Nerf Alpha Strike Cobra RC-6 Dual Targeting Set Instruction Manual

1.製品オーバーview

The Nerf Alpha Strike Cobra RC-6 Dual Targeting Set is designed for engaging Nerf battles and skill practice. This 26-piece set provides everything needed to start playing immediately, offering a straightforward and exciting experience for users.

含まれるもの:

• 2 Cobra RC-6 Blasters: Compact and easy-to-use blasters, each capable of holding 6 darts.
• 20 Official Nerf Elite Darts: Tested and approved for performance and quality, made of foam with flexible hollow tips.
• 4 Half-Targets: These can be configured in various ways or combined to create 2 full targets for practice.

Image: The complete Nerf Alpha Strike Cobra RC-6 Dual Targeting Set, showcasing the blasters, darts, and targets.

2. 安全情報

WARNING: To avoid injury, use only with official NERF darts. Other darts may not meet safety standards. Do not modify darts or dart blaster.

• 推奨年齢: 対象年齢8歳以上。
• 目の保護: Always wear eye protection when using blasters. Do not aim at eyes or face.
• ダーツの互換性: Use only official Nerf Elite darts. Unofficial darts may cause damage to the blaster or injury.
• Blaster Modification: Do not modify the blaster in any way. Modifications can affect performance and safety.
• 指の安全性: When priming the blasters, especially the Cobra RC-6, ensure fingers are clear of moving parts to prevent pinching.

3. セットアップ

3.1. Assembling Targets

The set includes 4 half-targets. These can be used individually or combined to form larger targets.

• To create a full target, align the connecting tabs of two half-targets and press them together until they click securely.
• Place targets on a stable, flat surface for best results.

3.2. Preparing Blasters

No batteries are required for the Cobra RC-6 blasters.

• Ensure blasters are clean and free of obstructions before use.
• Inspect darts for any damage or wear. Replace damaged darts to ensure optimal performance and safety.

4. 操作手順

4.1. Loading Darts (Cobra RC-6 Blaster)

1. Insert one Official Nerf Elite dart into each of the 6 barrels at the front of the Cobra RC-6 blaster. Push the darts in firmly until they are seated.

4.2. Firing the Blaster (Cobra RC-6 Blaster)

1. ブラスターの準備: Pull the priming handle located at the bottom of the blaster all the way back until it clicks.
2. 標的： Point the blaster at your target, ensuring no one is in the line of fire.
3. 火： Press the trigger to launch one dart. The blaster will automatically rotate to the next loaded barrel.
4. Repeat steps 1-3 to fire all 6 darts.

5. メンテナンス

• クリーニング： Wipe down the blasters and targets with a damp 必要に応じて布を。水に浸さないでください。
• ダーツのお手入れ: Store darts in a cool, dry place to maintain their shape and performance. Avoid bending or crushing darts.
• ストレージ： Store the blasters and darts in a safe place away from direct sunlight or extreme temperatures.

6。 トラブルシューティング

• ダーツが発射されない:
  • ダーツがバレルに完全に挿入されていることを確認してください。
  • Verify the blaster is fully primed by pulling the handle all the way back until it clicks.
  • Check if the dart is damaged or bent. Replace with a new, official Nerf Elite dart if necessary.
• Blaster Jamming:
  • Remove any jammed darts carefully. Do not force the priming handle or trigger.
  • Ensure only official Nerf Elite darts are used.

7. 仕様

8. 保証とサポート

保証情報やカスタマーサポートについては、メーカーの公式ウェブサイトをご覧ください。 web販売店のウェブサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証内容は地域や販売店によって異なる場合があります。