TecTake 800747
TecTake 403238 / 800747 回転オフィスチェア 取扱説明書
モデル: 800747
導入
This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.

Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.
安全に関する注意事項
怪我や椅子の損傷を防ぐために、次の安全ガイドラインを守ってください。
- Ensure all components are securely fastened before use. Regularly check and tighten screws.
- 椅子の最大重量容量を超えないでください (仕様を参照)。
- 椅子の上に立ったり、踏み台として使用したりしないでください。
- Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
- 転倒を防止するために、椅子を水平な場所で使用してください。
- 窒息の危険を防ぐため、梱包材は子供の手の届かないところに保管してください。
- Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.
コンポーネントリスト
組み立てを始める前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足または損傷している場合は、組み立てを続行せず、カスタマーサポートにご連絡ください。
- 背もたれ
- シートクッション
- アームレスト(左右)
- メカニズムプレート(シート下)
- ガスリフトシリンダー
- ガスリフトカバー
- XNUMXつ星ベース
- キャスター(5個)
- ハードウェア(ネジ、ワッシャー、六角レンチ)
組み立て手順
Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Step 1: Attach Casters to the Base
5つのキャスターを、5つ星ベースの各脚の先端にある穴に差し込みます。カチッと音がするまでしっかりと押し込みます。
ステップ2:ガスリフトを挿入する
Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.
Step 3: Attach Mechanism Plate to Seat
Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.

Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.
Step 4: Attach Armrests to Seat and Backrest
Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.
ステップ5:シートアセンブリをガスリフトに接続する
Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.

画像: 正面 view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.
Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.
操作手順
Your TecTake office chair offers several adjustments to customize your seating experience:
高さ調整
座席の高さを調整するには、座席の下の右側にあるレバーを見つけます。
- シートを上げるには: レバーを持ち上げながら体重をシートから離してください。シートは自動的に上がります。希望の高さでレバーを離してください。
- シートを下げるには: Lift the lever while remaining seated. The seat will lower. Release the lever at the desired height.
Tilt Function and Lock
The chair features a tilt mechanism allowing the backrest and seat to recline together.
- To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
- 傾きをロックするには: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.
チルトテンション調整
Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.
- To increase tension (harder to recline): ノブを時計回りに回します。
- To decrease tension (easier to recline): ノブを反時計回りに回します。
メンテナンス
定期的なメンテナンスを行うことで、オフィスチェアの寿命と外観を長持ちさせることができます。
- クリーニング: 合成皮革の張り地の場合は、柔らかくて乾いた布で拭いてください。amp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
- フレームとベース: 金属やプラスチック部品を広告で拭くamp 布。
- キャスター: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
- ハードウェア: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
- 過負荷を避ける: Do not exceed the chair's stated weight capacity.
トラブルシューティング
椅子に問題が発生した場合は、次の一般的な問題と解決策を参照してください。
- 椅子のきしみ音:
Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
- 椅子の高さが調整できない:
Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.
- 椅子が不安定/ぐらつく:
Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.
- キャスターがスムーズに回転しない:
Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.
仕様
| ブランド | TecTake |
| モデル番号 | 800747 |
| 色 | 黒 |
| 材料 | Polyurethane, Faux Leather, Pine Wood (frame) |
| アイテム重量 | 16.7キログラム |
| 推奨用途 | オフィス |
| 特集 | 堅牢な構造 |
寸法(概算)

Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).
- Overall Height: 115-123 cm
- Seat Height (adjustable): 47-55 cm
- シート幅: 55 cm
- 座面の奥行き: 52 cm
- Backrest Width: 48 cm
- Armrest Height (from seat): 68.5-76.5 cm
- Base Diameter: 67 cm
保証とサポート
Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.
ぜひご訪問ください TecTake Brand Store on Amazon 詳細についてはこちらをご覧ください。
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.