Scott Essential Electronic Hard Roll Towel Dispenser

1. はじめに

The Scott Essential Electronic Hard Roll Towel Dispenser is designed for efficiency, performance, and value in various environments. This manual provides detailed instructions to ensure proper installation, operation, and maintenance of your dispenser, helping you achieve reliable and consistent towel dispensing.

2. 安全情報

Please read all safety instructions carefully before installing or operating the dispenser. Failure to follow these instructions may result in product damage or personal injury.

• Ensure the dispenser is securely mounted to a stable surface to prevent it from falling.
• Do not expose the electronic components to water or excessive moisture.
• Use only the specified type and size of paper towels to prevent jamming.
• Keep hands and fingers clear of the dispensing mechanism during operation.
• 電池は地域の規制に従って適切に廃棄してください。
• Do not attempt to repair the electronic components yourself. Refer to qualified service personnel.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• Scott Essential Electronic Hard Roll Towel Dispenser (Model 48860)
• 取り付け金具（ネジ、アンカー）
• 取扱説明書

4. インストールとセットアップ

4.1 壁面取り付け手順

1. Select a suitable wall location, ensuring sufficient clearance for operation and maintenance.
2. Hold the dispenser against the wall at the desired height and mark the mounting holes.
3. Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material.
4. 必要に応じて、ドリルで開けた穴に壁アンカーを挿入します。
5. Align the dispenser with the holes and secure it to the wall using the provided screws. Ensure it is firmly attached.

図1：側面 view of the dispenser, illustrating potential mounting points.

4.2 バッテリーの取り付け

The dispenser operates on batteries, offering extended life for up to 120,000 dispenses.

1. ディスペンサーのカバーを開けます。
2. バッテリー収納部を見つけます。
3. Insert the required number of D-cell batteries (typically 4) according to the polarity indicators (+/-).
4. 電池ケースをしっかりと閉めてください。

5. 操作

5.1 Loading Paper Towels

This dispenser is designed for 8" diameter x 8" hard roll towels, up to 950 feet in length.

1. ディスペンサーのカバーを開けます。
2. Place the new hard roll towel onto the spindle, ensuring it rotates freely.
3. Thread the leading edge of the paper towel through the dispensing mechanism as indicated by internal guides.
4. Ensure the paper is properly aligned and not creased.
5. ディスペンサーカバーをしっかりと閉めてください。

5.2 Dispensing Towels

The dispenser features an electronic sensor for touchless operation.

1. Place your hand beneath the dispensing opening.
2. The sensor will detect your hand and automatically dispense a pre-measured length of paper towel.
3. Tear the dispensed towel downwards against the cutting edge.

図2: 前面 view of the dispenser, showing the sensor area and towel exit.

6. メンテナンス

6.1 クリーニング

Regular cleaning helps maintain hygiene and dispenser performance.

• ディスペンサーの外側を柔らかくて乾いた布で拭いてください。amp 布と中性洗剤。
• 仕上げを損傷する可能性があるため、研磨剤入りのクリーナーや溶剤は使用しないでください。
• Clean the sensor area periodically to ensure proper detection.
• 電子部品に水分が入らないようにしてください。

6.2 電池の交換

Replace batteries when the low battery indicator illuminates or dispensing becomes inconsistent.

1. ディスペンサーのカバーを開けます。
2. コンパートメントから古い電池を取り外します。
3. Insert new D-cell batteries, observing correct polarity.
4. Close the battery compartment and dispenser cover.

7。 トラブルシューティング

一般的な問題とその解決策については、以下の表を参照してください。

8. 仕様

9. 保証と顧客サポート

This Scott Essential Electronic Hard Roll Towel Dispenser is backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Scott webサイト。

If you encounter any issues not covered in this manual or require further assistance, please contact Scott customer support:

• Webサイト： www.scottbrand.com (for general information)
• 顧客サービス： Refer to the contact information provided on the product packaging or the official brand web最新のサポート詳細については、サイトをご覧ください。