DEVMO PIR-8 Automatic DC 12V-24V Infrared Motion Sensor Switch User Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your DEVMO PIR-8 Automatic DC 12V-24V Infrared Motion Sensor Switch. Please read this manual thoroughly before use to ensure proper function and safety.

製品の特徴

Infrared detection controller, designed to control load switches using infrared detection.
LED lighting motion sensing switch with an adjustable OFF delay timing function from 1 to 10 minutes.
Activates ON when motion is detected within its field of view. The ON time hold is adjustable after motion ceases.
PIR (Passive InfraRed) sensor offers an effective range of 16 feet, with diminished sensing up to 26 feet for moving human bodies.
The PIR Dome Lens provides a nominal 60-degree field of view.
Operates on 12V or 24V DC and can switch up to a 6A load.

仕様

アイテム	詳細
アイテム名	Body Sense Infrared LED Strip Controller
電源Vol。tage	12-24V DC
出力巻tage	12-24V DC
最大負荷電流	6A
電磁調理器	8m (approximately 26 feet)
有効範囲	16フィート
PIR Dome Lens Field of View	60 degrees nominal
アイテム重量	0.05キログラム（1.58オンス）
色	黒
取り付けタイプ	壁掛け

パッケージ内容

1pc x DEVMO PIR-8 Body Sense Infrared LED Strip Controller

製品終了view

DEVMO PIR-8 Motion Sensor Switch, top view showing the PIR dome and green terminal block. — 図1：上 view of the DEVMO PIR-8 Motion Sensor Switch, highlighting the PIR dome and the green terminal block for wiring connections.

DEVMO PIR-8 Motion Sensor Switch, front view showing input/output labels and adjustment dial. — 図2: 前面 view of the DEVMO PIR-8 Motion Sensor Switch, displaying the input and output labels, and the adjustable time delay dial.

DEVMO PIR-8 Motion Sensor Switch, bottom view showing mounting holes and quality control sticker. — 図3：下 view of the DEVMO PIR-8 Motion Sensor Switch, showing the mounting holes for installation and a quality control sticker.

The DEVMO PIR-8 motion sensor switch is a compact device designed to automate lighting based on human motion detection. It features a passive infrared (PIR) sensor, a terminal block for power input and load output, and an adjustable dial for setting the delay time.

セットアップとインストール

1. 取り付け

Select a suitable location for mounting the sensor. The sensor has a 60-degree field of view and an effective range of 16 feet (up to 26 feet with diminished sensing). Mount the device using the integrated mounting holes on a stable surface, such as a wall or ceiling, ensuring it has a clear line of sight to the area where motion is to be detected.

2. 配線接続

The sensor operates on 12V-24V DC. Ensure the power source is disconnected before making any wiring connections to prevent electrical shock or damage to the device.

入力接続: Connect the 12V-24V DC power supply to the "INPUT 12/24V" terminals. Ensure correct polarity: positive (+) to positive, and negative (-) to negative.
出力接続: Connect your LED light or other 12V-24V DC load to the "OUTPUT 12/24V" terminals. Ensure correct polarity. Important: The sensor switches the ground (negative) side of the circuit. Ensure your load's positive terminal is connected directly to the power supply's positive, and the load's negative terminal is connected to the sensor's negative output.

Warning: Incorrect wiring, especially regarding polarity or switching the wrong side of the circuit, can lead to malfunction or damage to the sensor and connected devices. Always verify wiring before applying power.

Video 1: This video demonstrates the DEVMO PIR-8 Automatic DC 12V-24V Infrared PIR Motion Sensor Switch, showcasing its physical features and potential applications. It provides a visual overview 製品の。

操作手順

遅延時間の調整

The DEVMO PIR-8 features an adjustable dial on its side (refer to Figure 2) to set the OFF delay time. This dial allows you to configure how long the connected load remains active after motion is no longer detected. The delay can be set from 1 to 10 minutes.

Rotate the dial clockwise to increase the delay time.
Rotate the dial counter-clockwise to decrease the delay time.

Experiment with different settings to find the optimal delay for your specific application and environment.

Video 2: This video provides another perspective on the DEVMO PIR-8 Automatic DC 12V-24V 8A Infrared PIR Motion Sensor Switch, potentially showing its features or operation in more detail.

メンテナンス

クリーニング： Keep the PIR dome lens clean and free from dust or obstructions. Use a soft, dry cloth to gently wipe the lens. Do not use abrasive cleaners or solvents.
検査： Periodically check wiring connections to ensure they are secure and free from corrosion.
環境： Ensure the sensor is not exposed to direct sunlight, extreme temperatures, or excessive moisture, as these can affect performance and lifespan.

トラブルシューティング

問題	考えられる原因	解決
動きに応じてライトが点灯しません。	センサーに電力が供給されていません。配線が正しくありません。センサーが遮られています。 Load (LED light) is faulty.	電源の接続とボリュームを確認してくださいtage. Verify wiring according to the "Setup and Installation" section, especially polarity and output switching. Ensure the PIR dome is clear of obstructions. Test the LED light directly with a power source.
ライトは継続的に点灯します。	一定の動きが検出されました。 Incorrect wiring (e.g., load connected directly to power, or sensor switching positive instead of negative). センサーの故障。	Ensure the sensor is not in an area with constant movement or heat sources. Re-check wiring, especially the output connection. The sensor switches the ground side. Ensure the load's positive is directly connected to the power source's positive, and the load's negative is connected to the sensor's negative output. If wiring is correct and no motion is present, the sensor may be faulty.
ライトが消えるのが早すぎる、または遅すぎる。	Delay time setting is incorrect.	Adjust the delay time dial on the side of the sensor as described in "Operating Instructions".

保証とサポート

For warranty information or technical support, please contact DEVMO customer service through your purchase platform or visit the official DEVMO webサイトでご確認ください。購入証明として購入レシートを保管してください。

DEVMO PIR-8

導入