TP-Link Archer CE1588 ルーター用アクセサリ USA 12V 1.5A AC/DC アダプター ユーザーマニュアル

導入

This manual provides essential instructions for the safe and effective use of your Accessory USA 12V 1.5A AC/DC Adapter. This adapter is designed to provide power to compatible devices, specifically the TP-Link Archer CE1588 Dual Band Wireless AC Gigabit Router. Please read this manual thoroughly before use and retain it for future reference.

安全情報

Adherence to the following safety guidelines is crucial for preventing damage to the adapter, the connected device, and ensuring user safety.

• Our products are certified to CE, FCC, and RoHS standards, indicating compliance with health, safety, and environmental protection requirements.
• The adapter incorporates Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard against electrical hazards.
• アダプタの容量を確認してくださいtageと amperage ratings match the requirements of your device (12V 1.5A).
• Do not expose the adapter to moisture, extreme temperatures, or direct sunlight.
• アダプターの分解や改造は避けてください。修理は資格のある担当者にご依頼ください。
• 使用していないときや雷雨のときは必ずアダプタを電源コンセントから抜いてください。

製品終了view

The Accessory USA 12V 1.5A AC/DC Adapter is a power supply unit designed for specific electronic devices. It converts alternating current (AC) from a wall outlet to direct current (DC) required by your device.

This image displays the black Accessory USA 12V 1.5A AC/DC Adapter. It features a compact rectangular body with a standard US two-prong plug on one end and a black power cord extending from the other, coiled and secured with a tie.

The adapter features a standard US plug for wall outlets and a barrel connector output plug for connecting to your device.

セットアップ手順

1. 互換性の確認: Before connecting, ensure your device requires a 12V DC power input with a current draw of 1.5A or less, and has a compatible barrel connector. This adapter is specifically compatible with the TP-Link Archer CE1588 Router.
2. デバイスに接続します: Insert the barrel connector end of the adapter's cable firmly into the power input port of your TP-Link Archer CE1588 Router.
3. 電源コンセントに接続します。 Plug the adapter's two-prong plug into a standard 120V AC wall outlet. Ensure the outlet is easily accessible.
4. 電源オン: Once connected, your device should receive power. Refer to your device's manual for specific power-on procedures.

操作手順

Once properly set up, the adapter operates automatically to provide continuous power to your connected device. No user intervention is typically required during operation.

• 過熱を防ぐため、アダプタは必ず換気の良い場所に設置してください。
• Avoid placing heavy objects on the adapter or its cable.
• If the adapter feels excessively hot, disconnect it immediately and check for proper ventilation or potential issues with the connected device.

メンテナンス

Proper maintenance ensures the longevity and reliable performance of your adapter.

• クリーニング： Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• ストレージ： 使用しないときは、直射日光や湿気を避け、涼しく乾燥した場所に保管してください。ケーブルを強く巻き付けると損傷する恐れがあります。
• 検査： Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires, bent pins, or cracks in the casing. If damage is found, discontinue use and replace the adapter.

トラブルシューティング

アダプタで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

仕様

保証とサポート

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Accessory USA directly through their official channels. Keep your purchase receipt as proof of purchase.