1. はじめに
The Intex SX1500 Sand Filter Pump is designed to provide efficient and reliable filtration for your swimming pool, ensuring clean and clear water. This model features a 4m³/h flow rate, suitable for pools up to 24m³. Its digital control panel and integrated timer simplify operation, while the advanced filtration system effectively removes most residues. This manual provides essential information for the safe and proper installation, operation, and maintenance of your sand filter pump.
2. 安全情報
WARNING: Always ensure that all accessories are compatible with your pool and strictly follow all installation recommendations and safety guidelines provided in this manual. Failure to do so may result in serious injury or property damage.
- Read all instructions carefully before installing and operating this product.
- この機器は、安全に責任を負う人物による機器の使用に関する監督または指示がない限り、身体的、感覚的、または精神的能力が低下している人、あるいは経験と知識が不足している人（子供を含む）による使用を想定していません。
- 子供が機器で遊ばないように監督する必要があります。
- メンテナンスや清掃を行う前に必ず電源を切ってください。
- 電源コードまたはプラグが損傷している場合は、ポンプを操作しないでください。
- Ensure the pump is installed on a solid, level surface, away from the pool edge to prevent accidental immersion.
- すべての電気接続は資格のある電気技師が行い、現地の規制に従う必要があります。
3. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- Intex SX1500 Sand Filter Pump Unit
- Digital Control Panel with Integrated Timer
- 6方向バルブ
- Included Adapters (32/38mm) for hose connections
- 取扱説明書
Note: Hoses for connecting to the pool are typically sold separately.
4. セットアップ
Proper setup is crucial for the efficient operation of your sand filter pump. Follow these steps carefully:
- 配置: Position the sand filter pump on a firm, level surface, ideally below the water level of your pool for optimal performance. Ensure it is at least 2 meters (6.5 feet) away from the pool.
- Sand/Glass Media Installation: Open the sand tank and carefully add the recommended amount of filter sand or glass media. Refer to the product specifications for the correct quantity and type of media. Ensure the standpipe is centered during this process.
- ホースを接続する: Connect the inlet hose from your pool's skimmer/main drain to the pump's inlet port. Connect the outlet hose from the pump's return port to your pool's return jet. Use the included 32/38mm adapters as needed to ensure a secure, leak-free connection.
- 6-Way Valve Connection: Securely attach the 6-way valve to the top of the sand tank. Ensure all gaskets and O-rings are correctly seated to prevent leaks.
- 電気接続: Once all plumbing is complete and checked for leaks, connect the pump to a grounded electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD).
Image: A person is shown adjusting the 6-way valve on the Intex sand filter pump, which is positioned next to an Intex above-ground pool. This illustrates the typical setup process.
画像: 詳細な view of the Intex SX1500 Sand Filter Pump, showing the main unit, 6-way valve, pressure gauge, and hose connections. This provides a clear visual of the assembled product.
5. 操作手順
The Intex SX1500 features a user-friendly digital control panel and a versatile 6-way valve for various functions:
5.1. 6-Way Valve Functions
The 6-way valve allows you to select different operating modes. Always turn off the pump before changing the valve position.
- フィルター： This is the standard operating mode for daily pool water filtration. Water flows through the sand/glass media, removing impurities, and returns to the pool.
- バックウォッシュ： Used to clean the filter media. Water flows in reverse through the sand/glass, dislodging trapped debris, and is discharged through the waste port. Perform backwash when the pressure gauge indicates high pressure (typically 8-10 PSI above normal operating pressure).
- リンス： Used after backwashing to flush out any remaining debris from the filter media and settle the sand/glass. Water flows through the filter and is discharged through the waste port.
- 無駄： Bypasses the filter and sends water directly out the waste port. Useful for vacuuming heavy debris directly to waste or lowering the pool water level.
- 循環： フィルターをバイパスし、水をプールに直接循環させます。ろ過せずに薬品を混ぜるのに便利です。
- 休業： Shuts off all flow to the filter. Use this setting only when the pump is off and for maintenance tasks like cleaning the strainer basket.
5.2. Digital Control Panel and Timer
The digital panel allows for easy control and programming:
- オン/オフ: 押すとポンプのオン/オフが切り替わります。
- タイマー： Use the integrated timer to set automatic operating cycles. Consult the specific instructions in your full manual for detailed programming steps. Typically, you can set the desired operating hours, and the pump will run daily for that duration.
- FP (Filter Program): This setting allows the pump to run for a continuous period or according to a pre-set program.
6. メンテナンス
Regular maintenance ensures the longevity and efficiency of your Intex sand filter pump.
- 逆洗とすすぎ： Perform backwashing and rinsing regularly, especially when the pressure gauge indicates a rise of 8-10 PSI above its clean operating pressure. This cleans the filter media and restores filtration efficiency.
- ストレーナーバスケットのクリーニング： Periodically check and clean the pump's strainer basket. Turn off the pump, close the valve to the CLOSED position, open the strainer lid, remove and clean the basket, then reassemble.
- Sand/Glass Media Replacement: The filter sand typically needs replacement every 5 years. If using glass filter media, it generally lasts longer, approximately 9 years. Refer to your full manual for specific instructions on media replacement.
- 冬季： Before freezing temperatures, drain all water from the pump and filter tank. Store the unit in a dry, protected area.
7。 トラブルシューティング
If you encounter issues with your sand filter pump, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Pump does not start or has no power. | No power supply; tripped GFCI/RCD; damaged power cord/plug. | Check power connection; reset GFCI/RCD; inspect power cord for damage. If damaged, contact qualified service personnel. |
| Low water flow or pressure. | Clogged strainer basket; dirty filter media; air in the system; partially closed valves; low pool water level. | Clean strainer basket; backwash and rinse filter; bleed air from the system; ensure all valves are fully open; check pool water level. |
| Water not clearing. | Insufficient filtration time; dirty filter media; incorrect chemical balance; wrong filter media type. | Increase filtration time; backwash and rinse filter; test and adjust pool chemicals; ensure correct filter media is used. |
| Leaks around the pump or valve. | 接続が緩んでいる、O リング/ガスケットが損傷している。 | Tighten all connections; inspect and replace any damaged O-rings or gaskets. |
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | インテックス |
| モデル番号 | 26644FR |
| 流量 | 4 m³/時 |
| Suitable Pool Volume | 最大24m³ |
| 製品寸法（長さ x 幅 x 高さ） | 46 x 36 x 32 cm |
| 重さ | 8.55キログラム |
| 材料 | ポリプロピレン |
| 含まれるコンポーネント | 砂ろ過ポンプ |
| 色 | 白 |
| 原産国 | 中国 |
9. 保証とサポート
保証情報およびカスタマーサポートについては、製品に付属のマニュアルを参照するか、Intexの公式ウェブサイトをご覧ください。 website. Specific details regarding warranty periods and claims procedures are typically provided by the manufacturer.
Availability of spare parts information is currently unavailable through this document. Please contact Intex customer service for assistance with spare parts.