1。 オーバーview
This manual provides instructions for the installation, operation, and maintenance of the King Electric TKIT-2B Double Pole Built-in Thermostat Kit. This kit is designed for use with specific King Electric electric heater models, including PX, KT, KTW, PAW, W, and WHF. It functions as a snap-action, single-pole or double-pole integrated thermostat.
2. 重要な安全情報
警告: 感電の危険があります。設置または修理を行う前に電源を切ってください。
- 設置は、すべての地域および国の電気規則に従って、資格のある電気技師が行う必要があります。
- Ensure the power supply to the heater is completely disconnected at the circuit breaker before beginning any work.
- ボリュームを確認するtage and current ratings of the thermostat are compatible with your heater model.
- Do not operate the heater without the thermostat cover properly installed.
- 電気部品に子供を近づけないでください。
3. パッケージ内容
Carefully unpack the kit and ensure all items are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.
- TKIT-2B Thermostat Module
- Mounting Hardware (screws, nuts, etc., as applicable)
- 取扱説明書（本書）
4. インストール手順
This thermostat kit is designed for field installation or replacement in compatible King Electric heaters. Refer to your specific heater's manual for detailed access instructions.
- 電源を切る: Ensure the main power supply to the heater is turned OFF at the circuit breaker before proceeding. Verify with a voltageテスター。
- ヒーターコンパートメントへのアクセス: Remove the front cover or access panel of your King Electric heater to expose the wiring compartment where the thermostat will be installed. (Refer to your heater's specific manual for cover removal.)
- 配線を識別する: Locate the designated thermostat wiring connections within the heater. The TKIT-2B is a double-pole thermostat, meaning it interrupts both hot legs of a 240V circuit.
- サーモスタットの取り付け: Secure the TKIT-2B thermostat module into the designated mounting location within the heater's control compartment using the provided hardware. Ensure it is firmly seated.
- 結線：
- Connect the incoming power wires to the appropriate terminals on the thermostat.
- Connect the heater element wires to the corresponding output terminals on the thermostat.
- Ensure all connections are tight and secure. Follow the wiring diagram provided with your heater or the thermostat kit if available.
- カバーの交換: Carefully replace the heater's front cover or access panel, ensuring no wires are pinched.
- 電力を回復する： Turn the main power supply back ON at the circuit breaker.
- テスト操作: Proceed to the "Operation" section to test the thermostat's functionality.
Note: For single-pole applications, consult a qualified electrician or the heater's specific wiring diagram for proper connection.
5. 操作手順
The TKIT-2B is a mechanical, non-programmable thermostat designed for simple temperature control.
- 温度調整： Rotate the thermostat knob (if exposed on the heater's exterior) clockwise to increase the desired temperature setting, and counter-clockwise to decrease it.
- 加熱サイクル： When the ambient room temperature falls below the set temperature, the thermostat will activate the heater. When the room temperature reaches the set point, the thermostat will turn off the heater.
- オフ位置： Some heater models may have an "OFF" position integrated with the thermostat knob. Turning the knob fully counter-clockwise will typically turn off the heater.
Note: Allow some time for the room temperature to stabilize after making adjustments.
6. メンテナンス
The King Electric TKIT-2B thermostat requires minimal maintenance.
- クリーニング： Periodically, gently wipe the exterior of the thermostat knob and surrounding area with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- 検査： Annually, or if you suspect an issue, have a qualified electrician inspect the wiring connections for tightness and signs of wear. Ensure the thermostat is free from dust buildup.
- ユーザーが修理可能な部品はありません: The internal components of the thermostat are not user-serviceable. Do not attempt to open or repair the thermostat module.
7。 トラブルシューティング
If your heater is not operating as expected after installing the TKIT-2B thermostat, refer to the following common issues and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ヒーターが作動しません。 | ヒーターに電力が供給されていません。 サーモスタットの設定が低すぎます。 配線接続が緩んでいます。 | 回路ブレーカーを確認してください。 サーモスタットの設定を上げます。 (WARNING: Disconnect power) 配線接続を確認してください。 |
| ヒーターは連続的に作動します。 | サーモスタットの設定が高すぎます。 サーモスタットの故障。 | サーモスタットの設定を下げます。 If problem persists, contact a qualified electrician for inspection or replacement. |
| 温度制御が不正確。 | Thermostat sensor obstructed. Drafts near heater/thermostat. | Ensure nothing is blocking the thermostat's sensing area. Seal drafts if possible. |
トラブルシューティング手順を実行しても問題が解決しない場合は、King Electric のカスタマー サポートまたは資格のある電気技師にお問い合わせください。
8. 仕様
- モデル： TKIT-2B
- タイプ： Double Pole Built-in Thermostat Kit
- 互換性: King Electric heater models PX, KT, KTW, PAW, W, WHF
- コントロールタイプ: ボタンコントロール
- 接続プロトコル: Wi-Fi
注記： While product specifications list Wi-Fi connectivity, the TKIT-2B is a mechanical, non-programmable thermostat. Please refer to your heater's specific features for smart connectivity options. - バックライト: いいえ
- 国際コード: 093319173473
9.保証とサポート
For warranty information, please refer to the documentation included with your King Electric heater or visit the official King Electric webサイトでご確認ください。購入証明として購入レシートを保管してください。
For technical support or assistance, please contact King Electric customer service. Contact details can typically be found on the manufacturer's website or in your heater's manual.
キングエレクトリック Webサイト： www.king-electric.com