PHILIPS StellarBright 929001818814

PHILIPS Stellar Bright 16W LED Bulb User Manual

Model: StellarBright 929001818814

1. はじめに

Thank you for choosing the PHILIPS Stellar Bright 16W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulbs. These bulbs are designed for indoor use, offering cool daylight illumination with energy-efficient LED technology.

PHILIPS Stellar Bright 16W LED Bulb packaging and product.

The image displays the PHILIPS Stellar Bright 16W LED Bulb alongside its retail packaging. The packaging highlights key features such as 82% energy saving and EyeComfort Technology. The bulb itself is a standard A-shape with a B22 base.

2. 安全情報

  • 電球の取り付け、取り外し、または清掃を行う前に、必ず電源をオフにしてください。
  • Do not use if the bulb or its packaging appears damaged.
  • この電球は屋内使用のみを目的として設計されています。
  • 電球を分解したり改造したりしないでください。内部にはユーザーが修理できる部品はありません。
  • Ensure the bulb is securely screwed into the fixture to prevent accidental detachment.
  • This bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage or malfunction.
  • 営業巻tage is 220-240 volts. Ensure your fixture's voltage はこの要件に一致します。

3. セットアップとインストール

3.1 開梱

Carefully remove the LED bulbs from their packaging. Inspect each bulb for any visible damage before installation.

3.2 インストール手順

  1. 電源を切ります: 電球を取り付ける器具を制御する照明スイッチまたは回路ブレーカーを見つけて、それをオフにします。
  2. フィクスチャの準備: If replacing an old bulb, allow it to cool completely before carefully unscrewing it from the fixture.
  3. 新しい電球を取り付ける: Gently screw the PHILIPS Stellar Bright 16W LED Bulb into the B22D base socket. Turn clockwise until it is snug, but do not overtighten.
  4. 電力を回復する: Turn the power supply back on at the switch or circuit breaker.
PHILIPS Stellar Bright 16W LED Bulb with B22 base.

クローズアップ view of the PHILIPS Stellar Bright 16W LED Bulb, highlighting its standard A-shape and B22D bayonet cap base, ready for installation.

4. 操作手順

Operating the PHILIPS Stellar Bright 16W LED Bulb is straightforward:

  • 電源オン/オフ: 標準の壁スイッチを使用してライトをオンまたはオフにします。
  • 調光不可: This LED bulb is designed to operate at full brightness only and is not compatible with dimmer switches. Using it with a dimmer may lead to flickering, reduced lifespan, or damage to the bulb.
Key features of PHILIPS Stellar Bright 16W LED Bulb.

This graphic illustrates the main benefits of the PHILIPS Stellar Bright 16W LED Bulb, including up to 82% energy saving, 16W power consumption, LED technology, and EyeComfort Technology for reduced eye strain.

5. メンテナンス

The PHILIPS Stellar Bright 16W LED Bulb requires minimal maintenance:

  • クリーニング: Ensure the power is off and the bulb is cool before cleaning. Use a soft, dry, lint-free cloth to wipe the bulb. Do not use liquid or abrasive cleaners.
  • 交換: When the bulb reaches the end of its operational life, replace it with a new PHILIPS Stellar Bright 16W LED Bulb or an equivalent LED bulb with a B22D base.
PHILIPS Stellar Bright LED Bulb providing eco-friendly lighting in a room.

An image showing the PHILIPS Stellar Bright LED Bulb installed in a wall fixture, illuminating a modern living space with soft, eco-friendly light. The room features a sofa with cushions and a minimalist design.

6。 トラブルシューティング

If you encounter issues with your PHILIPS Stellar Bright 16W LED Bulb, refer to the following common problems and solutions:

問題考えられる原因解決
電球が点灯しないフィクスチャに電力が供給されていません
電球がきちんとねじ込まれていない
電球の不良
フィクスチャの不良
電灯のスイッチと回路ブレーカーを確認してください。
電球がソケットにしっかりと締め付けられていることを確認してください。
Replace the bulb with a known working one.
Have the fixture inspected by a qualified electrician.
電球がちらつく調光スイッチと一緒に使用
接続が緩い
巻tage変動
Remove from dimmer circuit; this bulb is non-dimmable.
電球がしっかりと締められていることを確認してください。
電気技師に相談してくださいtag問題は依然として残ります。
光出力が低い電球ワット数が間違っているtage for desired brightness
Dust or dirt on bulb/fixture
Ensure the 16W bulb meets your brightness requirements.
Clean the bulb and fixture as per maintenance instructions.
High-quality LED lighting from PHILIPS Stellar Bright bulb illuminating an outdoor entrance.

The PHILIPS Stellar Bright LED Bulb is shown installed in an outdoor fixture, casting bright, high-quality light over the entrance of a building, demonstrating its suitability for various lighting needs.

7. 仕様

Detailed technical specifications for the PHILIPS Stellar Bright 16W LED Bulb:

特徴仕様
ブランドフィリップス
モデル名StellarBright
モデル番号929001818814_6
ライトタイプ導かれた
ワットtage16ワット
電球ベースB22D
明るい色涼しい日光
色温度6500ケルビン
営業巻tage220-240ボルト
光出力(最大)1440ルーメン
効率90 lumens per watt, Energy Efficient
光源の動作寿命15,000時間
特集省エネ、調光不可
材質タイプポリカーボネート(PC)
屋内屋外使用屋内
アイテム数(パック内)6 カウント
Item Weight (for pack)480グラム
PHILIPS Stellar Bright LED Bulb providing comfortable, eye-friendly light for a family.

This image depicts a family, including parents and children, comfortably relaxing in a bedroom illuminated by the PHILIPS Stellar Bright LED Bulb. The lighting is designed to be gentle on the eyes, promoting well-being.

8. 保証とサポート

8.1 保証情報

This PHILIPS Stellar Bright 16W LED Bulb comes with a 2年間保証 on the product from the date of invoice. Please retain your purchase receipt as proof of purchase for warranty claims.

8.2 Manufacturer and Importer Contact

For support, warranty claims, or further inquiries, please contact:

メーカー: Signify Innovations India Limited (formerly known as Philips Lighting India Limited)
PS ARCADIA CENTRAL, 3A, 3rd floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata – 700 017, India

輸入業者: シグニファイイノベーションズインドリミテッド
PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.