導入
This manual provides instructions for the installation, use, and maintenance of your Nyko Screen Armor tempered glass screen protector for the Nintendo Switch Lite. The Screen Armor is designed to protect your device's screen from scratches, chips, fingerprints, and smudges with its 9H hardness rating and oleophobic coating.
パッケージ内容
- 1x Nyko Screen Armor Tempered Glass Screen Protector
- 1x Wet Cleaning Wipe
- 1x Dry Cleaning Wipe
The Nyko Screen Armor package includes one tempered glass screen protector, one wet cleaning wipe, and one dry cleaning wipe.
インストール手順
Follow these steps carefully for optimal installation of your Nyko Screen Armor:
- スクリーンを準備する: Use the included wet cleaning wipe to thoroughly clean the Nintendo Switch Lite screen, removing all dust, dirt, and smudges.
- スクリーンを乾かす: Use the included dry cleaning wipe to dry the screen completely. Ensure no lint or moisture remains.
- スクリーンプロテクターの位置を合わせます。 Carefully peel off the protective film from the adhesive side of the Nyko Screen Armor. Align the screen protector with the edges of your Nintendo Switch Lite screen. Ensure the cutouts for speakers and sensors match perfectly.
- スクリーンプロテクターを貼り付けます。 位置合わせが完了したら、スクリーンプロテクターを画面にゆっくりと下ろします。自動的に貼り付き始めます。
- 気泡を取り除く: If any air bubbles are present, gently push them towards the edges of the screen using a soft cloth or your finger. Small bubbles should disappear within 24-48 hours.
This diagram shows the key features of the Nyko Screen Armor, including its precision fit for the Nintendo Switch Lite, 9H tempered glass hardness, oleophobic coating to resist smudges, and rounded edges to prevent chipping. The image also indicates the included cleaning wipes.
使用方法とお手入れ
Once installed, the Nyko Screen Armor provides continuous protection for your Nintendo Switch Lite screen. The oleophobic coating helps reduce fingerprints and smudges during normal use.
- Avoid placing sharp objects directly against the screen protector to prevent damage, despite its high hardness rating.
- For cleaning, gently wipe the screen protector with a soft, lint-free cloth. Avoid harsh chemicals.
The Nyko Screen Armor provides a clear protective layer over the Nintendo Switch Lite screen.
メンテナンス
Regular maintenance ensures the longevity and clarity of your screen protector.
- Periodically clean the screen protector with a microfiber cloth to remove fingerprints and dust.
- If the screen protector becomes severely scratched or damaged, it is recommended to replace it to maintain optimal screen protection and visibility.
トラブルシューティング
取り付け後の気泡
If small air bubbles remain after installation, gently push them towards the nearest edge with a soft cloth. Most small bubbles will dissipate naturally within 24-48 hours as the adhesive fully settles.
ずれ
If the screen protector is significantly misaligned, it may be necessary to carefully lift it from one corner and reapply. This should be done immediately after initial application before the adhesive fully cures. Avoid excessive force to prevent damage to the screen protector or device.
Screen Protector Not Sticking
Ensure the screen was thoroughly cleaned and dried before application. Any dust, oil, or moisture can prevent proper adhesion. If the issue persists, the screen protector may be defective or damaged, and replacement might be necessary.
製品仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 87288 |
| Hardness Rating | 9H |
| 材料 | 強化ガラス |
| 特集 | Oleophobic Coating, Rounded Edges, Precision Fit |
| 製品寸法 | 0.39 x 0.39 x 0.5インチ |
| アイテム重量 | 0.81オンス |
| メーカー | ニコ |
| 発売日 | 16年2019月XNUMX日 |
保証とサポート
For warranty information or technical support regarding your Nyko Screen Armor, please refer to the official Nyko web公式サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。