Phanteks Eclipse P400A Digital ATX Mid-tower Instruction Manual

1. はじめに

This manual provides detailed instructions for the Phanteks Eclipse P400A Digital ATX Mid-tower chassis. It covers essential information regarding the product's features, setup, operation, and maintenance to ensure optimal performance and longevity. The Eclipse P400A is designed for high airflow and features a full metal mesh front panel, tempered glass side panel, and integrated Digital-RGB lighting.

2. 主な特徴

• 最適な冷却性能： Features an ultra-fine performance mesh front panel for maximum airflow and a tempered glass side panel.
• 広々とした室内: Supports up to E-ATX motherboards, 280/360mm radiators in the front, and vertical GPU mounting (with optional bracket PH-VGPUKT_02).
• Integrated Digital-RGB Controller: Includes three pre-installed D-RGB fans that can sync with compatible motherboards for customizable lighting effects.
• Extensive Storage Options: Provides six HDD positions (two trays included) and eight SSD mounting locations (two dedicated brackets included).
• Easy Accessibility I/O: Front panel includes 2x USB 3.0 ports, microphone and headphone jacks, power button, reset button, and D-RGB controller.

3. セットアップとインストール

Before beginning installation, ensure all components are accounted for and refer to your motherboard and component manuals for specific installation procedures. Always handle components with care and use anti-static precautions.

3.1 Unpacking the Chassis

Carefully remove the chassis from its packaging. Inspect for any damage during transit. Retain the packaging for future transport or storage.

Figure 3.1: Phanteks Eclipse P400A Digital ATX Mid-tower (White)

3.2 サイドパネルの取り外し

The tempered glass side panel is secured with thumbscrews. Carefully unscrew these and gently remove the panel. The opposite side panel can also be removed for cable management access.

3.3マザーボードの取り付け

1. I/O シールドをシャーシの背面開口部に取り付けます。
2. Align your ATX, micro-ATX, or mini-ITX motherboard with the pre-installed standoffs. For E-ATX motherboards up to 272mm wide, ensure optional HDD trays are not in use.
3. 付属のネジでマザーボードを固定します。

3.4 コンポーネントのインストール

• グラフィックカード（GPU）： Install your graphics card into the appropriate PCIe slot on the motherboard. The case supports GPUs up to 420mm in length. Vertical GPU mounting is supported with the optional PH-VGPUKT_02 bracket.
• CPUクーラー: CPUクーラーを取り付けます。ケースは高さ160mmまでのCPUクーラーに対応しています。
• ストレージドライブ: Utilize the dedicated SSD brackets and HDD trays for 2.5-inch and 3.5-inch drives respectively. The case offers extensive storage options with 6x HDD and 8x SSD mounting locations.
• 電源ユニット (PSU): Install the PSU in the designated compartment. The PSU clearance is 270mm.

3.5 ケーブル管理

The chassis provides 25mm of space for cable management behind the motherboard tray. Utilize the included velcro ties and routing channels to organize cables for improved airflow and aesthetics.

4. 操作

4.1 フロントI/Oパネル

The top front panel provides convenient access to essential controls and ports:

• 電源ボタン: 押すとシステムの電源がオンまたはオフになります。
• リセットボタン: 押すとシステムが再起動します。
• USB 3.0 ポート (x2): USB 3.0 対応デバイスを接続して高速データ転送を実現します。
• マイクジャック： マイクを接続します。
• ヘッドフォンジャック： ヘッドホンまたはスピーカーを接続します。
• D-RGB Controller Buttons: Used to cycle through various Digital-RGB lighting modes and colors for the pre-installed fans and compatible D-RGB products.

Figure 4.1: Front I/O Panel Overview

4.2 Digital-RGB Lighting Control

The integrated D-RGB controller allows for direct control of the lighting effects. Alternatively, if your motherboard supports Digital-RGB synchronization, you can connect the case's D-RGB cables to your motherboard's header and control lighting via motherboard software.

5. メンテナンス

5.1 ダストフィルターの清掃

To maintain optimal airflow and cooling performance, regularly clean the dust filters. The front mesh panel is designed for easy removal and cleaning. Other filters, such as those for the top and bottom fan mounts, should also be checked and cleaned periodically.

1. Gently pull the front mesh panel to detach it.
2. 柔らかいブラシまたは圧縮空気を使用して、蓄積したほこりを取り除きます。
3. Reattach the panel securely.

5.2一般的なクリーニング

Wipe the exterior surfaces of the chassis with a soft, damp 布で拭いてください。表面や強化ガラスにダメージを与える可能性のある、刺激の強い化学薬品や研磨剤の使用は避けてください。

6。 トラブルシューティング

• ファンが回転しない/RGBが点灯しない:
  • すべてのファン電源ケーブルがマザーボードのファン ヘッダーまたはファン コントローラーにしっかりと接続されていることを確認します。
  • Verify that the D-RGB cables are correctly connected to the integrated controller or the motherboard's D-RGB header.
  • ファン速度と照明制御については、マザーボードの BIOS/UEFI 設定または RGB ソフトウェアを確認してください。
• 空気の流れが悪い/気温が高い:
  • Clean all dust filters, especially the front mesh panel.
  • 吸気と排気を最適にするために、ファンが正しい方向に向いていることを確認します。
  • Verify that there are no obstructions to airflow inside the case, such as poorly managed cables.
• フロントI/Oポートが機能しない:
  • Check that all front panel connectors (USB, audio, power, reset) are correctly plugged into the corresponding headers on your motherboard.

7. 仕様

8. 保証とサポート

Specific warranty details are not provided in this document. For warranty information, technical support, or further assistance, please visit the official Phanteks website or contact their customer service directly. Ensure you have your product model number (PH-EC400ATG_DWT01) and proof of purchase available when seeking support.

公式ファンテック Webサイト： www.phanteks.com