導入
This manual provides instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
安全情報
重要な安全上の注意事項
- これらの指示をよくお読みください。
- 今後の参照用にこれらの手順を保管してください。
- Heed all warnings provided with the product and in this manual.
- すべてのインストールおよび操作手順に従ってください。
- この装置を水の近くや極端に湿度の高い環境で使用しないでください。
- 乾いた布でのみ清掃してください。
- Install the camera in accordance with the manufacturer's instructions and local electrical codes.
- すべてのメンテナンスは資格を持ったサービス担当者にお任せください。本製品をご自身でメンテナンスすることは絶対におやめください。
パッケージ内容
含まれるもの
下記のすべての品目がパッケージに含まれていることをご確認ください。不足品や破損品がある場合は、直ちに販売店にご連絡ください。
- Pelco P2230L-ESR PTZ Network Camera
- 取り付け金具（ネジ、アンカー）
- インストールテンプレート
- クイックスタートガイド
製品終了view
カメラコンポーネント
The Pelco P2230L-ESR is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for environmental surveillance. It features a 2-megapixel sensor, infrared (IR) illumination, Wide Dynamic Range (WDR), and full HD resolution for clear imaging in various conditions.
This image displays the Pelco P2230L-ESR PTZ Network Camera, showing its dome-shaped lower section containing the lens and the cylindrical upper housing.
主な特徴
- センサー： 1/3インチCMOSセンサー
- 解決： 1920 x 1080（フルHD 1080p）
- レンズ： 4.3 mm ~ 129 mm varifocal Lens
- 光学ズーム: 30倍
- IR照明: 850 nm, up to 150 m range
- ビデオエンコーディング： H.265, H.264, and MJPEG
- 範囲を傾ける： +15°～-90°
- 低照度性能: Down to 0.3 lux
- ワイドダイナミックレンジ(WDR): 100デシベル
- 検出： サボtage and Simple Motion Detection
- IPコード： IP66 weatherproof for outdoor use
設定
インストールガイド
The camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions. Proper installation is crucial for optimal performance and longevity.
This diagram illustrates the detailed dimensions of the Pelco P2230L-ESR camera in various views (front, side, top, bottom), providing measurements in both inches and centimeters for precise installation planning.
配線と接続
- 電源接続: Connect the camera to a suitable power source as specified in the technical specifications. Ensure the power supply meets the camera's requirements.
- ネットワーク接続： Connect an Ethernet cable from the camera's network port to your network switch or router. This provides both data and potentially Power over Ethernet (PoE) if supported by your switch.
- Optional I/O Connections: If applicable, connect external alarm inputs/outputs or audio devices according to the camera's interface and your system requirements. Refer to the detailed wiring diagram in the full product manual for specific pinouts.
This image shows a standard blue Ethernet cable with RJ45 connectors, used for establishing a wired network connection to the camera.
初期ネットワーク構成
物理的に設置した後、カメラの web interface using its default IP address or by using a Pelco discovery tool. Follow the on-screen prompts to set up network parameters, create secure user accounts, and configure initial camera settings such as time zone and date.
オペレーティング
カメラ操作
アクセス Web インタフェース
開く web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using your configured username and password. The web interface provides access to live view, recording settings, motion detection, and PTZ controls.
パン・チルト・ズーム（PTZ）制御
Use the PTZ controls within the camera's web interface or a compatible VMS (Video Management System) to adjust the camera's pan, tilt, and zoom functions.
- パン： Rotates the camera horizontally to cover a wider area.
- Adjusts the camera's vertical angle to look up or down.
- ズーム： Magnifies or de-magnifies the view. The camera features a powerful 30x optical zoom for detailed observation.
記録と保存
Configure recording schedules, motion-triggered recording, and continuous recording options. Set up storage destinations such as Network Attached Storage (NAS) or a local SD card (if supported by the specific camera model) for video archives.
モーション検出
Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the defined surveillance area. This feature helps in efficient monitoring and storage management.
メンテナンス
お手入れとメンテナンス
クリーニング
カメラのレンズとハウジングを定期的に柔らかくてきれいな布で拭いてください。amp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the optical surfaces or the camera's finish. For stubborn dirt, use a mild soap solution.
ファームウェアの更新
Periodically check the official Pelco website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, enhances security features, and provides access to new functionalities. Follow the instructions provided with the firmware update package carefully.
環境への配慮
Ensure the camera's seals and connections remain intact to maintain its IP66 weatherproof rating, especially after any maintenance or installation adjustments. Inspect for any signs of wear or damage that could compromise its environmental protection.
トラブルシューティング
よくある問題と解決策
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ビデオフィードなし | Power issue, network cable disconnected, incorrect IP address, camera malfunction | Check power supply, verify network cable connection, confirm IP address and network settings. Restart the camera. |
| 画質が悪い | Dirty lens, improper focus, low light conditions, network bandwidth limitations | Clean the lens, adjust focus via the web interface, ensure adequate lighting, check network bandwidth and camera settings. |
| PTZコントロールが反応しない | Network connectivity issues, software glitch, camera malfunction, incorrect user permissions | Verify network connection, restart the camera, update firmware, check user permissions in the web インタフェース。 |
| モーション検出が機能しない | Incorrect sensitivity settings, detection zones not configured, event actions not set | Adjust motion detection sensitivity and ensure zones are properly defined in the web interface. Verify event actions are configured. |
| アクセスできません web インタフェース | Incorrect IP address, firewall blocking, network issue, browser compatibility | Confirm camera's IP address, check local network settings and firewall rules. Try a different web ブラウザ。 |
| IR illumination not working | IR sensor blocked, setting disabled, hardware fault, insufficient power | Ensure IR sensor is clear, check IR settings in the web interface, verify power supply. Contact support if issue persists. |
仕様
技術仕様
- モデル： P2230L-ESR
- センサー： 1/3インチCMOSセンサー
- 解決： 1920 x 1080（フルHD 1080p）
- レンズ： 4.3 mm ~ 129 mm varifocal Lens
- 光学ズーム: 30倍
- IR範囲: Up to 150 m (850 nm IR Illumination)
- ビデオエンコーディング： H.265、H.264、MJPEG
- 範囲を傾ける： +15°～-90°
- 低光量: Down to 0.3 lux
- ワイドダイナミックレンジ(WDR): 100デシベル
- フレームレート: Up to 60 Images per Second (ips)
- 検出： サボtage and Simple Motion Detection
- 国際保護等級: IP66（耐候性）
- 取り付けタイプ: 壁掛け
- 接続性: Wi-Fi（無線通信技術）
- 国際コード: 700880346648
保証とサポート
Product Warranty and Customer Support
For detailed warranty information, please refer to the official Pelco website or the warranty card included with your product package. Warranty terms and conditions may vary by region and purchase date.
For technical assistance, troubleshooting, or further inquiries regarding your Pelco P2230L-ESR camera, please contact Pelco customer support. Their team can provide expert guidance and resolve any issues you may encounter.
You can find contact information and additional resources, including comprehensive product documentation and FAQs, on the official Pelco webサイト： www.ペルコ.com