1. はじめに
This manual provides detailed instructions for the installation, operation, and troubleshooting of your Serounder 4-Digit PC Motherboard Diagnostic Card. This tool is designed to assist in quickly identifying computer failures by displaying diagnostic codes and providing audible alerts.
The diagnostic card is compatible with both PCI and ISA bus architectures, offering broad compatibility for various PC systems. It features a 4-digit display for error codes and a series of indicator lights to monitor critical system signals.
2.製品オーバーview
The Serounder 4-Digit PC Motherboard Diagnostic Card is an essential tool for computer maintenance and repair. It helps diagnose issues by intercepting and displaying POST (Power-On Self-Test) codes generated by the BIOS during system startup. These codes correspond to specific hardware conditions or errors, allowing technicians to pinpoint problems efficiently.
Image: The diagnostic card installed in a PC, displaying a 4-digit code.
画像: 正面 view of the diagnostic card, highlighting its components.
Image: Various angles of the diagnostic card, showing its design.
3. 特徴
- Accurately, stably, and quickly identifies computer failures.
- Utilizes a four-digit fault code display for clear error identification.
- Includes audible alerts to report faults.
- Designed with anti-insertion and misinsertion protection to prevent damage to components.
- Compatible with both ISA bus and PCI bus slots.
Image: Close-up of the diagnostic card's buttons and main chip.
4. セットアップ
- 電源を切る： Ensure your computer system is completely powered off and unplugged from the main power source before installation.
- ケースを開く: マザーボードにアクセスするには、コンピューターのケースを開きます。
- スロットの位置: Identify an available PCI or ISA expansion slot on your motherboard.
- カードを挿入： Carefully align the diagnostic card with the chosen slot and firmly press it down until it is securely seated. Ensure it is fully inserted to establish proper contact.
- ケースを閉じる: コンピューターのケースを閉じて、電源ケーブルを再接続します。
5. 操作手順
Once the diagnostic card is installed, power on your computer. The card will automatically begin to display POST codes as the system initiates. Observe the 4-digit display and the indicator lights for diagnostic information.
Image: The diagnostic card actively displaying codes during system operation.
5.1. Indicator Functions
The diagnostic card features several indicator lights, each corresponding to a specific system signal. Understanding these indicators is crucial for accurate diagnosis:
- CLK（クロック）： For both ISA and PCI, this light should be on when the board is powered, even without a CPU. If off, the CLK signal is faulty.
- BIOS： This light will flash when the motherboard is running and there is activity (reading) on the BIOS.
- IRDY (Initiator Ready): This light will flash when an IRDY signal is present. If it does not light up, there is no IRDY signal.
- OSC（発振）： When the board is powered on (empty board), this light should be constantly on if the ISA slot has main vibration. If off, there is an oscillation failure.
- フレーム： This light will flash during a circular frame operation. It will be constantly on during idle periods.
- RST（リセット）: This light indicates the reset signal.
- リセット： Upon power-on or pressing the RESET switch, this light will illuminate for approximately half a second and then turn off. If the light remains on, it indicates a problem with the motherboard's reset pin connection (e.g., connected to an acceleration switch) or a faulty reset circuit.
- 12V： When the board is powered on (empty board), this light should be constantly on. If off, it indicates a voltage issue or a short circuit on the motherboard.
- -12V: Similar to the 12V indicator, this light should be constantly on when the board is powered. If off, it indicates a voltage issue or a short circuit.
- 5V： Similar to the 12V indicator, this light should be constantly on when the board is powered. If off, it indicates a voltage issue or a short circuit.
- -5V: This indicator is specific to ISA slots. It should be constantly on when the board is powered. If off, it indicates a voltage issue or a short circuit.
- 3V3: This 3.3V voltage indicator is unique to PCI slots. When the board is powered on (empty board), this light should be constantly on. Note that some PCI slot motherboards may not provide this voltage, in which case the light will be off.
画像: 詳細 view of the diagnostic card's display and controls.
Image: Close-up of the diagnostic card's buttons and speaker.
6。 トラブルシューティング
- 表示なし: Ensure the diagnostic card is fully seated in the PCI or ISA slot. Verify that the computer is receiving power.
- 誤ったコード: Refer to your motherboard's BIOS manual for a comprehensive list of POST codes and their meanings. Codes can vary between BIOS manufacturers (e.g., AMI, Award, Phoenix).
- インジケーターライトが機能しない: Check for proper card insertion and ensure the motherboard is powered. Some older ISA slots may not provide all expected voltages。
- カードが認識されません: While the card operates independently of the OS, ensure the slot itself is functional. Try the card in a different slot if available.
7. 仕様
| 特徴 | 説明 |
|---|---|
| 使用法 | Maintenance tool for computer motherboards |
| コンポーネント | All produced by patch components |
| 画面 | LCD characters display (4-digit) |
| 色 | Green PCB (as shown in images) |
| パッケージ重量 | 48グラム |
| Compatible Bus | PCI, ISA |
画像: 裏面 view of the diagnostic card.
8. パッケージ内容
パッケージには以下のアイテムが含まれています:
- 1 x Serounder 4-Digit PC Motherboard Diagnostic Card
- 英語ユーザーマニュアル（本書）1冊
9. 保証とサポート
For warranty information and technical support, please refer to the documentation provided with your purchase or contact Serounder customer service through the official channels. Keep your purchase receipt for warranty claims.