NZXT H710 ATX PC Gaming Case: Instruction Manual

導入

The NZXT H710 is an ATX PC gaming case designed for builders seeking enhanced cable management, tempered glass aesthetics, and water-cooling readiness. This case incorporates a patented cable management system, removable fan/radiator mounting brackets, and user-friendly drive trays. Key updates include a front-panel USB-C connector supporting high-speed USB 3.1 Gen 2 devices and a tempered glass side panel that installs with a single thumbscrew.

図1: 前面 view of the NZXT H710 ATX PC Gaming Case.

設定

初期セットアップとコンポーネントのインストールについては、次の手順に従ってください。

1. 開梱: ケースをパッケージから慎重に取り出し、輸送中の損傷がないか確認してください。
2. 内部へのアクセス: The tempered glass side panel is secured with a single thumbscrew. Loosen the thumbscrew and gently open the panel to access the interior.
3. マザーボードの取り付け: Install your Mini-ITX, MicroATX, ATX, or EATX motherboard onto the standoffs. Ensure all screws are tightened securely.
4. ケーブル管理 Utilize the patented cable routing kit with pre-installed channels and straps located behind the motherboard tray to organize power supply and data cables. This ensures a clean interior and optimal airflow.
5. ドライブのインストール: Install 3.5-inch and 2.5-inch storage drives into the easy-to-use drive trays.
6. 冷却システム: The case supports various cooling configurations. Two Aer F120mm fans are included for optimal internal airflow. Removable fan/radiator mounting brackets simplify the installation of either closed-loop or custom-loop water cooling systems. The removable bracket is designed for radiators up to 240mm.
7. フロントパネルの接続： Connect the front I/O USB Type-C port and other front panel connectors to your motherboard. The H710 features a consolidated front panel connector for ease of installation.

図2：内部 view highlighting cable management and drive bays.

Figure 3: Tempered glass side panel open for component access.

オペレーティング

Once all components are installed and connected, close the side panel and secure it with the thumbscrew. Connect your peripherals and power cable. The case is designed for optimal airflow to keep your components cool during operation. The front panel and PSU intakes include removable filters to prevent dust buildup.

Figure 4: Top I/O ports for convenient connectivity.

メンテナンス

定期的なメンテナンスは、PC コンポーネントの寿命とパフォーマンスの維持に役立ちます。

• ダストフィルターのクリーニング: Periodically remove and clean the dust filters located on the front panel and PSU intake. This prevents dust accumulation and maintains optimal airflow.
• インテリアクリーニング： Use compressed air to gently remove dust from internal components. Ensure the system is powered off and unplugged before cleaning.
• 外装清掃: 外側の表面を柔らかい布で拭きます。amp 布で拭いてください。仕上げや強化ガラスを傷つける可能性のある研磨剤入りの洗剤は使用しないでください。

トラブルシューティング

If you encounter issues with your NZXT H710 case, consider the following:

• 電源投入時の問題: Ensure all power cables, including the 24-pin ATX, 8-pin CPU, and GPU power connectors, are securely seated. Verify the front panel power switch cable is correctly connected to the motherboard.
• 空気の流れが悪い/気温が高い: Check that all case fans are spinning correctly. Ensure dust filters are clean and not obstructed. Verify that there is adequate space around the case for air intake and exhaust.
• Front Panel Port Malfunction: If a USB or audio port on the front panel is not working, check the internal cable connections to the motherboard. Ensure they are fully seated and correctly oriented.
• 強化ガラスパネル： Ensure the tempered glass side panel is properly aligned and the thumbscrew is tightened to prevent accidental detachment.

仕様

Figure 5: NZXT H710 case dimensions.

保証

The NZXT H710 ATX PC Gaming Case comes with a 2年間保証 ご購入日から1年間有効です。保証請求の際は、購入証明書を保管してください。保証は、通常の使用における材料および製造上の欠陥を対象とします。誤用、事故、改造、または無許可の修理による損傷は保証の対象外となります。

サポート

For further assistance, technical support, or warranty inquiries, please visit the official NZXT website or contact their customer service department. Detailed contact information can typically be found on the product packaging or the official NZXT support page.