1.製品オーバーview
The AMIR 3-Channel Digital Thermometer Hygrometer is designed to monitor indoor and outdoor temperature and humidity across multiple locations. It features a main unit and three remote sensors, providing comprehensive environmental data for various scenarios such as homes, offices, greenhouses, and wine cellars.
主な特徴:
- 3-Channel Monitoring: Simultaneously displays temperature and humidity from the main unit and three remote sensors.
- 最大/最小記録: Records and displays the highest and lowest temperature and humidity readings over time.
- Clear HD LCD Screen: Easy-to-read display with humidity level indicators (Wet, Dry, Comfortable).
- バックライト機能： Provides clear visibility in low-light conditions; automatically turns off after 5 seconds.
- 多彩な取り付け: Supports both tabletop stand and wall-mounting options for flexible placement.
パッケージ内容:
- 1 x Indoor/Outdoor Thermometer Hygrometer Main Unit
- 3 x Remote Thermo-Hygrometer Transmitters
- ユーザーマニュアル x 1
2.セットアップガイド
2.1 バッテリーの取り付け
Ensure proper battery insertion for both the main unit and remote sensors.
- 本体: Requires 3 x 1.5V AAA alkaline or lithium batteries (not included). Open the battery compartment on the back of the main unit and insert the batteries, observing polarity.
- リモートセンサー： Each sensor requires 2 x 1.5V AAA alkaline or lithium batteries (not included). Open the battery compartment on the back of each remote sensor and insert the batteries, observing polarity.
画像: 裏面 view of the main unit and remote sensor, indicating battery compartments and mounting features.
2.2 センサーのペアリング
The main unit and remote sensors should automatically pair once batteries are installed. If a sensor does not connect, ensure it is within range and re-insert its batteries to initiate re-pairing.
Image: Simultaneous display of data from three remote sensors, illustrating their use in various environments.
3. 操作手順
3.1 LCD 表示オーバーview
The main unit's LCD screen displays indoor temperature and humidity, along with readings from the three remote channels. It also shows temperature and humidity trends, MAX/MIN records, and humidity comfort levels.
画像: 詳細 view of the LCD display, highlighting various indicators and readings.
3.2 Humidity Comfort Indicators
- ドライ： 湿度 < 45%
- 快適： 45% ≤ 湿度 ≤ 65%
- ウェット： 湿度 > 65%
3.3 ボタンと機能
- MIN/MAXボタン: 押すと view the maximum and minimum recorded temperature and humidity values. Press again to cycle through current, maximum, and minimum readings.
- ライトボタン: バックライトを5秒間点灯します。
- C / Fボタン： 摂氏 (°C) と華氏 (°F) の温度単位を切り替えます。
- チャンネルボタン: Cycles through the display of remote sensor channels (1, 2, 3) or displays all channels in rotation.
Image: The 3.6-inch large backlit LCD screen, demonstrating its readability in low light.
4.配置と取り付け
The main unit and remote sensors offer flexible placement options.
- 卓上スタンド: The main unit has a built-in stand for placement on any flat surface.
- ウォールマウント： Both the main unit and remote sensors have hang holes for easy wall mounting.
Image: Illustration of wall mount and tabletop stand options for the main unit and remote sensors.
For accurate outdoor temperature readings, ensure remote sensors are mounted in a shaded area, preferably on a north-facing wall, to avoid direct sunlight affecting readings.
5. メンテナンス
- クリーニング： Wipe the unit and sensors with a soft, damp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- バッテリー交換: ディスプレイに電池残量低下のインジケーターが表示されたら、電池を交換してください。必ずユニット内のすべての電池を同時に交換してください。
- ストレージ： ユニットを長期間保管する場合は、液漏れを防ぐためにすべての電池を取り外してください。
6。 トラブルシューティング
-
Q: Temperature sensor reads too high during the day.
A: Ensure the thermo-hygrometer remote sensor is mounted in a shaded area, ideally on a north-facing wall, to avoid direct sunlight. -
Q: Indoor and outdoor temperatures do not agree.
A: Allow up to one hour for sensors to stabilize due to signal filtering. Indoor and outdoor temperature sensors should agree within 2°C (sensor accuracy is ±1°C). If discrepancies persist, use a known accurate source to calibrate if your model supports it, or re-pair sensors. -
Q: Display console contrast is weak.
A: Replace the console batteries with a new set of fresh batteries. -
Q: Remote sensor not displaying data.
A: Check if the sensor is within the maximum transmission range (up to 100m/328ft in open air). Ensure there are no significant obstructions (e.g., thick concrete walls). Re-insert batteries in the remote sensor and the main unit to force re-pairing.
7. 仕様
| モデル： | JGUS-WA54W |
| 室内温度範囲： | 0°C ～ 60°C (32°F ～ 140°F) |
| 屋外温度範囲： | -40°C ～ 60°C (-40°F ～ 140°F) |
| 温度精度: | ±1°C (±1.8°F) |
| 室内湿度範囲： | 10%～99% RH |
| 屋外湿度範囲: | 10%～99% RH |
| 湿度精度: | ±5% (between 20% and 90% RH) |
| 応答時間: | 5秒 |
| 本体電源: | 3 x 1.5V AAA 電池 (別売り) |
| リモートセンサー電源: | 2 x 1.5V AAA batteries (not included) per sensor |
| 伝送範囲: | 屋外では最大100メートル（328フィート） |
| 色： | ホワイトウッド |
| 材料： | Wood (finish) |
| 本体寸法： | 95mm (3.74インチ) x 78mm (3.07インチ) x 20mm (0.79インチ) |
| リモートセンサーの寸法: | 53mm (2.09in) x 20mm (0.79in) (approx.) |
Image: Dimensions of the main unit and remote sensor.
8. 保証とサポート
AMIR provides a 45-day money-back guarantee and a 1-year warranty for this product. If you encounter any issues, please contact AMIR customer support for assistance. They guarantee to refund your money or replace the product if problems arise.
9. 使用シナリオ
The AMIR 3-Channel Digital Thermometer Hygrometer is suitable for monitoring environmental conditions in various locations, including:
- Bedrooms and Baby Rooms
- Offices and Workspaces
- Wine Cellars and Warehouses
- Greenhouses and Gardens
画像: Examples of various usage scenarios for the thermometer hygrometer.