MPC B-3744-105

MPC Complete Factory Remote Activated Remote Start Kit User Manual

モデル: B-3744-105

1. はじめにview

This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPC Complete Factory Remote Activated Remote Start Kit for 2011-2015 Acura RDX. This kit allows you to remotely start, warm, or cool your vehicle using your existing factory key fobs.

The kit includes a Crimestopper RS0 Add-on Remote Start module, a Fortin EVO-ALL Data Bypass Module, and a T-Harness. The firmware is preloaded, ready for programming to your specific vehicle. This system is designed for 2011-2015 Acura RDX C1-D2 models with Key-to-Start ignition and gas engines. It is compatible with automatic transmission vehicles only.

適切な機能と安全性を確保するために、インストールまたは操作を開始する前にこのマニュアルをよくお読みください。

MPC Complete Remote Start Kit components

図1.1:以上view of the MPC Complete Remote Start Kit components, including the main module, bypass module, wiring harnesses, and installation tip sheet.

2. Vehicle Requirements and Compatibility

Before proceeding with installation, ensure your vehicle meets the following requirements:

  • 車両モデル: 2011-2015 Acura RDX C1-D2
  • 点火タイプ: Key-to-Start ignition only. Not compatible with Push-to-Start vehicles.
  • 燃料タイプ: Gas engine only. Not for Hybrid vehicles.
  • 伝染 ; 感染: Automatic transmission vehicles only.
  • 地域: Product may not work in vehicles manufactured for sale outside of U.S. & Canada.
Vehicle compatibility chart showing key-start ignition is compatible and push-to-start is not

Figure 2.1: Visual representation of vehicle compatibility, emphasizing that only conventional key-start ignition systems are supported, not push-to-start or hybrid vehicles.

3. セットアップとインストール

This kit features a semi plug-and-play installation with a T-Harness, significantly reducing the number of required wiring connections compared to typical systems. However, some wiring connections will still be necessary. Detailed, step-by-step instructions with wire colors and locations are provided via a downloadable tip sheet.

3.1必要なツール(含まれていません)

  • ワイヤーストリッパー/クリンパー
  • 電気テープまたは熱収縮チューブ
  • Multimeter (recommended for verifying connections)
  • Basic automotive trim removal tools (a pry tool may be useful)
Yellow plastic pry tool with MPC logo

図 3.1: 元ample of a plastic pry tool, useful for safely removing interior trim panels during installation.

3.2 インストールプロセス終了view

  1. 準備: Disconnect the vehicle's battery. Access the necessary wiring harnesses and modules in your vehicle, typically behind the dashboard or steering column.
  2. モジュール接続: Connect the T-Harness to the vehicle's wiring and the remote start and bypass modules.
  3. 配線接続: Make any necessary hardwired connections as specified in the detailed tip sheet. These connections are crucial for proper system operation.
  4. モジュールプログラミング: Follow the specific programming steps for the Fortin EVO-ALL Data Bypass Module and the Crimestopper RS0 Add-on Remote Start. This typically involves a sequence of key turns and button presses.
  5. テスト: Reconnect the battery and test the remote start system thoroughly before reassembling the vehicle's interior.
  6. 再組み立て: Secure all modules and wiring, then reassemble the vehicle's interior trim.

A person with basic knowledge of car electronics wiring should be able to install this product successfully. For detailed instructions, refer to the exclusive copyrighted step-by-step installation tip sheet provided by MPC's professional technicians. A link to download this sheet will be provided with your purchase.

Gauge indicating ease of installation, with the needle pointing towards 'Easier'

Figure 3.2: An illustration suggesting the semi plug-and-play nature of the installation makes it easier than fully hardwired systems.

4. 操作手順

This remote start system utilizes your vehicle's existing factory key fobs, eliminating the need for additional remotes.

4.1 Starting Your Vehicle Remotely

To activate the remote start function, press the "lock" button three times on your factory key fob within a short succession. The vehicle's parking lights will flash, and the engine will start.

Various OEM factory key fobs for remote vehicle starting

図4.1:例ample of various OEM factory key fobs that can be used to activate the remote start system.

4.2 Remote Start Features

  • 実行時オプション: The system can be programmed for run times of 5, 10, 20, or 30 minutes. The default setting is typically 15 minutes.
  • 自動起動モード: Programmable 2, 3, or 4 hourly auto-start mode options are available. This feature allows the vehicle to automatically start at set intervals, useful in extreme weather conditions to maintain cabin temperature or battery charge.
  • Shutting Down Remotely: To turn off the vehicle remotely, press the "lock" button three times again on your factory key fob.
  • 車両への乗り込み: Once the vehicle is running via remote start, insert your key into the ignition and turn it to the "ON" or "RUN" position (do not turn to "START"). Press the brake pedal to disengage the remote start and take control of the vehicle.

5. メンテナンス

The MPC Remote Start Kit is designed for long-term reliability and typically requires minimal maintenance. However, periodic checks can ensure optimal performance.

  • 配線接続: Periodically inspect all wiring connections for any signs of wear, corrosion, or looseness. Ensure all connections remain secure.
  • モジュールの配置: Verify that the remote start and bypass modules are securely mounted and not exposed to excessive moisture or heat.
  • ファームウェアの更新: While firmware is preloaded, occasional updates may be released by the manufacturer for improved performance or compatibility. Check the MPC website or contact technical support for information on available updates and procedures.
  • バッテリーの状態: Ensure your vehicle's battery is in good condition, especially during colder months, as remote starting can place additional demands on the battery.

6。 トラブルシューティング

If you encounter issues with your MPC Remote Start Kit, refer to the following common problems and solutions:

問題考えられる原因解決
Vehicle does not start remotely.
  • Incorrect key fob sequence.
  • Hood pin switch engaged.
  • 車のバッテリー残量が少なくなっています。
  • Door/trunk/hood ajar.
  • Brake pedal pressed.
  • System not programmed correctly.
  • 配線の問題。
  • Ensure "lock" button is pressed three times quickly.
  • Check that the hood is fully closed.
  • 車両のバッテリー容量を確認してくださいtage.
  • すべてのドア、トランク、ボンネットが閉まっていることを確認してください。
  • Ensure no pedals are pressed.
  • Re-verify programming steps.
  • すべての配線接続を検査します。
Remote start activates but vehicle shuts off immediately.
  • Bypass module not programmed or faulty.
  • Incorrect wiring connection (e.g., tach signal).
  • Re-program the bypass module.
  • Verify all wiring connections, especially those related to ignition and engine status.
Remote start range is poor.
  • 干渉。
  • Weak key fob battery.
  • Move to an area with less radio frequency interference.
  • Replace the battery in your factory key fob.

If these steps do not resolve the issue, please contact MPC Technical Support for further assistance.

7. 仕様

特徴詳細
製品名Complete Factory Remote Activated Remote Start Kit
ブランドマルチPC
モデル番号B-3744-105
適合車両2011-2015 Acura RDX C1-D2 (Key-to-Start, Gas, Automatic Transmission)
リモートコントロールUses existing factory key fobs (3x lock press)
Run Time Options5, 10, 20, or 30 minutes (programmable)
Auto-Start Options2, 3, or 4 hourly (programmable)
寸法20.32 x 12.7 x 5.08 cm(製品)
重さ1.36キロ
メーカーMPC Products

8. 技術サポートと保証

8.1 テクニカルサポート

MPC provides U.S. based technical support for this product. If you have questions about installation, programming, or troubleshooting, assistance is available.

  • サポート時間: Monday through Friday, 9am to 5pm Arizona time.
  • 接触: Support tickets can be submitted 24/7 and are answered in the order received during business hours. Refer to the installation tip sheet or your purchase documentation for specific contact methods (e.g., email, phone number).
MPC Technical Support banner with a person wearing a headset smiling

Figure 8.1: MPC offers free expert technical support from Monday to Friday, 9am to 5pm MST.

8.2 保証情報

Specific warranty details are typically provided with your product purchase or can be found on the manufacturer's official website. It is recommended to retain your proof of purchase for warranty claims. The warranty generally covers defects in materials and workmanship under normal use.

For detailed warranty terms and conditions, please refer to the documentation included with your kit or visit the MPC Products webサイト。

© 2024 MPC Products. All rights reserved.

This manual is for informational purposes only. MPC is not responsible for improper installation or use.