Justfog Q16 Pro 900mAh キット ユーザーマニュアル

導入

This manual provides detailed instructions for the safe and effective use of your Justfog Q16 Pro 900mAh Kit. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

安全情報

• デバイスを子供やペットの手の届かない場所に保管してください。
• デバイスを極端な温度、直射日光、水にさらさないでください。
• Use only the recommended charging cable and adapter.
• デバイスを分解したり改造したりしないでください。
• If you experience any unusual odors, overheating, or leakage, discontinue use immediately and contact support.

パッケージ内容

The Justfog Q16 Pro Kit typically includes:

• 1x Justfog Q16 Pro Battery (900mAh)
• 1x Justfog Q16 Pro Clearomizer (1.9ml)
• 1x Coil (pre-installed or spare)
• 1x USB充電ケーブル
• ユーザーマニュアル x 1

製品終了view

画像： The Justfog Q16 Pro Kit, featuring the battery mod and the clearomizer tank. The image displays four color variations: black, blue, pink, and silver. Each device consists of a rectangular battery base with a firing button and LED indicators, topped with a transparent clearomizer tank and a black drip tip. The clearomizer shows the internal coil structure.

The Justfog Q16 Pro is a compact and user-friendly electronic cigarette kit. It consists of two main parts: the battery mod and the clearomizer (tank).

• Battery Mod: Houses the 900mAh battery, firing button, and LED indicators for battery life and voltage設定。
• Clearomizer (Tank): Holds up to 1.9ml of e-liquid and contains the replaceable coil. It features a top-fill design and adjustable airflow.

設定

1. バッテリーの充電

1. Connect the small end of the USB charging cable to the charging port on the side of the Q16 Pro battery.
2. Connect the other end of the USB cable to a suitable USB power source (e.g., computer USB port, wall adapter).
3. The LED indicator lights will show the charging status. Once fully charged, the lights will indicate completion (refer to operating section for specific light patterns).

2. Installing/Replacing the Coil

1. Unscrew the clearomizer from the battery mod.
2. クリアマイザーを逆さまにしてベースを外します。
3. 古いコイルをベースから慎重に外します。
4. 新しいコイルをクリアロマイザーベースにしっかりとねじ込みます。
5. 重要： Before first use, prime the coil by dripping a few drops of e-liquid onto the cotton wicking holes of the new coil.

3. Filling the Clearomizer

1. Ensure the clearomizer is detached from the battery.
2. Unscrew the top cap of the clearomizer.
3. Carefully fill the tank with e-liquid through one of the two filling ports, avoiding the central airflow tube. Do not overfill.
4. 上部のキャップをしっかりと締め直します。
5. 重要： After filling a new coil, let the device stand upright for 5-10 minutes to allow the e-liquid to fully saturate the coil. This prevents dry hits and extends coil life.

4. Attaching the Clearomizer

1. Screw the filled clearomizer onto the Q16 Pro battery mod until finger-tight. Do not overtighten.

操作手順

1. 電源のオン/オフ

• デバイスをオンにするには ON, press the firing button 5 times rapidly within 2 seconds. The LED lights will flash.
• デバイスをオンにするには オフ, press the firing button 5 times rapidly within 2 seconds. The LED lights will flash.

2. ボリュームの調整tage出力

The Q16 Pro offers 4 levels of voltage output. To adjust the voltage:

• 巻を押すtage adjustment button (usually located below the firing button) to cycle through the voltageレベル。
• Each press will change the voltage, indicated by the LED lights. Refer to the table below for voltageレベル。

3. 電子タバコ

Once the device is on and the tank is filled and primed:

• Place the drip tip in your mouth.
• Press and hold the firing button while inhaling. Release the button when you finish inhaling.
• The Q16 Pro supports both Mouth-to-Lung (MTL) and Direct-to-Lung (DL) vaping styles, depending on your preference and coil choice.

4. バッテリー残量インジケーター

The LED indicators on the battery mod also display the remaining battery life:

• 4つのLED： 75-100%
• 3つのLED： 50-75%
• 2つのLED： 25-50%
• 1つのLED： 0-25% (Recharge soon)

メンテナンス

1. Cleaning the Clearomizer

• Regularly clean the clearomizer, especially when changing e-liquid flavors or if residue builds up.
• Disassemble the clearomizer (remove coil, top cap, and base).
• Rinse all parts (except the coil) with warm water. Allow them to air dry completely before reassembling.

2. Replacing the Coil

Coils are consumable parts and need to be replaced periodically, typically every 1-3 weeks depending on usage and e-liquid. Replace the coil if you notice a burnt taste, reduced vapor production, or diminished flavor. Follow the "Installing/Replacing the Coil" steps in the Setup section.

3. 一般的なケア

• Keep the device clean and dry. Wipe down the exterior with a soft, dry cloth.
• 充電ポートにほこりやごみがないことを確認してください。
• デバイスを使用しないときは、涼しく乾燥した場所に保管してください。

トラブルシューティング

仕様

保証とサポート

保証情報とカスタマーサポートについては、製品パッケージに同梱されている保証書を参照するか、Justfogの公式ウェブサイトをご覧ください。 webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

If you encounter issues not covered in this manual, please contact Justfog customer service for assistance.