1.製品オーバーview
The Phanteks NEON Digital-RGB LED Strip M1 is a 1-meter flexible lighting strip designed to enhance the aesthetic of your PC hardware. It features high-quality Digital-RGB LEDs that provide a smooth and consistent illumination across the entire strip, offering a full range of colors. Its flexible design and multiple mounting options allow for versatile placement within your computer case, illuminating components such as motherboards, GPUs, and other internal hardware. The strip is compatible with Digital-RGB equipped motherboards and other Phanteks Digital-RGB products, ensuring synchronized lighting effects.
主な特徴:
- High-Quality Digital-RGB: Provides a smooth and stable illumination with a full color range.
- 柔軟な取り付け: Designed for versatile placement around PC components.
- デイジーチェーンデザイン: Allows for easy expansion and connection with additional strips.
- マザーボードの互換性: Works with Digital-RGB equipped motherboards for synchronized lighting.
- 効率的な電力消費: Operates with low power usage.
2. 箱の中身
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- 1x Phanteks NEON Digital-RGB LED Strip M1 (1-meter)
- Mounting Clips (various types for straight and angled placement)
- 3M Adhesive Pads (for securing mounting clips)
- Digital-RGB Motherboard Adapter Cable
Image: Included mounting clips and adhesive pads for the LED strip.
3.インストールガイド
Follow these steps to properly install your Phanteks NEON Digital-RGB LED Strip M1:
- プランの配置: Determine the desired location for your LED strip within your PC case. Consider areas around the motherboard, GPU, or case edges for optimal lighting effect. The strip is flexible and can be shaped to fit various contours.
- 表面の準備: Ensure the mounting surface is clean, dry, and free of dust or grease for optimal adhesive performance.
- Attach Adhesive to Clips: Peel the backing from the 3M adhesive pads and apply them firmly to the back of the mounting clips.
- 安全なクリップ: Position the mounting clips along your planned route and press them firmly onto the surface. Use enough clips to securely hold the strip in place, especially around bends or corners.
- LEDストリップを挿入します: Carefully insert the Phanteks NEON Digital-RGB LED Strip into the secured mounting clips. Ensure the strip is seated properly and evenly.
Image: The LED strip shown with various mounting clips for flexible installation.
- マザーボードに接続: Locate an available 3-pin Digital-RGB header (often labeled 'ARGB' or 'Digital RGB') on your motherboard. Connect the Digital-RGB motherboard adapter cable to the LED strip, then connect the other end to the motherboard header. Ensure correct pin orientation to avoid damage.
- デイジーチェーン接続 (オプション): If you are using multiple Phanteks Digital-RGB products, you can daisy chain them together using the provided extension cable to synchronize lighting effects.
Image: The LED strip installed along the edge of a motherboard, showcasin照明機能。
取り付け例ampレ：
Example: LED strip configured with a right-angle bend using a corner clip.
Example: LED strip arranged in a smooth, wavy pattern.
4. 操作手順
The Phanteks NEON Digital-RGB LED Strip M1 is controlled via your motherboard's Digital-RGB software or a compatible external controller. It does not feature an integrated button control on the strip itself.
- マザーボードソフトウェア: If connected to a Digital-RGB header on your motherboard, use the motherboard manufacturer's dedicated RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.
- 外部コントローラー: If you are using a Phanteks Digital-RGB controller or another compatible third-party controller, refer to that controller's specific instructions for operation.
画像: LEDストリップショーasing a smooth, multi-color lighting effect.
5. メンテナンス
To ensure the longevity and optimal performance of your LED strip, follow these simple maintenance guidelines:
- クリーニング： Gently wipe the surface of the LED strip with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the strip's surface or internal components.
- ほこりの除去: Periodically use compressed air to remove dust accumulation from the strip and surrounding areas within your PC case.
- 接続チェック: Ensure all cables and connectors remain securely attached to the LED strip and motherboard. Loose connections can lead to intermittent lighting or functionality issues.
- 過度の曲げを避ける: While flexible, avoid bending the strip sharply or repeatedly at extreme angles, as this can damage the internal wiring or LED components.
6。 トラブルシューティング
If you encounter issues with your Phanteks NEON Digital-RGB LED Strip M1, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| LEDストリップが点灯しません。 | Loose connection, incorrect header, power issue. | Ensure the Digital-RGB cable is securely connected to both the LED strip and the motherboard's 3-pin Digital-RGB header. Verify the motherboard header is enabled in BIOS/UEFI or software. Check power supply connections to the motherboard. |
| Incorrect colors or flickering. | Software conflict, incorrect pinout, faulty strip. | Ensure only one RGB control software is running. Verify the Digital-RGB cable is connected to a 3-pin Digital-RGB header, not a 4-pin RGB header. Update motherboard RGB software. If the issue persists, the strip may be faulty. |
| Adhesive pads are not holding the clips. | Improper surface preparation, weak adhesive. | Clean the mounting surface thoroughly with isopropyl alcohol and let it dry completely before applying adhesive. Apply firm pressure for at least 30 seconds when attaching clips. For persistent issues, consider using stronger double-sided adhesive tape. |
| Cannot control lighting effects. | Software not installed/configured, incompatible header. | Install and configure your motherboard's Digital-RGB control software. Ensure the strip is connected to a 3-pin Digital-RGB header. Consult your motherboard manual for specific RGB header information. |
7. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | PH-NELEDKT_M1 |
| 長さ | 1 Meter (39.4 Inches) |
| 色 | Multicolor, Neon (Digital-RGB) |
| 光源の種類 | 導かれた |
| 巻tage | 5ボルト |
| ワットtage | 18ワット |
| 光源の数 | 70 |
| 材料 | 金属、ビニール |
| 屋内/屋外での使用 | 屋内 |
| 制御方法 | App (via motherboard software) |
| アイテム重量 | 6.7オンス |
8. 保証とサポート
Phanteks products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, including coverage period and terms, please refer to the warranty information provided with your product packaging or visit the official Phanteks webサイト。
For technical support, troubleshooting assistance, or inquiries regarding your Phanteks NEON Digital-RGB LED Strip M1, please contact Phanteks customer service through their official webサイトまたは製品ドキュメントに記載されている連絡先情報を参照してください。
