導入
The AikTryee Multipurpose Laser Level Tool is designed for precision and ease of use in various indoor measurement and leveling tasks. It integrates multiple functionalities including a laser line projector, spirit levels, and a measuring tape, making it an essential tool for hanging shelves, cabinets, tiles, and picture frames with accuracy. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Figure 1: AikTryee Multipurpose Laser Level Tool with included batteries.
製品終了view およびコンポーネント
Familiarize yourself with the key components of your laser level tool:
- レーザー発光ポート: Projects the laser line.
- Laser Control Switch: Toggles between horizontal, vertical, and cross-line laser modes.
- Spirit Levels: Three bubble vials (horizontal, vertical, 45°) for accurate leveling.
- メジャーテープ: 8-foot (2.5-meter) retractable tape measure with imperial and metric graduations.
- Rulers: Integrated standard metric and imperial rulers on the base.
- バッテリーコンパートメント: Houses the LR44 batteries.
図2：詳細 view of the laser level's components.
設定
Your AikTryee Laser Level comes with batteries included. To install or replace batteries:
- Locate the battery compartment cover on the side of the device.
- Use a small screwdriver (often included) to open the compartment.
- Insert three LR44 size batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- バッテリーコンパートメントカバーをしっかりと閉じます。
操作手順
1. Laser Line Projection
The laser level features a single slider selection button on the front for easy mode switching. This button controls the vertical, horizontal, and cross-line laser modes.
- 水平線: Slide the button to the 'Mode -' position to project a horizontal laser line.
- 垂直線: Slide the button to the 'Mode |' position to project a vertical laser line.
- クロスライン: Slide the button to the 'Mode +' position to project both horizontal and vertical laser lines simultaneously.
Ensure the laser is turned on using the red ON/OFF switch located near the laser emission port.
Figure 3: Laser line modes controlled by the slider switch.
図4：例ample of the laser projecting cross-lines.
2. Spirit Level Usage
The tool includes three bubble vials to determine horizontal, vertical, and 45-degree angles:
- Horizontal Level (0°): Use the central bubble vial to check for horizontal alignment. The bubble should be centered between the two lines.
- Vertical Level (90°): Use the bubble vial on the side to check for vertical alignment. The bubble should be centered.
- 45°の角度: Use the third bubble vial to check for 45-degree angles. The bubble should be centered.
3. 巻尺
The integrated 8-foot (2.5-meter) measuring tape is located on the side of the device. To use:
- Gently pull the tape measure out from its housing.
- The tape will automatically lock in place when extended.
- To retract, press the button located on the side of the tape measure housing.
4. Rulers
The base of the laser level features standard metric and imperial rulers, providing quick and convenient measurements for smaller tasks.
アプリケーション
The AikTryee Multipurpose Laser Level Tool is ideal for a wide range of home improvement and DIY projects, ensuring precision and efficiency:
- 絵画の掛け方: Use the horizontal laser line to perfectly align multiple picture frames on a wall.
- キャビネットの設置: Achieve perfectly level and plumb cabinet installations using the spirit levels and laser lines.
- タイル敷設: Project precise grid lines for accurate tile placement on floors or walls.
- 棚板の取り付け： Ensure shelves are mounted straight and level.
- Wallpaper Alignment: Create straight guidelines for wallpaper application.
Figure 5: Using the laser level for accurate picture hanging.
Figure 6: The laser level assisting in precise tile placement.
Figure 7: Ensuring level cabinet installation with the tool.
メンテナンス
To ensure the longevity and accuracy of your AikTryee Laser Level Tool, follow these maintenance guidelines:
- クリーニング： Wipe the device with a soft, dry cloth after each use. Avoid using abrasive cleaners or solvents that could damage the plastic or laser lens.
- ストレージ： Store the tool in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period to prevent leakage.
- 取り扱い： Handle the tool with care to avoid dropping it, which could affect the calibration of the spirit levels or damage the laser component.
トラブルシューティング
レーザー レベルで問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| レーザーがオンになりません。 | 電池が切れているか、正しく取り付けられていない。 | 電池の極性を確認し、必要に応じて電池を交換してください。 |
| レーザーラインが暗い、または見えません。 | Bright ambient light; dirty laser emission port. | Use in lower light conditions; clean the laser emission port with a soft cloth. |
| Spirit level bubble is not centered when placed on a known level surface. | Tool is not calibrated or damaged. | Ensure the surface is truly level. If persistent, the tool may be damaged and require replacement. |
| 巻尺がスムーズに引き込まれません。 | 機構の妨害または損傷。 | Ensure no debris is obstructing the tape. Avoid forcing retraction. |
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | アイクトライ |
| モデル番号 | レーザーレベル |
| 色 | 赤色レーザー |
| 材料 | アクリロニトリルブタジエンスチレン |
| 製品寸法 | 長さ3.34インチ x 幅1.1インチ |
| アイテム重量 | 6オンス |
| 操作モード | マニュアル |
| 電源 | 電池駆動 |
| 電池が必要 | Yes (3 x LR44, included) |
| Measuring Tape Length | 8フィート/2.5メートル |
保証とサポート
AikTryee is committed to providing high-quality products and excellent customer service. For any questions, concerns, or support needs regarding your Multipurpose Laser Level Tool, please refer to the contact information provided with your product packaging or visit the official AikTryee webサイトでご確認ください。保証請求の際に必要となりますので、購入証明書を保管してください。