can be removed to route and conceal your cables, leading them down to the desk grommet or along the desk edge for a clean setup.
メンテナンス
To ensure the longevity and optimal performance of your MOUNT PRO monitor arm, regular maintenance is recommended:
- すべてのネジと接続がしっかりと固定されているか定期的に確認してください。
- アームとベースを柔らかくて乾いた布で拭きます。amp 布で埃やゴミを拭き取ってください。研磨剤入りの洗剤は使用しないでください。
- If the arm's movement becomes stiff or too loose, re-adjust the gas spring tension as described in the Operating and Adjustments section.
トラブルシューティング
- Monitor Tilts Down / Does Not Hold Position: This typically indicates insufficient gas spring tension for the monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise (towards '+'). Ensure the monitor's weight is within the 4.4-17.6 lbs range.
- Monitor Stays Too High / Does Not Lower: This suggests too much gas spring tension for a lighter monitor. Decrease the tension by turning the adjustment screw clockwise (towards '-'). For very light monitors (e.g., 2.65 lbs), the arm might remain in the highest position even at the loosest setting. In such cases, adding a small amount of weight to the monitor or arm might be necessary to achieve desired lower positions.
- Arm Feels Loose / Wobbly: Check all connection points, especially the desk clamp/grommet base and the VESA plate screws, to ensure they are securely tightened.
保証とサポート
MOUNT PRO is committed to providing professional customer service. For any questions, concerns, or support needs regarding your monitor mount, please refer to the official MOUNT PRO store or contact their customer service directly. Information regarding optional protection plans (2-Year, 3-Year, Complete Protect) is available at the point of purchase.
Visit the MOUNT PRO Store: MOUNT PRO Store on Amazon